Today I will be reviewing @lincolnelectrictv New Frontier 400x Pipe Check Out Vevor Inspection Endoscope: amzn.to/3XeklUG #lincolnelectric #welder #welding
went with the 400pro over this, glad i did.. it stacks! im a big lincoln fan but my 400 pro has impressed me especially downhill and 7018 roll outs. i dont need a big touch screen with smart settings, might be more user friendly for beginners but if your coughing up 18k for this machine you should already know how to run beads and make money
Bruh, love seein' the new welder! I'm still rockin' the SA-200 and prolly neva rate to deserve a Maxed-out machine like this. Still, I like seeing what's out there! You're my favorite welding channel would be cool to see more content, but stay gold. Do your family right. I want to see you recover well enough to get a choice rig to put this on when the time is right. Peace!
@@mikecubes1642i had a miller trailblaze 302 ,, and adter 15 years of work wuth me i replaced it for the new 325 ,but buuuut... i use the 325 just when i go out,, cause like u see there s too much electrical and computer stuff on this machines,, i wish they could make a machine full of knobs insted of screems and computer things😂😂😂
@@Rhino5.0 so far ,, really good man,, one thing i really liked about this machine is u can adjust the dig on the welding,, that is a plus man,, the damn weldings comes up really nice ,, most of my job is with rod ,, but i tryed the suit case,, mig ,tig and no complains at all ,, actually is kinda bit more quit than my other one .. the remote,, i love working with that thing,, u dont have climb down or up to increase o decrease power
Looks pretty high tech. But my question is, does Lincoln really expect for this machine to withstand the elements. It being outside all the time in Texas and New Mexico. I would think that screen would fry lol. But I did like the auto off/start thing
I thought the same too. It's nice to have something so fancy but reliability and costs to fix any problems would be my concern. I might still prefer the miller pipe pro 400.
ive ran a 330mpx over a -40 northern canada winter and the screen does seem to hold up, i did pick the 400pro over this though because i just prefer knobs
Should be sweet to try and use in an ice storm!!! First thing I would do is make some sort of accessible cover for the face of that thing to keep the mud, ice, etc.... off the screen and controls. Tech is nice when it works out. But damn am I scared of failure on a job site!!!
How are you liking the arc for putting in a bead-hot -fill-an cap .I currently using a sa -200 black face an lookin to purchase a new new Lincoln Diesel engine drive,I would appreciate a reply thanks an congratulations on your new diesel machine 👍
Miller killer? 😆 'll a big Miller fan. First portable I've seen with a screen but I assed it was coming. Lincoln does some great stuff too. Hope it does good for you and good luck.
Running vantage 400 bought new in 2014. Looking at this machine now. 400 pipe pro not a fan of, to complicated for oilfield, does weld good though. Any guys out there thinking 18k is expensive when your making 250k a year easily justified.
Thing is sick af definitely something to have if you pipelining but for me that’s a big pass 20k I’m buying a trailer blazer and a down payment on a truck and making a rig
No doubt!! Most of us know that these large companies are trying to max out profits .... so they program these boards to fail. I understand things are changing and most changes aren't for the better. I still prefer transformer tech.
These digital displays are not new and not made by Lincoln or Miller. These displays have been used for years on things like rock crushers and screeners. Logging equipment and refuse trucks. There are proven in way harsher conditions that anyone would ever have a welder in.
Yo Rico post more videos g 👌🏽 always fun to watch your videos!!
went with the 400pro over this, glad i did.. it stacks! im a big lincoln fan but my 400 pro has impressed me especially downhill and 7018 roll outs. i dont need a big touch screen with smart settings, might be more user friendly for beginners but if your coughing up 18k for this machine you should already know how to run beads and make money
So your saying if you don’t know how to run beads and make money get the 400pro
@@Rhino5.0 didnt suggest that at all...
My guy! Congrats on the new machine! Big boy shit 💰👨🏾🏭🤙🏿💯
I love my Miller pipe pro 400 .
Looks good! 👌🏼
That thing is a beauty!
Bruh, love seein' the new welder! I'm still rockin' the SA-200 and prolly neva rate to deserve a Maxed-out machine like this. Still, I like seeing what's out there! You're my favorite welding channel would be cool to see more content, but stay gold. Do your family right. I want to see you recover well enough to get a choice rig to put this on when the time is right. Peace!
you would like the new machine until it has problems with the computer BS inside it
@@mikecubes1642i had a miller trailblaze 302 ,, and adter 15 years of work wuth me i replaced it for the new 325 ,but buuuut... i use the 325 just when i go out,, cause like u see there s too much electrical and computer stuff on this machines,, i wish they could make a machine full of knobs insted of screems and computer things😂😂😂
@@anguianosboymiller 325 trailblazer? The newest one? How you liking it?
@@Rhino5.0 so far ,, really good man,, one thing i really liked about this machine is u can adjust the dig on the welding,, that is a plus man,, the damn weldings comes up really nice ,, most of my job is with rod ,, but i tryed the suit case,, mig ,tig and no complains at all ,, actually is kinda bit more quit than my other one .. the remote,, i love working with that thing,, u dont have climb down or up to increase o decrease power
Looks pretty high tech. But my question is, does Lincoln really expect for this machine to withstand the elements. It being outside all the time in Texas and New Mexico. I would think that screen would fry lol. But I did like the auto off/start thing
I live in Quebec Canada. Last winter at -50c the screen was just as fluid as a warm summer day
I thought the same too. It's nice to have something so fancy but reliability and costs to fix any problems would be my concern. I might still prefer the miller pipe pro 400.
@@davidste-marie1501 yea it did good in the cold. But how is it gonna do down here in the desert heat. Not to mention arizona
ive ran a 330mpx over a -40 northern canada winter and the screen does seem to hold up, i did pick the 400pro over this though because i just prefer knobs
I have one. I live in south Texas.
That auto start sounds bad ass
Run 7018 on SMAW. It runs smoother than it does on pipe mode. Machine is a beast. I use pipe mode for downhill.
Love it! Only thing I’d be worried about is that touch screen being outside. Best of luck brother.
run a few SA200's and 300's,Nice machines.I've got 576hrs on my PipePro and loving how it runs
Nice unit
Should be sweet to try and use in an ice storm!!! First thing I would do is make some sort of accessible cover for the face of that thing to keep the mud, ice, etc.... off the screen and controls. Tech is nice when it works out. But damn am I scared of failure on a job site!!!
I didnt see the facebook or twitter setting on that dial.
can you adjust the arc as good as an SA-200?
Do you have an update on the machine after a few months of use? Any issues?
Return expenses. What does it do better than a cheaper machine? The on off is pretty cool though
How are you liking the arc for putting in a bead-hot -fill-an cap .I currently using a sa -200 black face an lookin to purchase a new new Lincoln Diesel engine drive,I would appreciate a reply thanks an congratulations on your new diesel machine 👍
nice machine
Miller killer? 😆 'll a big Miller fan. First portable I've seen with a screen but I assed it was coming. Lincoln does some great stuff too. Hope it does good for you and good luck.
Running vantage 400 bought new in 2014. Looking at this machine now. 400 pipe pro not a fan of, to complicated for oilfield, does weld good though. Any guys out there thinking 18k is expensive when your making 250k a year easily justified.
I just drove 2 hrs to pay 18k for a spotless PipePro 400,I love it so far,it runs dualshield better than my 9-5 machine a Lincoln 360MP-
Thing is sick af definitely something to have if you pipelining but for me that’s a big pass 20k I’m buying a trailer blazer and a down payment on a truck and making a rig
Looks expensive when it breaks.. gives me anxiety thinking about how much that board will cost right when it's out of warranty lol
There a guy that did a video on what your talking about it's good information
No doubt!! Most of us know that these large companies are trying to max out profits .... so they program these boards to fail. I understand things are changing and most changes aren't for the better. I still prefer transformer tech.
Very nice indeed! 18k.. whew! Thats a lot..
My PP400 with a Cat only has a 12 gallon tank, Lincoln has it going on.
How’s the machine running so far
I think I went to school with him in mainliners welding academy
What is up with that pipe @ .48?
Wow
Lincoln needs to add a cover for that for screen lol gonna get messed up quick
Only $18K!? where did you find that deal? lowest I've found is around 21k
Anybody bought a Maverick 325x ?
Is the Lincoln a paid advertisement or was this bought, also an update on the truck situation!
These digital displays are not new and not made by Lincoln or Miller. These displays have been used for years on things like rock crushers and screeners. Logging equipment and refuse trucks. There are proven in way harsher conditions that anyone would ever have a welder in.
Diesels cheap in Texas
Need 6 month review
Stick with the old ones