Like you said, it’s a small test but a really important one. Thanks for explaining what you need to look for in the visual inspection and the importance and reasoning behind carrying out a tightness test when doing a positive pressure test. “Negative pushes the products out, positive sucks the air in”. I won’t forget this hopefully. Thanks Derek 👍🏻 Asian Jon. Training.
Spent the past 3 days on your channel revising for my summative exam and passed today! next step ACS. Great channel with Great examples and explanations.Thank you!
Very well done. There were a lot of Positive pressure Potterton Profiles fitted in Ireland good few years ago . Some are still going strong. I find one of greatest dangers in aging pp boiler is leaking pump and or pump valves located directly on top of the boiler causing catastrophic corrosion which is why these appliances should definitely be checked annually.👍
When I do the flue flow test and spillage I go through some parts of chimneys. I am just putting a video together about flues but it will take a long time to make as I am splitting it up between types a, b and c systems.
When using yer hands lick yer palms you'll feel the draft a lot easier. Or get a smoke generator. Told that last acs or long match. And mind wipe casing down or will leave sooty mark round case🤣🤣
![BETA SQUAD vs AMP FOOTBALL MATCH [OFFICIAL STREAM]](http://i.ytimg.com/vi/ChEmvP52p0U/mqdefault.jpg)
My name is Mr Ratman, a service and repair steam boiler in Indonesia. success is always for you.
Another good video Derek! Thanks!
Thank you Derek , Mohamed Hassan
Like you said, it’s a small test but a really important one. Thanks for explaining what you need to look for in the visual inspection and the importance and reasoning behind carrying out a tightness test when doing a positive pressure test.
“Negative pushes the products out, positive sucks the air in”. I won’t forget this hopefully. Thanks Derek 👍🏻
Asian Jon. Training.
Correct mate glad to see you are back 😜
Spent the past 3 days on your channel revising for my summative exam and passed today! next step ACS. Great channel with Great examples and explanations.Thank you!
Thanks for watching cheers and good luck with your ACS 👍🏻
Great video Derek. Great tutorial videos. Very informative and easy to understand. Thank you!
Very professional! Your explanations are the best 💐👍
Always very good with all of his video. Shows dedication explaining as simple as always.Thank you
Love the blowlamp suggestion not heard that one before
Excellent video, very useful information as usual. Thank you. 👍👍👍👍👍
Just watched it. Nice one Derek 👍
Thomas Bradwell
Thanks Derek.
Thanks Derek great video 👍👍
Gracias por los consejos!!!
Fantastic derek.
Also your accent is the best
Derek, I was waiting for that boiler to burst into flames as you left the blow torch on and placed it next to the boiler..😅😅😅😅
Very well done. There were a lot of Positive pressure Potterton Profiles fitted in Ireland good few years ago . Some are still going strong. I find one of greatest dangers in aging pp boiler is leaking pump and or pump valves located directly on top of the boiler causing catastrophic corrosion which is why these appliances should definitely be checked annually.👍
Excellent as usual
Well explained thanks
Great video👍👍👍
Always helpful 👍👍
Great Video 👍👍👍
It’s amazing video 👍
All good stuff Derek cheers…
Many Thanks
It's mental to think that boilers used to be positive pressure! Camilo Alcapia
You are the best mate, l like your video !
Great stuff👍🏼
Thanks Derek, Ricky
Thank you, Nikola Ditsov
Nice video again
Keep up the good work! 👍👍👏👆
always like before I even watch it, never disappoints and always packed with so much info
Great video Derek. It was good revision on the subject. Thank you. Polish Peter - trainee at TomKat😀👍
Excellent 👍
Best Video again from Tom Kat...
Yo are sooooo......good Derek
If you do sweep test only than do you have still have to do tightness test as no naked flame.
I love u derek
I use a mirror for leaks it always work,s it just fogs up it easier and don't need flame.
Great video for us trainee gas engineers. Thankyou
I've looked through all your videos but cant find anything on chimneys and shared stacks does this come up in the assessment?
When I do the flue flow test and spillage I go through some parts of chimneys. I am just putting a video together about flues but it will take a long time to make as I am splitting it up between types a, b and c systems.
Dave Thompson. 👍🏻
#1 Fantastic
Use a mirror it will fog up where it is leaking and it is safer.
Great thinking!
Thank you but you have united badge I'm going to get sick
Jordan 👍🏻
👍👍👍
👍 Chris tanker
Is this fan downstream or upstream of the heat exchanger in a positive pressure boiler?
Just think about it is the fan pushing the air in or taking the poc out once you answer that you should be able to answer your own question
@@tomkatgastraining pushing the air in so downstream. We'll explained. Thank-you sir. Love your videos.
👍 Sue Warrington
👍🏾
👍👍
👍🏻
👍
Tomkat👍🏻
👍👍👌👌
Callum Collins - Tomkat Training
Stephen Humphreys
chris Taylor
Matthew burns
Jon-Paul Ward
steve ward
Marcin Masalski
Natnael
Umair safdar
Mike Fahy
Jd training.
When using yer hands lick yer palms you'll feel the draft a lot easier. Or get a smoke generator. Told that last acs or long match. And mind wipe casing down or will leave sooty mark round case🤣🤣
i bet my 15 year old Vaillant torboxmmax is positive presure.
Thank you Derek , Mohamed Hassan
👍👍
👍🏼
👍
👍👍👍👍👍
Umair safdar
👍🏼