Thank you for this video. I bought a similar lip on eBay last year for my Impreza, but I haven't put it on yet. I had an idea of how it goes on, but I wasn't sure where to start, since it did not come with any instructions. This video helps a lot and I will try to install mine soon.
the centre piece is supposed to sit under the 2 side pieces, then you have the middle spacers to fill the gap in middle so ends sit flush and more secure! nice video all the same!
I did mine 3 years ago on the rx8. Fitted the middle bit between the splash guard then the 2 ends under it with poles to hold it up. Been brilliant but now the sun made it look old. So got a new one. And going to skin carbon fibre over it and cut RX8 letters out each side and add led to light up the words at night
Easy steps, 1 direct drilled to centre with sharp screw already provided. Support 2side left and right with carjack. After centre, just direct screw both side. Then screw drill side wings 1 or 2 finger gap which you want. After all stitch, put another screw for all side. Done
longgar tu bang,cable tight daya tahan dia brp bulan je,masa saya pasang dlu (tahun lepas ) sisi 3 skru tengah 8 skru pastu beli lagi rodbar 2 batang untuk support tgh bru kukuh smpai skrng pakai,selalu diaorg complain senang tercabut sbb x kukuh
Thank you for this video. I bought a similar lip on eBay last year for my Impreza, but I haven't put it on yet. I had an idea of how it goes on, but I wasn't sure where to start, since it did not come with any instructions. This video helps a lot and I will try to install mine soon.
At least yours came with instructions. Ty for the vid & glad I’ve done a similar one to mine before. Wish me luck😅
Thank you and good luck
Great video.. I have same one so thanks for showing me how to install. From England 🏴
the centre piece is supposed to sit under the 2 side pieces, then you have the middle spacers to fill the gap in middle so ends sit flush and more secure! nice video all the same!
Cheers.
I was wondering about this. Thanks 👍🏼👍🏼
ada cara paling senang..overall, good effort
I did mine 3 years ago on the rx8. Fitted the middle bit between the splash guard then the 2 ends under it with poles to hold it up. Been brilliant but now the sun made it look old. So got a new one. And going to skin carbon fibre over it and cut RX8 letters out each side and add led to light up the words at night
Easy steps, 1 direct drilled to centre with sharp screw already provided. Support 2side left and right with carjack. After centre, just direct screw both side. Then screw drill side wings 1 or 2 finger gap which you want. After all stitch, put another screw for all side. Done
yes bro, thanks for sharing
Thank you i was put it wrong before, and after i watched your video its been fixed thanks 👌
actually i'm not sure if my steps are perfectly right or not, just follow my instinct ;)
Great a straight to the point, thanks!
Thanks bro :)
Nice video well done. did you screw it on to the bumper or the under carriage cover?
Tahniah saudara
Terima kasih tuan
thanks for the video .. mine didn't have instructions and the seller didn't know where I can find it so I wasn't sure how to install it ..
Hey man nice video. How does it hold up at higher speeds? Did it ever fall off?
longgar tu bang,cable tight daya tahan dia brp bulan je,masa saya pasang dlu (tahun lepas ) sisi 3 skru tengah 8 skru pastu beli lagi rodbar 2 batang untuk support tgh bru kukuh smpai skrng pakai,selalu diaorg complain senang tercabut sbb x kukuh
👍
Haritu ad pasanng kt wish,cuma x ikat cable tie,skirt yg tengh tu patah sebb laju sangt😭,ikat 2 skrew je
bertabah tuan..benda murah, sepadan dgn kualitinya...huhu
Can you explain how you screw on the rubbers I’m trying to figure mine out
What are the black rubbers called? I’ve lost one of mine and can’t find them online anywhere
Rubber spacer? Rubber padding? I'm also don't know, sorry ;p
guess the plane bringing u that wgack ebay crap didnt crash in the ocean . 😂
Ada link shoppe?
kalau gune ribet boleh tk? ade ape2 masalah or cepat tanggal?
ada drill original bumper ke?
ada tuan, drill utk skru bawah bumper tu, lepas tu ikat dgn cable tie pada lubang atau cangkuk sedia ada bawah enjin tu
kalau nak bukak bumper senang tak?
tak pernah try buka
Rubber tu ade jual dkt mne ye?.
mmg dpt sekali dgn front lip tu
Kukuh tak kalau kene waterjet?
Kukuh bro. Sebab dah ikat banyak poin dgn skru dan cable tie
@@jijoyazizul4416 betul juga tu..tq bro
Shut off that repetitive music.
Its crooked
Usted está más perdido en instalación que una aguja 🪡 en un pajar 😵💫🥴😵💫🥴
Looks like pain in the ass ,
gay😂
Use your lips....say words....lose the "music"..............PLEASE!