Thank you for the video. I've just get my cinebot25 without vtx and was looking for a tutorial how to disasamble and assemble it back without a pain. This is the only relevant video I found. Pefrect tip to keep 1 screew in o3 unit and secure it to a frame with only 3 screws.
Dude! For a complete noob like me trying to work out what to start with and wth Betaflight does, this video is just sooooo comprehensive! Amazing stuff bud, thanks so so much!
Great tutorial!! I just got this drone, and this video has helped a lot. Quick question: How do you remount the o3 camera onto the silicone balls?? The left side of mine popped loose after my drone went down in a field. Any help is appreciated!
I have a cinebot30 and I do live shows, I really like it because it can withstand the wind. In relation to cinebot25, what do you think during external flights?
Thanks you for the very detailed review and setup. I'm looking at this GepRC drone to make some real estate fly throughs. I already freetyle but I needed a small quad to take some smooth indoor shots. Thanks. 👍👍
Alright so I’m new at this. Can you assign a switch to have different rates so I could have say lower rates for indoor then flip I switch and the rates go up for raster rolls etc outdoors.
I just ordered one of these guy up. Keeping fingers crossed it ships fast from GEPRC. Your discount code basically paid for express shipping of this unit. While I was at it, I picked up a spare frame so I have all parts in case of a disaster. Thanks for showing off this setup as I will be doing the same thing with a zoro
Hey thanks for using my link man! Hope all the info I put out on this quad helps you. I’ll continue more videos for it. I’m glad my code got some good $$$ off for you! 🤙🏼🤙🏼🤙🏼 enjoy it! It’s 🔥🔥🔥
@@dronecamps I have been flying DJI since phantom1. I want to expand my horizons and learn FPV to offer more for clients. This guide is going to help a ton for my initial setup. And yes please show a GPS install on this thing!!
Newbie here. Thanks! Great tutorial. Can everything covered in this video guide be applied to the Cinebot30? Can Rate Profile 2,3,and 4 be set to a 3 way Aux switch?
You can give it a try. It is a completely different power system on this quad, so it may react differently. Just make sure you save it to a different profile and save your original settings on profile 1.
Great review Justin! I've been subscribed since my first quad, the legendary Eachine Trashcan. 4 yrs later that thing still rips on 2s. Thanks for everything, brother.
No kidding? Wow man the "Trashcan" funniest quad name ever. And you know what I still have mine. I should find it and fly it. That little guy was so much fun! - Thanks for the kind words. - Justin
Yup. Followed your mod guide and everything. You and Stu were the channels that first introduced me to FPV. Fast forward 5yrs and 50 quads later I'm loving this hobby more than ever. I've never commented on posts but I just thought you should know that brother. Appreciate you, homie @@dronecamps
I finally got my cinebot yesterday and this video helped me get it hooked right up. I also have a Pavo 20 with ridiculously detuned rates for indoor flight. The Pavo sticks are still pretty sensitive. Meaning small stick motions on pitch and roll still move it a lot. The Cinebot needs much larger stick movement. What setting changes this? Ideally I would love something in between.
@@SerialKoE yes expo for sure but a huge improvement was actually Betaflight 4.5. It behaves a bit differently in angle and horizon. For me it is a good thing.
Weird, I just got mine after I saw your recommendation and the ELRS receiver version I bought the receiver won't fire up with the USB, only with battery. That's a first for me
I am getting rxloss**** for like half a sec today, lucky everything is fine. I am using Radiomaster Boxer ELRS flying cinebot25s O3 with DJI goggles V2 like your setup. 1. Am I flying too far away? Its about 2 soccer fields with clear LOS. 2. Is lower Packet Rate like 50Hz has better range? 3. Does lower packet rate provide better range but slower response? 4. Does higher TX Power provide better penetration when flying behind obstacles? 5. Approximate how far can I go with your ELRS setting?
Anyone know where I can get a run cam thumb pro mount for this? The normal one that fits around the camera. The bottom part is too thick for the tiny little mount that comes with this drone.
It’s different. I’m assuming the prop guards are going to hold up better than the Cinelog series quads. When I hit the bench I thought I had broken the prop guards.
Have you done a detailed video like this for the Cinelog 25V2 I’ve recently bought a Bind n fly one from GEPRC. One of the props is touching the prop guard/duct. Not very good for a brand new item to be honest, and gutted that the Cinebot 25 came out just after I purchased the log. ;)
Also, how to go about having more that one quad as this Cinelog is my second Bind n Fly so I need to be able to be going back and forth between the 2. I’m in the U.K. so can’t really be sending it in to you I doubt
I have no idea how much it matters, but your sticks should go 1000-2000 in betaflight. Yours seem to go below 1000 and above 2000. You can fix that in your radio's configuration.
Hey man I don’t want to shame you for the cad but I just want you and botgrinder to make up dude there doesn’t need to be beef in the hobby- all love ❤
@@dronecamps want my advise, don't proceed with the cad shoot him a message and just talk about it man no one needs to be in legal trouble over this its just silly
I'll continue to evangelize that people should use pre-arm. I personally use "Yaw-Trim-Right" for this mode on my Boxer which is easy to use but hard to press accidentally. I nearly got bitten once before I added pre-arm to my quads. I know it's stopped at least one possible accident.
Justin can you post your Betaflight backup file for this. I completely jacked my files somehow trying to get my GPS and remote ID working. I lost everything and somehow corrupted my backups. I messaged GEPRC and have not heard back anything yet. And they do not have the stock setup files on the site. They have the Cinelog but not the Cinebot.
wow, this is a super helpfull and good struckured video. top for beginners and advanced or pro. also to have difrent rates for difrent szenarios is super good. keept it up!
Great idea in giving rates profiles, set up, and outlining the review. Wish more reviewers would do this and I think you are on to something if you make it a common part of reviews. I see what you are doing here. After all the drama (and I wasn't on your side - on this issue), it seems you took some critiques to heart. You are a knowledgable FPV reviewer and pilot and I have enough grace to stay with you despite my opinion on the recent skirmish.Great review.
Anyone breaks these and they did something seriously wrong. Its 6 bolts to release and replace. I wouldnt call that a fail on Geps part. Better than an Avata 1 replacement.
@@dronecamps I do stuff seriously wrong with my drones all the time. I feel like they're broke more often than not. You should see the pile of broken CL20 prop guards I have.
I just bought the geprc tinygo model2 v1.3 Cannot get it to bind/run. Followed steps in the limited information included 'manual'. It Does have three flashing lights if that means anything. Red flags three times, green five, and blue seven. Tried to get ahold of the geprc support chat but no answer. Batteries fully charged. Very first done.
Staying subbed as well. There is truth to both sides - and your content provides value with experience/setup information. I am an optimist when it comes to 'reviews' that 99% of people have critical thinking capabilities. Generally one should treat all internet gold/platinum/must buy ratings as subjective like ANYTHING reviewed on the internet. You can never know with 100% confidence that a product isn't being promoted - best to assume it is.
Hello Justin. I bound my ELRS Baby Ape 2 with my ELRS Module, but I do not get any stick input. Could someone help me please? I do not know what to do. Everything seems to be on the right firmware version.
I mean they can shit on ya but I like this format it's more of a "here is the product if you like what you see buy it here" don't need much opinion can be simple like this and if you don't add opinion people can't complain about bias 🤷🏻♂️ but this video is cool good to see DC evolving
Bro for real. I’ve been doing this for 10 years. I’m not going anywhere. I’ve helped millions with 45min build tutorials, Betaflight setups, community pids, repairing peoples quads, and gave away some amazing gear. I will continue to roll this train full steam ahead in my own lane. Which many people love. Haters can kick rocks. This love of RC is lifelong. Camps til death.
Hey man, another great video thanks a lot. You mean a lot to me. You helped me on different occasions. But you should get cool with Botgrinder. I understand you feel offended but I don't believe Bot had any bad intentions towards your person. It's important we stick togheter. The hobby is having a difficult time. Togehter we stand, divided we ...
![☀ Дрон для съемок из металла. Горит или плавится? [GepRC Cinebot25]](http://i.ytimg.com/vi/tMF4zYOns7U/mqdefault.jpg)
![☀ Дрон для съемок из металла. Горит или плавится? [GepRC Cinebot25]](/img/tr.png)
Thank you very much for taking the time to show the beta flight details. Super helpful for someone like me that isn’t very experienced yet with it.
Thank you for the video. I've just get my cinebot25 without vtx and was looking for a tutorial how to disasamble and assemble it back without a pain. This is the only relevant video I found. Pefrect tip to keep 1 screew in o3 unit and secure it to a frame with only 3 screws.
Thank you Justin, well done.
Dude! For a complete noob like me trying to work out what to start with and wth Betaflight does, this video is just sooooo comprehensive! Amazing stuff bud, thanks so so much!
Great video for just about any cinewhoop. Thanks for producing that JD. Happy flying amigo. Cheers 🍻
Thanks 👍
Great tutorial!! I just got this drone, and this video has helped a lot. Quick question: How do you remount the o3 camera onto the silicone balls?? The left side of mine popped loose after my drone went down in a field. Any help is appreciated!
Think those indoor rates will work or be a good starting point on a avata 2?
Is 03 connected via conectors or we have to solder it?
I’m just getting started and this is the quad I’ve been waiting for. Thanks for the review.
Glad I could help
I have a cinebot30 and I do live shows, I really like it because it can withstand the wind. In relation to cinebot25, what do you think during external flights?
Thanks you for the very detailed review and setup. I'm looking at this GepRC drone to make some real estate fly throughs. I already freetyle but I needed a small quad to take some smooth indoor shots. Thanks. 👍👍
Can I bind the O3 with the DJI Goggles v2?
Alright so I’m new at this. Can you assign a switch to have different rates so I could have say lower rates for indoor then flip I switch and the rates go up for raster rolls etc outdoors.
Yes sort of. You can do it inside Betaflight with rate profiles. Then access the menus with your radio sticks inside the goggle screens
I just ordered one of these guy up. Keeping fingers crossed it ships fast from GEPRC. Your discount code basically paid for express shipping of this unit. While I was at it, I picked up a spare frame so I have all parts in case of a disaster. Thanks for showing off this setup as I will be doing the same thing with a zoro
Hey thanks for using my link man! Hope all the info I put out on this quad helps you. I’ll continue more videos for it. I’m glad my code got some good $$$ off for you! 🤙🏼🤙🏼🤙🏼 enjoy it! It’s 🔥🔥🔥
@@dronecamps I have been flying DJI since phantom1. I want to expand my horizons and learn FPV to offer more for clients. This guide is going to help a ton for my initial setup. And yes please show a GPS install on this thing!!
Newbie here. Thanks! Great tutorial. Can everything covered in this video guide be applied to the Cinebot30? Can Rate Profile 2,3,and 4 be set to a 3 way Aux switch?
You can give it a try. It is a completely different power system on this quad, so it may react differently. Just make sure you save it to a different profile and save your original settings on profile 1.
Good review, thanks. You and UAV futures got me hooked ~6 years ago, keep up the good content 😊
Thanks, will do!
Great review Justin! I've been subscribed since my first quad, the legendary Eachine Trashcan. 4 yrs later that thing still rips on 2s. Thanks for everything, brother.
No kidding? Wow man the "Trashcan" funniest quad name ever. And you know what I still have mine. I should find it and fly it. That little guy was so much fun! - Thanks for the kind words. - Justin
Yup. Followed your mod guide and everything. You and Stu were the channels that first introduced me to FPV. Fast forward 5yrs and 50 quads later I'm loving this hobby more than ever. I've never commented on posts but I just thought you should know that brother. Appreciate you, homie @@dronecamps
@teer.6036 thanks again. See you again here sometime!
I finally got my cinebot yesterday and this video helped me get it hooked right up. I also have a Pavo 20 with ridiculously detuned rates for indoor flight. The Pavo sticks are still pretty sensitive. Meaning small stick motions on pitch and roll still move it a lot. The Cinebot needs much larger stick movement. What setting changes this? Ideally I would love something in between.
Expo
@@SerialKoE yes expo for sure but a huge improvement was actually Betaflight 4.5. It behaves a bit differently in angle and horizon. For me it is a good thing.
Weird, I just got mine after I saw your recommendation and the ELRS receiver version I bought the receiver won't fire up with the USB, only with battery. That's a first for me
Same here. For some reason they have attached the receiver to UART4 instead of UART2. I tink UART2 would be a 4v5.
I think they are doing this to make it easier for the customer to solder the HD video receiver to UART1, as UART2 is directly behind it.
I am getting rxloss**** for like half a sec today, lucky everything is fine. I am using Radiomaster Boxer ELRS flying cinebot25s O3 with DJI goggles V2 like your setup.
1. Am I flying too far away? Its about 2 soccer fields with clear LOS.
2. Is lower Packet Rate like 50Hz has better range?
3. Does lower packet rate provide better range but slower response?
4. Does higher TX Power provide better penetration when flying behind obstacles?
5. Approximate how far can I go with your ELRS setting?
Anyone know where I can get a run cam thumb pro mount for this? The normal one that fits around the camera. The bottom part is too thick for the tiny little mount that comes with this drone.
Sincerely curious why comments are disabled in new xhover video.... anyhow... thanks for your efforts....
I’ll check it
Tanks for info vers cool ❤
No problem 😊
Hey Justin, can you tell me where to get your stick ends?
Bestem Aerial if still in business or eBay maybe?
Im a totally noob, and beginner on fpv, just bought a cinebot 30, does this rates profiles apply to the cinebot 30 to?
Give it a try! Make sure to add it to another profile and save your original profile settings
Really great beginner setup overview for the quad. Not quite as friendly a frame as the Bee35Pro (my current daily flyer), but nice looking quad.
It’s different. I’m assuming the prop guards are going to hold up better than the Cinelog series quads. When I hit the bench I thought I had broken the prop guards.
Thanks for the guide. Will the rates work for the Cinebot25 S model?
Possibly you could give it a try. Just make a new Rate profile and save the original one on Rate profile 1.
geprc ftw
Keep up the great content!
Thanks, will do. This was a video I was wanting to make for the community to help everyone.
Have you done a detailed video like this for the Cinelog 25V2
I’ve recently bought a Bind n fly one from GEPRC. One of the props is touching the prop guard/duct.
Not very good for a brand new item to be honest, and gutted that the Cinebot 25 came out just after I purchased the log. ;)
Also, how to go about having more that one quad as this Cinelog is my second Bind n Fly so I need to be able to be going back and forth between the 2.
I’m in the U.K. so can’t really be sending it in to you I doubt
We are doing Zoom classes to help people directly
I have no idea how much it matters, but your sticks should go 1000-2000 in betaflight. Yours seem to go below 1000 and above 2000. You can fix that in your radio's configuration.
Valid comment. Thanks Dorf.
Geprc has been coming out with some great products lately
Yeah they have! 😍
Thanks i like that you explained everything in depth very useful 👍
Glad it was helpful!
Any chance the geprc ef10 is coming up for review?
I don’t have the ef10 but they did send me the Mark4 LR10.
I managed to crack a frame on mine, ran it into a fencepost at maybe 10-15mph and it shattered.
Hey man I don’t want to shame you for the cad but I just want you and botgrinder to make up dude there doesn’t need to be beef in the hobby- all love ❤
Appreciate that. That would be nice. I like Bot.
@@dronecamps want my advise, don't proceed with the cad shoot him a message and just talk about it man no one needs to be in legal trouble over this its just silly
I'll continue to evangelize that people should use pre-arm. I personally use "Yaw-Trim-Right" for this mode on my Boxer which is easy to use but hard to press accidentally. I nearly got bitten once before I added pre-arm to my quads. I know it's stopped at least one possible accident.
Does anyone know the default value for: Power & Battery --> Amperage Meter --> Scale?
Justin can you post your Betaflight backup file for this. I completely jacked my files somehow trying to get my GPS and remote ID working. I lost everything and somehow corrupted my backups. I messaged GEPRC and have not heard back anything yet. And they do not have the stock setup files on the site. They have the Cinelog but not the Cinebot.
wow, this is a super helpfull and good struckured video. top for beginners and advanced or pro. also to have difrent rates for difrent szenarios is super good. keept it up!
Awesome, thank you!
Great idea in giving rates profiles, set up, and outlining the review. Wish more reviewers would do this and I think you are on to something if you make it a common part of reviews. I see what you are doing here. After all the drama (and I wasn't on your side - on this issue), it seems you took some critiques to heart. You are a knowledgable FPV reviewer and pilot and I have enough grace to stay with you despite my opinion on the recent skirmish.Great review.
This video was made 2-3 weeks ago before any of their pitchfork drama. I’m glad you like the format. 🤙🏼
@@dronecamps Well, I liked it because it was so much more in-depth. Thanks man.
You’re welcome.
I’m human. Sometimes humans get pissed. 😂 my bad.
I bet no one ever got pissed before.
Do you Have vidéo for setup betaflight drone 5 ” freestyle ?? Problème setup m’y drones in elrs
Break one guard, replace all four #fail.
But at least you don't have to remove all the motors like the cl35v2.
Anyone breaks these and they did something seriously wrong. Its 6 bolts to release and replace. I wouldnt call that a fail on Geps part. Better than an Avata 1 replacement.
@@dronecamps I do stuff seriously wrong with my drones all the time. I feel like they're broke more often than not. You should see the pile of broken CL20 prop guards I have.
But I also suck at flying, maybe in a couple years I'll be breaking less stuff.
I just bought the geprc tinygo model2 v1.3 Cannot get it to bind/run. Followed steps in the limited information included 'manual'. It Does have three flashing lights if that means anything. Red flags three times, green five, and blue seven. Tried to get ahold of the geprc support chat but no answer. Batteries fully charged. Very first done.
Staying subbed as well. There is truth to both sides - and your content provides value with experience/setup information. I am an optimist when it comes to 'reviews' that 99% of people have critical thinking capabilities. Generally one should treat all internet gold/platinum/must buy ratings as subjective like ANYTHING reviewed on the internet. You can never know with 100% confidence that a product isn't being promoted - best to assume it is.
Thank you for understanding. 👍🏻
Hello Justin. I bound my ELRS Baby Ape 2 with my ELRS Module, but I do not get any stick input. Could someone help me please? I do not know what to do. Everything seems to be on the right firmware version.
Im staying subscribed i like watching your videos. I enjoy seeing all the new drones coming out makes the hobby interesting.
It’s a good way to see who your real friends are. Now we can really have a good time. No hate. Just flying and fun stuff. ✨🤙🏼
I mean they can shit on ya but I like this format it's more of a "here is the product if you like what you see buy it here" don't need much opinion can be simple like this and if you don't add opinion people can't complain about bias 🤷🏻♂️ but this video is cool good to see DC evolving
Bro for real. I’ve been doing this for 10 years. I’m not going anywhere. I’ve helped millions with 45min build tutorials, Betaflight setups, community pids, repairing peoples quads, and gave away some amazing gear.
I will continue to roll this train full steam ahead in my own lane. Which many people love. Haters can kick rocks. This love of RC is lifelong. Camps til death.
Hey man, another great video thanks a lot. You mean a lot to me. You helped me on different occasions. But you should get cool with Botgrinder. I understand you feel offended but I don't believe Bot had any bad intentions towards your person. It's important we stick togheter. The hobby is having a difficult time. Togehter we stand, divided we ...
It is a hard time. I feel that. Never hated Bot. Just asked him to take my thumbs out of his vid.
I’m dedicated to this hobby.
your legit dude, thanks@@dronecamps
I like your videos and I support you, rather than that tattooed loudmouth.
Appreciate that. I just wanted my shit off his video. That’s all. He didn’t ask to use my artwork.
Bot Grinder is a Grifter...
In before your comment get nuked lol.