Ultimate Guide: How to Clean Your NTools 4000B HVLP Spray Gun Like a Pro!

In this video, I will show you how to properly clean the NTools 4000B spray gun before you start using it. This comprehensive guide covers every step you need to know, including how to disassemble the spray gun, thoroughly clean all its components, reassemble it, and perform a spray test to ensure everything is working perfectly. Whether you’re a beginner or an experienced painter, this detailed tutorial will help you maintain your spray gun for optimal performance and longevity. Don’t miss out on these essential tips and tricks for keeping your spray gun in top condition!
How can you tell if you've cleaned it correctly? Check out this video: • How to Identify Poor S...
Thinking of buying this spray gun? Consider using my affiliate link: shorturl.at/lhoKq
Paint spray gun review, spray gun cleaning, aliexpress spray gun, NTools 4000 B, 4000B, HVLP, DIY, garage hobby, compressor, paint, clear coat, base coat, primer, sealer, cheap paint spray gun, chinease spray gun, better than Aeropro R500?
All my videos are made for entertainment only The views expressed are my own, and should you choose to follow them, you do so at your own risk Products, materials, machines and machinery used can be hazardous if used inappropriately, for your safety all will have instructions on there safe use either by contacting the manufacturer, viewing on manufacturers web sites, viewing there operating instructions or via technical data sheets ensuring you are familiar with all this information will help with safe use of equipment and products
Your local health and safety executive with help with information for the safe use and disposal of materials in accordance with your local environmental health regulations Thanks for watching

[@marcuslima2535]

how do you make sure inside your gun is dry to use? the thinner couldn`t stick on the bottom of the gun on the regulator/air exit? or that place is closed?

[@happyspraygun]

After using the thinner, blow air through the gun. Connect it to an air compressor and pull the trigger to let air flow through the gun for a minute or two. This helps remove any remaining thinner, ensuring that the internal parts, including the regulator and air passages, are dry.

[@dlmm2645]

How much liter/minute or CFM does this spraygun use. Some shops say 4Cfm, but that is really low?

[@happyspraygun]

It’s actually around 12 CFM. It’s using a lot of CFM, but it sprays really well.