Hey Frank, this video helped so much. Thank you. If you were me and already have a cinebot30 with naked gopro11, would you still buy the cinelog25 v2 for indoors? Also, i see you fly in angle mode. Do you also slow your rates down a lot for indoor flights?
I wouldnt buy it at that point as you are going to be above 250g with naked gopro for both anyway. Might as well invest your money in something else You need to play around a bit with angle strength and limit but its a personal preference. I like low rates and a bit higher on the yaw with some throttle expo for real estate
@@FrankFPV Thanks for your advices. Personally, I've been getting started with a DJI Avata for 2 years, and even if it is capable of doing it in Normal mode and supporting a GoPro, I find it "tricky" to fly this heavy machine indoors. When I saw your real estate videos, everything seemed appropriate: the size of the quads, their weight, the naked GP. I just think "I need the same at least". In cases where I absolutely need a sub250, I purchased a Pavo20Pro as a backup drone. I'm waiting to receive them and configure them.
@@parkerhannifin5927 by all means go for it, but you will not really get any advantages or better flight performance with CL25V2 and naked gopro compared to cinebot30 with naked gopro
Looks awesome Frank. Are you filming with the GoPro in LOG mode and using a LUT? I tried the Gopro Flat color and used their LUT but it looks way too saturated.
This is a naked gp 10 so no log, just 5.3k in flat profile, luts only really work when you do collor correction properly. Might as well grade it yourself complelely IMO if it's flat profile
I just sold my Cinelog 25 V2. Prop guards are still fragile and after a light crash they will break. I also had jello with mine that became worse over time. Decided to cut my losses and sell. I also had the same issues with my Cinelog 20 V1. I am going to steer clear of Geprc from here on, to many other good choices.
It depends what mount you use on the naked 11. As mentioned in this video I used the mount from the Pavo25V2 and put that on the CL25v2 so I can still use the better M5 mounting options
Hi Frank and thank you for all your contents. I just received this Cinelog25v2 with Naked GP12 from Flywoo. In one of your videos I can see you have 4 types of batteries, so can you advice me the best batteries I have to use ? I need it for indoor project like you. Thank a lot
Really good video. This model is on my short list as well. However, thinking of going 2" with the YMZFPV Starship X1 as it is a non-pusher design. From my limited research it appears to be a good performer indoors and outdoors. I really don't need GPS (non essential weight) as it is for short range real estate purposes. Thanks for sharing. Curious about location - looks like a beautiful area.
Also a good model! Hard to get your hands on in europe though and I prefer 2.5 over 2'. Can it even carry a naked gopro? I agree on the GPS, however this does give me around 6-7 minutes cruising with just the o3 so sometimes i like to go far and it comes in handy! Video is shot on Crete, Greece!
Nice video! What gopro settings do you use for the indoor to outdoor shots? I always seems to be under or over exposed. Do you use auto shutter or fixed shutter?
Is it possible to get it under 250g with naked gopro any any of those batteries? I considered making the o3 naked but the way it's mounted down low may cause damage.
Interesting! Have you flown the Cinelog20 for the same purpose and in that case, how did you like it? That's what I'm using right now and can't imagine the Cinelog25 V2 would be a huge difference?
.5 inches difference in prop size is a huge difference, between being able to carry naked gopro or not, also better in windier conditions. I have flown a 2inch cinewhoop before but for my liking its too small, pavo20pro is a different story
Overall it flies smoother and easier to control throttle as it is weaker, less wind pushing me around when flying low. I think the pavo25v2 is more efficient, and has much more power but exclusively for indoor real estate you don't want that
I didn't do any mods, i just cut the o3 protection tpu print i received with my axisflying cineon c25 so it could fit the cl25 as well. It does not allow you to use nd filters but i rarely use those on o3 anyway and i feel like this protects the vtx better than a UV filter
Hi Frank, I have been undecided about choosing a cinewhoop to start with indoor projects, I have noticed that the cinelog25 v2 is the best alternative but I am worried about its durability, the cinebot25 has recently been released and I would like to read your opinion on that one, your opinion would help me a lot when making the decision 🙏
Hey mate, thanks for your comment. I got an extra frame kit for the cinelog 25 v2 and did not need to use it yet. I feel like people have very mixed opinions on the cinelog25v2 but if you know how to use it well i think it would be one of the best cinewhoops for real estate. If you need some more power to do mild freestyle as well for example then i recommend the pavo 25 v2. Personally i dont really like the new cinebot 25
![☀ Братишка большого синелога, но смысл тот же. [GepRC Cinelog25 V2 O3]](http://i.ytimg.com/vi/sxW1ygJ9Soc/mqdefault.jpg)
![☀ Братишка большого синелога, но смысл тот же. [GepRC Cinelog25 V2 O3]](/img/tr.png)
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Man keep up the good videos, you have good flight content, you have gotten me interested in cinematic FPV 🎉🎉🎉
Thanks for your comment legend! You made my day!
great video! thanks for sharing your opinion and experience with us👍
Glad you enjoyed it!
Hey Frank, this video helped so much. Thank you. If you were me and already have a cinebot30 with naked gopro11, would you still buy the cinelog25 v2 for indoors? Also, i see you fly in angle mode. Do you also slow your rates down a lot for indoor flights?
I'm interested too because you convince me to start my own with this stuff Frank. Hope that will help me ;) !
I wouldnt buy it at that point as you are going to be above 250g with naked gopro for both anyway. Might as well invest your money in something else
You need to play around a bit with angle strength and limit but its a personal preference. I like low rates and a bit higher on the yaw with some throttle expo for real estate
@@FrankFPV Thanks for your advices. Personally, I've been getting started with a DJI Avata for 2 years, and even if it is capable of doing it in Normal mode and supporting a GoPro, I find it "tricky" to fly this heavy machine indoors.
When I saw your real estate videos, everything seemed appropriate: the size of the quads, their weight, the naked GP. I just think "I need the same at least".
In cases where I absolutely need a sub250, I purchased a Pavo20Pro as a backup drone.
I'm waiting to receive them and configure them.
@@parkerhannifin5927 by all means go for it, but you will not really get any advantages or better flight performance with CL25V2 and naked gopro compared to cinebot30 with naked gopro
Looks awesome Frank. Are you filming with the GoPro in LOG mode and using a LUT? I tried the Gopro Flat color and used their LUT but it looks way too saturated.
This is a naked gp 10 so no log, just 5.3k in flat profile, luts only really work when you do collor correction properly. Might as well grade it yourself complelely IMO if it's flat profile
I think I messed my PID tune up could you share a picture of yours for this drone?
I just sold my Cinelog 25 V2. Prop guards are still fragile and after a light crash they will break. I also had jello with mine that became worse over time. Decided to cut my losses and sell. I also had the same issues with my Cinelog 20 V1. I am going to steer clear of Geprc from here on, to many other good choices.
I have moved on to a different main real estate drone as well! I had no issues with it but it was just not powerfull enough in windy conditions
Does the hero 11 naked work with the cinelog v2? I saw it only had a hero 8 base
It depends what mount you use on the naked 11. As mentioned in this video I used the mount from the Pavo25V2 and put that on the CL25v2 so I can still use the better M5 mounting options
You just earn a new sub!! Thanks for clarifying the tbs antenna.. I'm thinking of getting the analog version with tbs.. how far it can go..
Yes idk if its just me but the minimortal t antennas suck and they come with most smaller sized BNF's 💩
Hi Frank and thank you for all your contents. I just received this Cinelog25v2 with Naked GP12 from Flywoo.
In one of your videos I can see you have 4 types of batteries, so can you advice me the best batteries I have to use ? I need it for indoor project like you.
Thank a lot
I recommend trying all sizes as it really depends on your own style, i like 750-850mah the most
Really good video. This model is on my short list as well. However, thinking of going 2" with the YMZFPV Starship X1 as it is a non-pusher design. From my limited research it appears to be a good performer indoors and outdoors. I really don't need GPS (non essential weight) as it is for short range real estate purposes. Thanks for sharing. Curious about location - looks like a beautiful area.
Also a good model! Hard to get your hands on in europe though and I prefer 2.5 over 2'. Can it even carry a naked gopro? I agree on the GPS, however this does give me around 6-7 minutes cruising with just the o3 so sometimes i like to go far and it comes in handy! Video is shot on Crete, Greece!
Great video, better than ones you used before like Axis Cineon ? I ask because I need one for indoor projects. Thank
I think this one is the best for indoor projects, better than the CineOn C25!
@@FrankFPV Thanks a lot Frank
Hi do you use acro or angle mode when flying through real estate
A little bit of both, when i'm flying exclusively indoors I use mostly angle mode though.
Nice video! What gopro settings do you use for the indoor to outdoor shots? I always seems to be under or over exposed. Do you use auto shutter or fixed shutter?
Sent you a DM on IG!
Is it possible to get it under 250g with naked gopro any any of those batteries? I considered making the o3 naked but the way it's mounted down low may cause damage.
I haven't tried yet, maybe with a very small lipo and ultra naked o3 it might be achievable but you will be left with a not so durable kwad
@@FrankFPV My thoughts too. I decided I'll buy a QAV 2.5 frame kit and try to build one.
@@stellarmediacollective7953 let me know how it goes!
Interesting! Have you flown the Cinelog20 for the same purpose and in that case, how did you like it? That's what I'm using right now and can't imagine the Cinelog25 V2 would be a huge difference?
.5 inches difference in prop size is a huge difference, between being able to carry naked gopro or not, also better in windier conditions. I have flown a 2inch cinewhoop before but for my liking its too small, pavo20pro is a different story
I´m sorry I would to understand better your opinion, why is it better than pavo25v2 for indoor ?
Overall it flies smoother and easier to control throttle as it is weaker, less wind pushing me around when flying low. I think the pavo25v2 is more efficient, and has much more power but exclusively for indoor real estate you don't want that
@ oh I see, nice, thank you very much for the reply Frank😁 cheers from Portugal
did you use a ND filter? Awesome work bro
I had a ND 16 on the naked GoPro for the real estate project yes!
Hello, do you have the stl of the gps?
I don't sorry
What mod did you do to the O3 mount? I have the CL25 and hate the stock o3 mount
I didn't do any mods, i just cut the o3 protection tpu print i received with my axisflying cineon c25 so it could fit the cl25 as well. It does not allow you to use nd filters but i rarely use those on o3 anyway and i feel like this protects the vtx better than a UV filter
What 3-blade propellers do you use?
Gemfan d63!
Hi Frank, I have been undecided about choosing a cinewhoop to start with indoor projects, I have noticed that the cinelog25 v2 is the best alternative but I am worried about its durability, the cinebot25 has recently been released and I would like to read your opinion on that one, your opinion would help me a lot when making the decision 🙏
Hey mate, thanks for your comment. I got an extra frame kit for the cinelog 25 v2 and did not need to use it yet. I feel like people have very mixed opinions on the cinelog25v2 but if you know how to use it well i think it would be one of the best cinewhoops for real estate. If you need some more power to do mild freestyle as well for example then i recommend the pavo 25 v2. Personally i dont really like the new cinebot 25
thanks Frank, keep up the good content, you deserve more views 👍
@@camilosilva2648 I'm already so grateful for the views i have been getting lately! Love to bring you guys along my journey 🙌
How would it do with a DJI Action 2?
Good question, I never tried! Personally i think the pavo 25 v2 has more thrust and suits the action 2 better
@@FrankFPV i looked at it, but it is sold out😔 im also gonna need a cinewhoop very soon for school and for after i get my part 107
@@jon_espi10 Cinelog25v2 will probably do good with action 2 but outside in winds it will start to struggle and flying might be a bit more difficult
Which rates do you use?
I use the default rates and tune, only 0.5 throttle expo!
Why a cinelog? I was under the impression the cinebot was the superior drone.
Yes but it's a different category IMO. Much heavier. Also I would prefer the CL35 or pavo35 over cinebot
Fpv drone gift me please 🥺