Q50 Splitter Install | Amazon Special 3 piece

Поделиться
HTML-код
  • Опубликовано: 4 дек 2024

Комментарии • 200

  • @nicodjulianto1733
    @nicodjulianto1733 5 лет назад +8

    Front lip really made this car looks so much better!!! I just received mine and just waiting to put them in. I heard that the people put resin on those middle piece because they come off easily, but I feel with the screw they are prob good enough, will see.
    Also, thanks for the video! It's crazy how I came across your exhaust car a couple months ago and now that I ended up with Q50 myself after looking for a new daily driver lol.
    Paddle shifter video helped me alot and I bet this front lip video would help me too! Cheers!

    • @SpeedCultureStudios
      @SpeedCultureStudios  5 лет назад

      Thanks for watching!!
      I think it’ll be secure with the screws and then bolts like I used. However, someone mentioned this morning that they used jbweld in those pockets, which couldn’t hurt. Might do it to be safe!

  • @adamliebman2906
    @adamliebman2906 2 года назад +2

    Been busy Chrome deleting my queue. Came across your video and I have this same splitter sitting in my garage I just had it delivered. Found your video. Thank you!! Guess what I'm doing this weekend? Thanks for the video

  • @artemiscool67
    @artemiscool67 5 лет назад +1

    Totally changed the look of the car. Damned near perfect.

    • @SpeedCultureStudios
      @SpeedCultureStudios  5 лет назад +1

      Haha thanks! Yes I really didn’t mind how it looked before and didn’t have very high expectations for the splitter, but once it was on, I was really diggin it!

    • @artemiscool67
      @artemiscool67 5 лет назад +1

      @@SpeedCultureStudios it's a really good look. Perhaps even better than the sport bumper 👍

    • @SpeedCultureStudios
      @SpeedCultureStudios  5 лет назад +1

      Arty Coole I think so actually!

  • @K9Swift
    @K9Swift 5 лет назад +7

    yessir we need more q50 vloggers ! im tryna get started as well dope car bro nice style !

  • @BillClay88
    @BillClay88 5 лет назад +1

    Looks awesome man! Proud of what you did with build and congrats on channel growth. I'm a murdered out type of person. Grill and badge need to be black. Screw contrast. Black out everything even if it's wrong. Lol.
    Sidenote, you were right about non sport calipers, when i asked you what wheels you recommend a while ago. I didn't realize how hard it is to find wheels to clear those let alone BBK. Doesn't matter what car you have. I bought after market wheels for civic and needed spacers. Biggest pain in ass.

    • @SpeedCultureStudios
      @SpeedCultureStudios  5 лет назад

      Thanks man! I appreciate the kind words. I’m a murdered out type as well but I have to stick with the silver emblems. I like them still lol.

  • @BoostInMotion
    @BoostInMotion 5 лет назад +6

    she look great and you fitted its good

    • @SpeedCultureStudios
      @SpeedCultureStudios  5 лет назад

      Thanks brother! I was surprised at how well it fit. You never know with this stuff sometimes! Really changed the look!

  • @joshthepimpj
    @joshthepimpj 5 лет назад +4

    Sweettttt! Dude your car is coming together so nice 👍🏼

  • @GettingthruLife
    @GettingthruLife 5 лет назад +3

    Love love love my top front, side and rear view cameras. Keeps my car off the curbs and parking blocks. Just wish i had a left/driver side down camera as i can't see right outside the door for curbs and low obstacles but there is a right. Also i would have loved to of gotten the backup/tilt down-side mirrors and electronic fold away side mirrors option.

    • @SpeedCultureStudios
      @SpeedCultureStudios  5 лет назад

      I’m torn when it comes to cameras, electronics, and moving parts! They are cool to have but expensive to replace when they stop working. And the DO stop working lol.
      I’d be fine going back to my older cars with all manual parts and no cameras haha

    • @GettingthruLife
      @GettingthruLife 5 лет назад +1

      @@SpeedCultureStudios ive stopped buy my vehicles and lease them. Benefits cheaper payments, never upside down when time to get a new one, and always under warranty. The cry then you don't own you vehicle but the people who finance their vehicle don't own them either. The other benefit is by leaseing you are always in a like new vehicle. Ive been buying my cars for 30 years and ive never kept one longer then 2 years.

    • @SpeedCultureStudios
      @SpeedCultureStudios  5 лет назад

      I’ve never kept one longer than 2 years either-many of them less than 18 months. AND I’ve always made money on the sale. That’s why stay away from leasing. But that’s a different topic haha

    • @GettingthruLife
      @GettingthruLife 5 лет назад +1

      @@SpeedCultureStudios Those are rare conditions your sitation of making money. Only way these days not to be upside down ever is put a sizable amount down or buy used and get a spectacular bargain.
      I bought a 1,500 odo used Yamaha R6 anniversary edition and cleaned it up and gave it love. I had it two years 13k mikes. Put an exhust on it, steering damper, zero gravity screen, no cut frame sliders, steel braided front lines. When i sold it i took off the main parts sold them and sold the bike for 500 more then i paid for it.
      www.flickr.com/photos/freelanceshots/6955169024/in/album-72157623614267941/

    • @GettingthruLife
      @GettingthruLife 5 лет назад +1

      @@SpeedCultureStudios You buy a vehicle/s used and drive for 1-2 years out of warranty or over warranty miles then highly likely depending on year/condition where you have the worries and or added cost of the repairs some very expensive. With this stated making the purchases you speak of less lucrative or maybe putting you in the hole. You buy any...any new car in the realm of reality and you dont put at least 5-7k cash down then your upside down when come to trade in 1, 2, 3, 4, 5...years later. Big benefits to trade in and that includes one which is time and resources which can be very costly. I never have 5-10k saved up just staring me in the face and i like to drive brand new vehicles with 24hr included roadside assistance.

  • @tricksta213lag5
    @tricksta213lag5 5 лет назад +1

    Congrats brother. The Black Dhalia is gonna look viscous. Godspeed.

  • @Foxcraze
    @Foxcraze 5 лет назад +1

    I’m sure you noticed already but I have the same lip and loved the look it gives the front. I put some jbweld in those 4 small mount points that connect the mid piece to the two outer pieces then set the screws in.

  • @theEroksaidso
    @theEroksaidso 5 лет назад +2

    Happy birthday man. Keep up with the good content bro

  • @vtecnegro85
    @vtecnegro85 5 лет назад +1

    I like your Q man, I have same color as yours. I like how you set yours up with the smartest choice of mods.

  • @threefive
    @threefive 5 лет назад +2

    Looks great, my next visual mod on to do list for Q50s for sure

    • @SpeedCultureStudios
      @SpeedCultureStudios  5 лет назад

      Thanks! Yeah completely changes the look! Not too expensive either!

  • @kcs.9744
    @kcs.9744 5 лет назад +2

    This thing looks and sounds fantastic. Nice taste and work man👌

  • @TheWaldo45
    @TheWaldo45 Месяц назад +1

    I just installed mine but I see through to the back I’m the middle there’s a gap but they line up good I saw it on yours alil is that how they go?

  • @oscars61743
    @oscars61743 5 лет назад +2

    She's coming out nice bro. Really liking the all black 👌🏽

  • @101mg
    @101mg 5 лет назад +2

    YOU KNOW I've been waiting for this. thanks for the video brother. maybe a update later on, on how it's holding up? you the best broski

    • @SpeedCultureStudios
      @SpeedCultureStudios  5 лет назад

      I’m all about updates! Stay tuned.
      I will say that I definitely know it’s there-quite a bit lower pulling in and out of driveways for example.

  • @huhSHUA
    @huhSHUA 5 месяцев назад +2

    What type of 3m tape do you recommend? And how come you removed the engine shield

    • @SpeedCultureStudios
      @SpeedCultureStudios  5 месяцев назад +1

      Don’t like the look of the engine cover. The typical 3m tape you find at Home Depot or Lowe’s is what I use. I don’t recall the weight, but it’ll be the strongest one you find on the shelf.

    • @huhSHUA
      @huhSHUA 5 месяцев назад +1

      @@SpeedCultureStudios thank you!

  • @tarzanjr337
    @tarzanjr337 4 года назад +1

    Just got my lip today!! Thanks for this video

  • @eriquelockwood284
    @eriquelockwood284 3 года назад +2

    Great vid. It really helped a lot. Love your page 🙏🏾

  • @cleanwhips3469
    @cleanwhips3469 5 лет назад +1

    Q looks awesome

  • @christopheramerally3194
    @christopheramerally3194 4 года назад +2

    I am assuming you had enough room to reach inside and catch the nut to hold down while tightening the bolt. Thus far only person on you tube from what I found doing it the correct way. How is the lip holding up any issues.

    • @SpeedCultureStudios
      @SpeedCultureStudios  4 года назад +2

      Yes you can get to the nuts. Absolutely necessary! I’ve never heard of anyone attaching splitters with just self-rappers and tape until I became part of this community lol. Splitter is still doing fine. Scrape everyday leaving work and she’s still holding strong!

    • @christopheramerally3194
      @christopheramerally3194 4 года назад +1

      Thanks glad to hear it’s holding up. I was a little nervous about the 3 piece NY winters and roads can be harsh. I am going to purchase from Redline360 they have a 3pc lip available for my 2018 Q50 Base model. Appreciate all the videos and tips you share.

    • @SpeedCultureStudios
      @SpeedCultureStudios  4 года назад

      christopher amerally Thanks!
      Just so you know in case you missed it-this is lip is actually for the 2018 base.

  • @miltonguerrero2217
    @miltonguerrero2217 5 лет назад +1

    Simply beautiful i am almost ready to buy a q50 soon

  • @4kBrady18
    @4kBrady18 5 месяцев назад

    could you point me in the right direction towards a good splitter for a 2014 Q50 premium?

  • @patac3245
    @patac3245 Год назад +1

    Thanks for the vid I just installed mine exactly the same but noticed a little sag like you said it would. I know you made some kind of bracket. How exactly did you do it because I’m trying to figure out a way? Did you drill another hole and do the same thing with fender washers? Thanks

    • @patac3245
      @patac3245 Год назад +1

      Sag in the middle*

    • @SpeedCultureStudios
      @SpeedCultureStudios  Год назад

      I actually just got a little piece of black plastic tube using it as a spacer. Cut it down to the right size, placed it between the splitter and the bumper and just ran another small bolt up through it.

    • @patac3245
      @patac3245 Год назад

      @@SpeedCultureStudios thank you so much

  • @huhSHUA
    @huhSHUA 7 месяцев назад +2

    Does the 3m tape help it hold over 100mph?

    • @SpeedCultureStudios
      @SpeedCultureStudios  7 месяцев назад +1

      If the surface is prepped properly, you won’t have any issues

    • @huhSHUA
      @huhSHUA 7 месяцев назад

      @@SpeedCultureStudios thanks

  • @spaxe7
    @spaxe7 Год назад +1

    Do you use a board to get car up and down on those rhino ramps? Mine barely gets up there now and its not lowered and doesn’t have a splitter. I’m assuming if I put on a splitter like yours rhino ramps won’t work anymore unless boards are used?

  • @akame7433
    @akame7433 5 лет назад +2

    Man you got it coming along really well. Keep up the good bro. Pretty soon you will have to hide the keys from the wife like me lol.

    • @SpeedCultureStudios
      @SpeedCultureStudios  5 лет назад

      Thanks! The wife is generally not interested in driving it. However, I have discovered that she has taken it to work a couple of times while I was out of town.

  • @Lyspi1
    @Lyspi1 Год назад +1

    just a dumb question but do i gotta make whole in my bumpber right?

  • @adiemk3300
    @adiemk3300 3 года назад +1

    the front lip you installed on your q50 is the same front lip splitter from last year's video. the question is have you changed the lip for another one?

  • @smithramirez2173
    @smithramirez2173 5 лет назад +1

    I got the 2014 where you got that from

  • @hbkx1377
    @hbkx1377 4 года назад +1

    What year is this?

  • @carlosbolanos5361
    @carlosbolanos5361 2 года назад +1

    What’s difference between these and the $100 ones ? Besides the price ? I’m looking for one for my Q50 ! The one from you’re description is out of stock

    • @SpeedCultureStudios
      @SpeedCultureStudios  2 года назад +1

      Hard to say what the difference is-they are all basically the same-unless they are single piece

  • @chunkyfolks369
    @chunkyfolks369 Год назад +1

    Would it fit a 2017?

  • @adiemk3300
    @adiemk3300 3 года назад +1

    If your car is a 2015 and the lip you bought is for new years then that means that no matter what year the lip is, it will fit any q50 year model?

    • @SpeedCultureStudios
      @SpeedCultureStudios  3 года назад

      Not necessarily. A 2015 lip will likely not fit the 2018 properly.

  • @DADDYHEAT23
    @DADDYHEAT23 3 года назад +1

    Can you use rivets to hold them in place or bolts are the best way to go

    • @SpeedCultureStudios
      @SpeedCultureStudios  3 года назад +2

      I suppose you could use rivets, but you need to distribute the force, so the washers are actually more important than the nut and bolt. A small rivet will just pull right through if you hit something.

    • @DADDYHEAT23
      @DADDYHEAT23 3 года назад +1

      Thank you I appreciate it. I will just use a washer bolt and nut.

  • @marcpotvin1650
    @marcpotvin1650 3 года назад +1

    I just got the 2014 Infiniti Q50 premium wondering if this fit as well???

  • @jasonechtaie1859
    @jasonechtaie1859 3 года назад +1

    Mine broke lol, but looking to buy another one and your link is sold out, any idea where else I can find one please and thank you!

  • @Cooltempo1482
    @Cooltempo1482 3 года назад +1

    What size are the bolts for the engine cover

  • @m.m14433
    @m.m14433 4 года назад +1

    Did you remove bumper to put nuts on for the bolts?

  • @m.m14433
    @m.m14433 4 года назад +1

    Looks great. Ill order this same one. How about a diffuser recommendation that isnt too expensive?

    • @SpeedCultureStudios
      @SpeedCultureStudios  4 года назад

      I actually don’t have a diffuser recommendation. I got a great deal on mine, but I had to work on it a lot to get it to fit nicely so I would not recommend it.

    • @m.m14433
      @m.m14433 4 года назад +1

      @@SpeedCultureStudios what diffuser do you have?

    • @SpeedCultureStudios
      @SpeedCultureStudios  4 года назад

      @@m.m14433 Its just an ebay special for now. It doesn't look bad, but I wouldn't recommend it. It took a lot of work to prep it and make it work. Not to mention I had to pain it.

  • @dylandawson7108
    @dylandawson7108 3 года назад +1

    Hey I’m looking to buy a splitter for my q50 but all the kinks I’ve found from you have been sold out. Any help?

  • @FrAndR0iD
    @FrAndR0iD 5 лет назад +2

    How long is the splitter from side to side?

    • @SpeedCultureStudios
      @SpeedCultureStudios  5 лет назад

      Never measured it. It probably an inch wider than the bumper on each side.

    • @FrAndR0iD
      @FrAndR0iD 5 лет назад

      @@SpeedCultureStudios could you do some measurements for me when you get the time plz? I would appreciate it. I think I'm going to retro-fit this splitter on the lip I have for my g37. Just need to how long it is, and the dimensions where it start to curve at the front to the outer edge.

  • @patsjoholm
    @patsjoholm 5 лет назад +1

    Looking sweet!

  • @jeivygarcia3428
    @jeivygarcia3428 3 года назад +1

    Was the car lowered already when you installed these? I want to buy those ramps was wondering if it will hit anything when trying to go up the ramp

    • @SpeedCultureStudios
      @SpeedCultureStudios  3 года назад

      Yes it was lowered. It’ll be too low for ramps unless you use a board on approach but also don’t go all the way up

  • @kndli67
    @kndli67 2 года назад +1

    I just purchased a 3rd brake light diffuser from Amazon hopes it comes in one piece 🤣

  • @chrisnichols6962
    @chrisnichols6962 5 лет назад +1

    Looks great!

  • @AJ-js4xi
    @AJ-js4xi 2 года назад +1

    Question. What did you do with the plasitc plate that covers the oil pan?

    • @SpeedCultureStudios
      @SpeedCultureStudios  2 года назад

      Threw it away and replaced it with a z1 undershroud

    • @AJ-js4xi
      @AJ-js4xi 2 года назад

      @@SpeedCultureStudios Still replying to comments 2 years after the post, i see you. I was curious because tbh i skimmed through the video, are you able to use the stock skid plate when you install the splitter or does it have to go? Thank you

  • @peejongc1266
    @peejongc1266 4 года назад +1

    Have u tried getting a automatic car wash with no problem?

    • @SpeedCultureStudios
      @SpeedCultureStudios  4 года назад +1

      Touch less, yes. Previous owner had been through them for sure-reason I did the paint correction

  • @turbo8890
    @turbo8890 5 лет назад +1

    Looks sharp! Also, love Chemical Guys..they have a lot of great products.

    • @SpeedCultureStudios
      @SpeedCultureStudios  5 лет назад

      They market very well, that’s for sure. There are other polishes out there that I like a bit better, but this was certainly a good deal for this kit!

    • @turbo8890
      @turbo8890 5 лет назад +1

      @@SpeedCultureStudios What do you prefer? My Q is black as well, so I always try extra hard to get that nice slick black shine to really show and last.

    • @SpeedCultureStudios
      @SpeedCultureStudios  5 лет назад +1

      Turbojugend Proper washing is important to not create swirls/cloudy finish. But I’ve always liked Maguiars quick detailer. I’ve used turtle wax black box with success on black cars. It’s a lot of work, but looks fantastic. The problem with this car is that Infiniti paint is so soft, it’s difficult to find anything that is really good with it. I’ll be trying out this chemical guys stuff very soon.

  • @NYAFACE817
    @NYAFACE817 Год назад

    How'd you get it down from the ramp with scraping the lip on it?

  • @tarotea123
    @tarotea123 3 года назад +2

    Is this for Q50 or Q50S? It will fit on my 2015 Q50?

    • @SpeedCultureStudios
      @SpeedCultureStudios  3 года назад +2

      Non sport

    • @tarotea123
      @tarotea123 3 года назад +2

      @@SpeedCultureStudios I think I will get it, thank you. Do you still have this mod till this day?

    • @SpeedCultureStudios
      @SpeedCultureStudios  3 года назад +2

      Yes over 2 years now!

    • @tarotea123
      @tarotea123 3 года назад +3

      @@SpeedCultureStudios I really appreciate how you always reply! I've always wanted an exhaust system on my Q50 2015 AWD. I want to copy your exhaust system because it sounds so good and its reasonable priced! I am on your amazon "Speed Culture Custom Exhaust" and I see a total of 4 pipes and 1 Exhaust Tip. I don't know anything about exhausts so I just plan on buying what you recommend and have the car store install it for me. The link I'm on is this one: www.amazon.com/shop/speedculturestudios?listId=2OIQDSX04XY3S.
      My question is : Which parts do I have to buy from those 5 items on your list? And after, what do I tell the engineer in the car store to do? Thank you so much for helping out a beginner.

    • @SpeedCultureStudios
      @SpeedCultureStudios  3 года назад

      @@tarotea123 Just check out the video I lay out the quantity of each. Otherwise, when you’re on the Amazon store, read the description of each item-I wrote some notes for reach to make it easy to follow. 1 borla, 2 resonators, 1 set of tips

  • @D0nt_trip3
    @D0nt_trip3 2 года назад +1

    I also bought a lip from eBay PP material and it broke coming out a driveway and my question is if I get a polyurethane lip will it be more durable and last longer ? Or is it simply because I’m lowered on Rsr super downs? This is my 2nd PP lip and they both broke 2nd day

    • @SpeedCultureStudios
      @SpeedCultureStudios  2 года назад

      Might be slightly more durable but you have to be careful man lol. I’m lowered over 2 inches and have had this same splitter for almost 3 years

    • @D0nt_trip3
      @D0nt_trip3 2 года назад +1

      @@SpeedCultureStudios yea I feel you about being careful but man LA roads are so trash and every driveway is different some are so steep.. maybe make a video on how to drive lowered car lol

    • @SpeedCultureStudios
      @SpeedCultureStudios  2 года назад

      @@D0nt_trip3 totally get it!

  • @PPGDV
    @PPGDV 5 лет назад +1

    It looks like your splitter kicks up in the front. Is it the camera angle or just me? I specifically looked for that because I had an amazon special and it nosed up as well and I didn’t like it.

    • @SpeedCultureStudios
      @SpeedCultureStudios  5 лет назад

      Depending on the angle really. Straight on it looks perfectly level. I’ve scraped a couple of times leaving very steep driveways so I think one side has a slight tilt now lol. The problem is the underside of the bumper is not level-has a slight slope. It’s all in how you mount it.

    • @PPGDV
      @PPGDV 5 лет назад +1

      Exactly. The bumper noses up and there are those platforms on the splitter. I know the brand I got they weren’t angled enough to counter the bumper angle but didn’t know how these were. It doesn’t seem as bad to me on yours but you’re also lowered and raked down a little better than mine with stock suspension.
      Overall, yours does look better than mine did and it’s great to know the newer years will also fit our years.

  • @nicodjulianto1733
    @nicodjulianto1733 4 года назад +1

    The lip still holding up good?

  • @Snowdawgs07
    @Snowdawgs07 4 года назад +1

    A year later, how have they held up??
    Just bought the 2019 Q50 luxe and have been watching all of your videos🤣

    • @SpeedCultureStudios
      @SpeedCultureStudios  4 года назад +1

      Perfect! Just put a little brace in to help resist sag

    • @Snowdawgs07
      @Snowdawgs07 4 года назад +1

      @@SpeedCultureStudios lol Sold!

  • @alpha5033
    @alpha5033 4 года назад +1

    Hey bro I recently bought a lip for my 2015 3.7 but it doesn’t seem to fit right or is there different lips for the sports model maybe I bought the wrong one , please help

    • @SpeedCultureStudios
      @SpeedCultureStudios  4 года назад

      Yes sport lip and no sport lip are much different.

    • @alpha5033
      @alpha5033 4 года назад +1

      I’m having trouble they all pretty much look the same , with different descriptions

    • @rchumsae
      @rchumsae 3 года назад

      @@alpha5033 I feel your pain dude, there are soooo many damn trim levels. I would
      Try to search your VIN

  • @alphav1537
    @alphav1537 5 лет назад +1

    Hey man have you decided to wrap the front grill?

    • @SpeedCultureStudios
      @SpeedCultureStudios  5 лет назад

      I actually think I’m going to try and paint it to see how it looks. If it sucks then I’m going to just get the gloss black grill. Not confident in my wrapping skills for the contours and I’m not paying anyone $200 to do it when I can get a complete grill for $150!

    • @alphav1537
      @alphav1537 5 лет назад +1

      Speed Culture Studios why don’t you just wrap the outer overlays black? I am thinking ab doing it

    • @SpeedCultureStudios
      @SpeedCultureStudios  5 лет назад

      That's what I'm talking about. The corners have a weird contour to them. Its probably not as hard as i'm thinking, but I just don't know if I want to lol.

  • @hbkx1377
    @hbkx1377 4 года назад +1

    What year is this Q50

  • @qzilla620
    @qzilla620 5 лет назад +3

    Looks good I got the carbon fiber pattern one still holding on 😄👍

    • @SpeedCultureStudios
      @SpeedCultureStudios  5 лет назад +1

      Nice. Considered carbon fiber, but not enough contrast with my black car to justify the price!

    • @steve_herold
      @steve_herold 5 лет назад +1

      Did yours fit better? Is it a 2014 - 2017

    • @SpeedCultureStudios
      @SpeedCultureStudios  5 лет назад

      Steve Herold fit better than what?
      The car is a 2015. The splitter is for 2018-2019 base. Fits great.

    • @qzilla620
      @qzilla620 5 лет назад +1

      @@SpeedCultureStudios I gotcha I got graphite shadow color

  • @deaddragonnjo5501
    @deaddragonnjo5501 5 лет назад +1

    will it fit the 2014?

    • @SpeedCultureStudios
      @SpeedCultureStudios  5 лет назад

      Sorry for the delay--Yes it should fit a 2014. Its the exact same bumper as my 2015.

  • @DG-888
    @DG-888 5 лет назад +1

    Im about to buy my q, cant wait to copy eveything u did to yours... lmao jus kidding great content keep it up man!

    • @SpeedCultureStudios
      @SpeedCultureStudios  5 лет назад

      Copy away lol! It’s a good setup and that’s why I’m documenting it and trying different things.

    • @DG-888
      @DG-888 5 лет назад +1

      @@SpeedCultureStudios it is, cant wait

  • @jonathandoodnauth2105
    @jonathandoodnauth2105 5 лет назад +1

    Link to front lip 👀???

    • @SpeedCultureStudios
      @SpeedCultureStudios  5 лет назад

      Sorry--Didn't see this comment!! I think link is in the description, but here you go:
      amzn.to/2VIFHti

  • @Finessyes
    @Finessyes 5 лет назад +1

    What year is your q50 ?

  • @xabiachurra8837
    @xabiachurra8837 5 лет назад +1

    car looks great🔥 how much did you lower car? and is it springs or coilovers?

    • @SpeedCultureStudios
      @SpeedCultureStudios  5 лет назад

      Thank you! It’s lowered on TEIN s tech springs for right now. Lowered about 1.25 inches all around.

    • @Berkay-vj8wu
      @Berkay-vj8wu Год назад

      @@SpeedCultureStudiosdo you use them with OEM shocks ? Have you noticed any change in comfort ?

    • @SpeedCultureStudios
      @SpeedCultureStudios  Год назад

      @@Berkay-vj8wu oem shocks. The Tein s tech ride great.

  • @kairobles444
    @kairobles444 2 года назад

    Anywhere else that would sell the front lip? It is sold out on amazon

  • @jasonechtaie1859
    @jasonechtaie1859 4 года назад

    What we’re all the screws and washers did you buy at Lowe’s?

    • @SpeedCultureStudios
      @SpeedCultureStudios  4 года назад +2

      Just bought some small bolts and fender washers and matching nuts. They can be whatever size you want basically. Just don’t go too small or too large.

  • @M33S23xX
    @M33S23xX 5 лет назад +2

    Good luck man mines fell of after 2 weeks lol

    • @SpeedCultureStudios
      @SpeedCultureStudios  5 лет назад +1

      You must not have used bolts. This thing is not coming off unless it gets ripped off.

    • @M33S23xX
      @M33S23xX 5 лет назад

      Speed Culture Studios yea i used 15 self tapping screws with washers thought that would hold it😂

    • @rchumsae
      @rchumsae 3 года назад +1

      @@SpeedCultureStudios I went through three of these. They are ABS and not urethane. These are the cheapo $45 lips but they look good! You did a good job on the install, I broke mine from driving in deep snow, hitting stuff, etc.

    • @SpeedCultureStudios
      @SpeedCultureStudios  3 года назад

      @@rchumsae deep snow will do it. Mine still holding strong. 2 years

  • @Cooltempo1482
    @Cooltempo1482 3 года назад +1

    The same day I put mine on it flew off on the interstate

  • @ibarrafamily5535
    @ibarrafamily5535 4 года назад +1

    Wheel specs?

    • @SpeedCultureStudios
      @SpeedCultureStudios  4 года назад +1

      19 x 9.5 +35

    • @ibarrafamily5535
      @ibarrafamily5535 4 года назад +1

      Speed Culture Studios and what wheels are those ? Bro your car looks bad ass...

    • @SpeedCultureStudios
      @SpeedCultureStudios  4 года назад +1

      @@ibarrafamily5535 Thanks!! These are the DR53 by Drag Wheels. They are a big supporter of the channel. Inexpensive, but great quality!

  • @jonathandoodnauth2105
    @jonathandoodnauth2105 5 лет назад +1

    Link to this front lip 😍😍😍👀

  • @101mg
    @101mg 5 лет назад +1

    MORE. VIDEOS. PLEASE.

    • @SpeedCultureStudios
      @SpeedCultureStudios  5 лет назад

      Coming haha! Been working on some house projects and organizing a car show for this weekend that has taken up a lot of time!

  • @Ciphersworld666
    @Ciphersworld666 3 года назад +2

    Bruh I lost my 2nd lip and I’m so fucking over it I only had this one for like 3 4 days

  • @JonathanMartinez-xs5ze
    @JonathanMartinez-xs5ze 5 лет назад +1

    @8:58....I came in my pants.

  • @ewwitsdavid97
    @ewwitsdavid97 5 лет назад +1

    Sport lip without even watching the video

  • @robertwashington6575
    @robertwashington6575 4 года назад +1

    Check out this install Q50 with a Audi front bumper.. what you think... ruclips.net/video/7kUd_eun6dw/видео.html

  • @geeteedan
    @geeteedan 5 лет назад +1

    😍😍

  • @101mg
    @101mg 5 лет назад +1

    what year is your q50?