Blessings primo! Man I saw a car like yours here in bklyn NY I was like sis he’s here holy crap lol. Everything looks like your car from the rims to the side skirt and license plate was from Florida too. Then I saw the front of the car and I said forget it, it’s not him 😂😂😂😂😂😂
I’ve been looking for videos on how to install it and they just show the before and after. I finally found the video on how to install it and very detailed. Thanks
You were doing everything right except your only mistake was not taping it rear to middle to front. What you did was rear to front to middle. That’s what caused the dip.
alright my summer project was to custom mod my dodge avenger... so far i've installed a front bumper lip, a diffuser, a rear wing and now will be installing a side skirts. It looks dope so far without the skirts on yet, bet it's gonna look even better with the side skirts.
First person I've seen to get them to sit mostly straight, everyone else had them sagging and looking horrible. I got these to install on mine when the weather gets nicer
Bout to do this on my 06 Altima. Have a good front lip and figured these would look good and eventually hold led underglows. Give it a touch of nostalgia. Lol. Sick ride too btw bro.
If you take off those mud flaps it should sit straighter 🤔 And look up burnt copper for the brake calipers. Something metallic would look good with those wheels
Dang fam i'm just now seeing this smh so on my joint I took off all the factory body pieces, modified the mudd flap thingy and I got the solo version of the side skirt. STILLEN makes a complete kit for our models however this way is affordable and it's custom ✌😁
Thank you. They are 19 I think the video before this one or after it’s around there explains my wheels and tires setup. I dont remember right now the tire size in know rear is 255 front 245
I bought the same front lip for my Audi A8 D4 and it came with red strip in the middle and I screwed it and drove on the highway and booom I heard some Weird noise and bam 💥 I saw it flew In pieces thru rear mirror lolll..
I like the car bro! I have 2014 Nissan Maxima as well and I have it fully straight piped and on some good wheels I live in the Orlando area let’s see when we can meet up and do some pulls‼️
I bought the exact same ones but I cant drill the screws into my car side skirts or rocker panel whatever u call it. Its a 2014 accord Lx plz help someone
@@HorsepowerLabs Does it screw into the pre existing screw holes from the factory skirt? Did you have to drill through the metal of the car? I haven't been under yet to see what I'm looking at. Lol Mines going on a GTI
What’s up guys! Hope you liked the video. In the description I have the links to most of my mods. Check it out!!
Blessings primo! Man I saw a car like yours here in bklyn NY I was like sis he’s here holy crap lol. Everything looks like your car from the rims to the side skirt and license plate was from Florida too. Then I saw the front of the car and I said forget it, it’s not him 😂😂😂😂😂😂
@@bornjamerican52 😂 you made my day bro.
@@HorsepowerLabs well I’m a class clown 🤡😂😂😂😂😂😂😂😂😂
@@bornjamerican52 nah bro I’m glad I have a friend up there
Just got me a 7th gen, man, just started watching this series and appreciate it man. Waiting for my black mesh grilles.
I’ve been looking for videos on how to install it and they just show the before and after. I finally found the video on how to install it and very detailed. Thanks
Glad I could help
You were doing everything right except your only mistake was not taping it rear to middle to front. What you did was rear to front to middle. That’s what caused the dip.
alright my summer project was to custom mod my dodge avenger... so far i've installed a front bumper lip, a diffuser, a rear wing and now will be installing a side skirts. It looks dope so far without the skirts on yet, bet it's gonna look even better with the side skirts.
First person I've seen to get them to sit mostly straight, everyone else had them sagging and looking horrible. I got these to install on mine when the weather gets nicer
They say a little after time tho
Bout to do this on my 06 Altima. Have a good front lip and figured these would look good and eventually hold led underglows. Give it a touch of nostalgia. Lol. Sick ride too btw bro.
Thanks bro I appreciate it. Make sure you measure correctly and use the metal things that come with it to hold it straight
Hey, I have an 06 atlética and wanted to do this too. Which one did you buy and did it look good?
If you take off those mud flaps it should sit straighter 🤔
And look up burnt copper for the brake calipers. Something metallic would look good with those wheels
Ima look into that. Thank you
i'm bolting mine with screws on all angles.... aint no way im relying on some damn tape lol
1.Holographic brake calipers, 2. or yellow, 3. maybe orange.
Ima look into first one
Damn the blue esr wheels🤌🔥🔥
Thank you. I like en too lol
Dang fam i'm just now seeing this smh so on my joint I took off all the factory body pieces, modified the mudd flap thingy and I got the solo version of the side skirt. STILLEN makes a complete kit for our models however this way is affordable and it's custom ✌😁
Nice Max bro! What's your wheel and tire setup? 18's?😊
Thank you. They are 19 I think the video before this one or after it’s around there explains my wheels and tires setup. I dont remember right now the tire size in know rear is 255 front 245
I bought the same front lip for my Audi A8 D4 and it came with red strip in the middle and I screwed it and drove on the highway and booom I heard some Weird noise and bam 💥 I saw it flew In pieces thru rear mirror lolll..
That’s my fear everything flying off.
no - it looks different in places because your car curves in by the doors --- why were you so afraid to put more screws in?
Neon green calibers
I have that and I put self tapping screws the whole way down
That is not going anywhere 😆
Just subbed, keep up the content bro you consistency will get you to the top 💯
Thanks bro appreciate it. Get ready for next video it’s 🔥
Side skirts is 🔥🔥🔥🔥🔥 on point
I like the car bro! I have 2014 Nissan Maxima as well and I have it fully straight piped and on some good wheels I live in the Orlando area let’s see when we can meet up and do some pulls‼️
I’m down bro 😎 hit me up @realgmaxine_
thanks for the video brooo
Blue to match the calipers I think 🤔
Something that pops though
Hey did you pre drill the side skirts and used the screws it came with or did you get self tapper screws
Pre drill the skirts first but I made sure I measure correctly where to place it
Are you able to put the side skirts on the car if it already has some on? Or do you have to take off the ones it comes with
You can keep the small ones on the car
I use screws and 30lb double sided gorilla glue tape
Yellow brake calipers😈
Might look 👀 🔥
That looks like the same ones that I have.
Might be
How hot is it there? Just ordered some and now im scared that they will bend in the sun😅 I live in Finland so its 30°c at max in the summer
It can get around 95 degrees here. Mine are saging
I bought the exact same ones but I cant drill the screws into my car side skirts or rocker panel whatever u call it. Its a 2014 accord Lx plz help someone
Why can’t you drill into it?
What kind of take did u use?
So I got side skirts and lip on eBay where do I screw the screws into?
Onto the body of the car. Front bumper for the lip and under side for skirts
@@HorsepowerLabs
Does it screw into the pre existing screw holes from the factory skirt? Did you have to drill through the metal of the car? I haven't been under yet to see what I'm looking at. Lol
Mines going on a GTI
@@anthonysanders6640 if you have pre drilled holes that would be great. Mine I had to put screws
I like it
Thank you. It’s super glossy too
Red paint
How would I go about doing this for a 1.2 Renault Clio? As they pretty much don’t have a skirt for this to attach to?.
So this is universal, meaning it can fit any car. You can cut and trim to make it fit
@@HorsepowerLabs Yes I know what you mean it’s just I don’t have anything for it to connect it as my car has no side skirts as it’s a mk2 1.2litre.
@@looksbroken3785 can you try to drill onto the side piece?
@@HorsepowerLabs there are holes where a splitter could be fitted maybe I can try to use them.
Skirt*
So u have to drill into your car?
Yes I drilled into the bottom side skirt to be safe
What size skirt was it bro
I believe 78.7 inches
Thanx. I was looking at both 78.8 & 86.
@@jaybreezey6945 you can always cut if anything
Brake cal same color luggage nuts
Salt collector 😂
to "low". You guys always make this very same mistake.
Lol yeah
that looks really cheap material
Bad installation try to run 120km / hr and i bet this side skirt will fly away from other car’s windshield
I’ve run 200km/ hr no problem. They held up so far.