Im going to get one to support you in your new venture. Ive stayed away from Brazilian full bridge anps and this will be my first one. Good luck with the new company and you know im going to need Welsh Audio Tshirt and a matching 4 channel!
Full bridge is better below 100hz anyway, International Rectifier (The company who makes the vast majority of components for class D amps) has released various white papers on the subject.
Also can you do a video explaining what kind of electrical you recommend to feed this Jewel I think would be helpful and may save the precious lives of a few of these beauty's!
I know exactly who manufactured the amp and probably the way you got it just wanted to know are you going to offer any larger selections like a 3,5,8 or 12k? Congratulations and I really dig the amp and the clean tastefully done styling and a great price! Keep up the good work we appreciate it!
Do you know Blake Brockhaus who's working at Digital Designs in Oklahoma? He's got access to DD's Audio Precision amp tester. You might try getting ahold of him to see if he will test it for you. You'll get ALL the info with that device.
@@stereomojo I was thinking the same thing. I will need to add a second alternator to keep my truck running for starters. There are no high output models available for my truck. I currently have a SKAR 75.4AB for the front stage and a single RP1200.1 running an Alpine SWX12D4 @2ohms. Those 2 amps alone will shut my truck off at idle pulling 200+ amps of current. Was much worse when I had the RP1200.1 @ ½ohm running two SKAR EVL12D2's in a Gately Audio enclosure tuned at 35Hz. Playing down to 17Hz was the thing to do with that beast, but would kill the power to the PCM and shut down the engine, lol.
@@stereomojo 2002 Mitsubishi Montero XLS. The interior has been fully fortified with SecondSkin Pro sitting on 33x11.50 R18's with Centerline rims. Amazing work truck/SUV/grocery getter/family hauler. Currently at 226k miles.
If you get True Quality OFC wire 4g can support up to 3k if you have short runs like Suv with a battery or lithium bank in the back hatch next to the sub box. Anything over like 6ft run or so then you'll use 1/0 with 4g reducer. The newer generation Full bridge amps are starting to become very efficient. Korean amps are very efficient as well but in order to make power they WANT POWER. most are standard 1/0 or multiple runs of 1/0 being more than 1 terminal head on the amplifier.
@@robcooper3171 @robcooper3171- Full Spec size O.F.C. 4 Ga. Is rated for 150 Amps Maximum. So even if an Amplifier was 90% efficient, & could be provided 14.4 volts, ( while ) a ( 150 Amp load ) was being applied, that Full Spec 4 Ga. Is only rated to handle 1,900 watts R.M.S., in this Example.
I'm lost... I see 1 input jack and 1 output jack.... Can I just run this over to the other amp (other amp has 4 inputs jacks and 2 bridge jacks )... I'm stuck 😅
@@Scandinavian_Pride the WA-2K only requires 1 RCA since it is a 1 channel amp, but you can plug both RCAs into the amp with no issues. If you run 1 to the amp and 1 out of the amp (to another) amp, that will work, but keep in mind that the single RCA going to another amp will only run 1 channel. You can use a splitter, but the fade and balance won’t work correctly.
@@stereomojo I gotcha... I kind of figured that was the way I'd have to do it... So I went to a sound shop at the beach and picked up a crossover (DS18) 3 way and grabbed a sound stream digital bass bass restore processor. I just walked in the house and haven't had a chance to finish the installation... I have been working on the car since sunrise lol... I'm beat Thanks for the reply! Rock on brother! We'll get'r'done tomorrow! Haha
Wow this amplifier looks great . Good job basic little amp , and pushes the true power 🔊🔊🔊🔊💯 💪. Am going to get market place. How much are you going to sale your amps for?
Im about to get one, i have it in my cart. Im just soooo indecisive smh. I have a single alpine type r d2 im going to run at 4ohms. How do u think that would pair up?
Yes, but it could be overkill power wise, depending on how many speakers you put on it. Also, it’s a 1 channel, so the ohm load is important. And there would be no fading or balance.
@@stereomojo yeah cool. I use to go to brown town and see the chickens go. Just a cross the state. I looked for you on Facebook and IG. Different name?
@StereoMoJo- Your Welsh Audio WA-2K is a very good value. Tiffany style RCAs✔, 1 ohm stable on Amp Dyno✔, Does Rated Real R.M.S. Power to clipping✔, Has a metal, phone jack, Bass Knob w/clip light✔, very affordable Price✔, Great person to buy from ✔️
@stereomojo correct. I'm sure other folks have thought about having their own amps made I know I have. Just to have something with your own creativity and name means alot.
I think Audiopipe made a 2k was meant to be a 3k not that exact finish because it's audiopipe. Should be the same board similar features. Marked as a 3k but max power was 2100 to 2400 BigD did a video on it.
@@robcooper3171 yes, exactly. I agree. I may start switching those over to public view starting next weekend. I uploaded them a couple of moths ago, but kept them private. That way I could free up the storage space on my phone. They’re pretty interesting. Thanks!
So I bought one used about a week ago from this young kid from cullman. I figured you installed it for him, but anyway, I am no expert at all so I know I did do something wrong, but I don’t know what, I live in Danville now. So if you could somehow give me your number. I’ll give you a call or video call this Saturday and see if you could tell me how to set up the system.
@stereomojo based on that, you got a good shot man! Have you tried posting on tiktok? Car audio community pretty huge on there. It'll get u alot of eyes on it🤷♂️
Again another say whatever video. What is a Brazilian style amp?? Dude you cant do amp videos if you don’t know what you’re talking about. This amp is a full bridge amp it has NOTHING to do with Brazil. lol!! All the newbies say it and it hilarious.
Congrats man and all the luck to you in your new business. Hopefully you'll be able to expand and bring more to the market. Again, congrats man.
Thanks for the support and encouragement Anthony!
I'd love to see a 5 channel. Not many inexpensive 5 channel out there
That would be cool for sure!
Thats so cool. Saving up to buy it. Great job on the honesty. Worst thing is buying something that does not live up to its ratings!
@@RubenRodriguez-jb1tg thanks Ruben!
@@stereomojo Thank you for what you do. Saving the working guy some money!
@ lol, that’s right! No problem!
Im going to get one to support you in your new venture. Ive stayed away from Brazilian full bridge anps and this will be my first one. Good luck with the new company and you know im going to need Welsh Audio Tshirt and a matching 4 channel!
Full bridge is better below 100hz anyway, International Rectifier (The company who makes the vast majority of components for class D amps) has released various white papers on the subject.
Lol, that’s awesome! Thanks Phil! Shirts and 4 channel amps is a good idea. Ha!
The bass know need to be green to match
@@kc0otv1 that would be cool!
I just bought one and waiting for it..and can't wait to get it I got 4 - 12" power acoustik Gothics wired to 1 ohm I'm so excited to get it!!!! Lol
@@jeffcollins1805 it’s on its way! Thanks Jeff!
Great vids man. Keep up the good work!
Thanks Poppy!
I love those Tiffany style rca inputs. Nice looking amp for sure. I would definitely like to see a 4 channel
@@RomaVilla thanks a bunch! Yeah, I’m happy about the Tiffany RCAs too. I am considering doing a 4 channel
Very nice little amp. Congratulations 👍🏼👍🏼
Thanks Derek!
Congratulations man and I hope you do well
Thanks for the support Brock!
Wow that was the sound of the rain? I love that sound on metal roofs. First thought that was the fan of the amp or converter
@@vcente671 lol! Yes, it was raining on my metal roof during the video. I was too excited and impatient to wait on another day. lol
Also can you do a video explaining what kind of electrical you recommend to feed this Jewel I think would be helpful and may save the precious lives of a few of these beauty's!
@@BrianDoughboyLynch good idea, thanks!
I know exactly who manufactured the amp and probably the way you got it just wanted to know are you going to offer any larger selections like a 3,5,8 or 12k? Congratulations and I really dig the amp and the clean tastefully done styling and a great price! Keep up the good work we appreciate it!
@@BrianDoughboyLynch thanks Brian! Yes, it’s no big secret. Be sure to pay attention to my channel over the next few days. Thanks again!
Yes sir! I would like to see those other testing videos!
Do you know Blake Brockhaus who's working at Digital Designs in Oklahoma? He's got access to DD's Audio Precision amp tester. You might try getting ahold of him to see if he will test it for you. You'll get ALL the info with that device.
No, I don’t know him, but that would be cool!
The square style transformers in those Brazilian amps is the big difference
I have one of your amplifiers in my cart right now. What are your thoughts on running it on a SKAR VXF 15D2? Thanks brother.
That’s awesome! That would actually be a really good match-up! If you get it, just wire it to 1 ohm and stay out of clipping.
@@stereomojo I was thinking the same thing. I will need to add a second alternator to keep my truck running for starters. There are no high output models available for my truck. I currently have a SKAR 75.4AB for the front stage and a single RP1200.1 running an Alpine SWX12D4 @2ohms. Those 2 amps alone will shut my truck off at idle pulling 200+ amps of current. Was much worse when I had the RP1200.1 @ ½ohm running two SKAR EVL12D2's in a Gately Audio enclosure tuned at 35Hz. Playing down to 17Hz was the thing to do with that beast, but would kill the power to the PCM and shut down the engine, lol.
@@DustmanDiagnostics oh wow! What kind of truck do you have?
@@stereomojo 2002 Mitsubishi Montero XLS. The interior has been fully fortified with SecondSkin Pro sitting on 33x11.50 R18's with Centerline rims. Amazing work truck/SUV/grocery getter/family hauler. Currently at 226k miles.
@@DustmanDiagnostics cool! That’s about the right size cabin to get loud in.
looks very nice, but why do full bridge amps of this size always come with 4 gauge instead of 0? big price difference?
If you get True Quality OFC wire 4g can support up to 3k if you have short runs like Suv with a battery or lithium bank in the back hatch next to the sub box. Anything over like 6ft run or so then you'll use 1/0 with 4g reducer.
The newer generation Full bridge amps are starting to become very efficient.
Korean amps are very efficient as well but in order to make power they WANT POWER. most are standard 1/0 or multiple runs of 1/0 being more than 1 terminal head on the amplifier.
@edwinhoward6530- I'm sure there is a big price difference between the 4 Ga. & 0 Ga. Amplifier Power & Ground inputs.
@@robcooper3171 @robcooper3171- Full Spec size O.F.C. 4 Ga. Is rated for 150 Amps Maximum. So even if an Amplifier was 90% efficient, & could be provided 14.4 volts, ( while ) a ( 150 Amp load ) was being applied, that Full Spec 4 Ga. Is only rated to handle 1,900 watts R.M.S., in this Example.
Same power and very similar to the Sundown Audio SFB-3000D. I am gonna have to get one of these Welsh 2k.
That’s awesome! They happen to be on sale right now!
And a good price will sell . With the right people pushing and running it right
I think you’re right!
Mine is up and running at 1 ohm, hits harder than the Taramps 1800.1 I was running.
Thanks Ronald!
I'm lost... I see 1 input jack and 1 output jack.... Can I just run this over to the other amp (other amp has 4 inputs jacks and 2 bridge jacks )... I'm stuck 😅
@@Scandinavian_Pride the WA-2K only requires 1 RCA since it is a 1 channel amp, but you can plug both RCAs into the amp with no issues. If you run 1 to the amp and 1 out of the amp (to another) amp, that will work, but keep in mind that the single RCA going to another amp will only run 1 channel. You can use a splitter, but the fade and balance won’t work correctly.
@@stereomojo I gotcha... I kind of figured that was the way I'd have to do it... So I went to a sound shop at the beach and picked up a crossover (DS18) 3 way and grabbed a sound stream digital bass bass restore processor. I just walked in the house and haven't had a chance to finish the installation... I have been working on the car since sunrise lol... I'm beat
Thanks for the reply! Rock on brother! We'll get'r'done tomorrow! Haha
@@Scandinavian_Pride ok cool. Keep us posted
yes, lets see those vids of the testing
Thanks John! Stay tuned for the start of those this coming Sunday morning!
Yes post test videos of China amps
Huh?
I see you’re getting started with your Welsh full bridge line amps; do you have any in the 1K size?#🔊❤️
I don’t, but maybe I can offer other sizes in the future.
Thanks!#🔊❤️@@stereomojo
Wow this amplifier looks great . Good job basic little amp , and pushes the true power 🔊🔊🔊🔊💯 💪. Am going to get market place. How much are you going to sale your amps for?
Thanks Ruben! They’re $180 on ebay and $150 on marketplace for a local meetup.
So is this from a Alibaba company?
💯%
Looks like a guitar amp inside. Pretty cool. Lets all come together and build a wall of sound..
lol, thanks
Do they have 4 Channel
Yes, if things go well, I’d like to offer a 4 channel as well. Thanks!
so when are these going to be available?
They’re available now. The link is in the description. I should’ve said that in the video.
Im about to get one, i have it in my cart. Im just soooo indecisive smh. I have a single alpine type r d2 im going to run at 4ohms. How do u think that would pair up?
Yes, especially wiring it to 4 ohms, that’s smart. Then you’ve got plenty of power available if you need it in the future.
@stereomojo Thank you for the reply. You got my sale! 👍 best of luck.
@@EvOLuT1oN that’s awesome! Thanks a bunch!
Hey Evo, if you want to send me an email to stereomojo@yahoo.com I think I can save you some money on a WA-2K
Please show us some dynamic testing! 😁
That’s a good idea. I may do that soon. Thanks!
Where can I get one of those amp from
@@charleswilliams2556 eBay. You wouldn’t happen to live in north Alabama would you?
@@charleswilliams2556 the eBay link is in the description
@@stereomojo I’m live in Pensacola FL
@@charleswilliams2556 ok. Shoot me an email if you’re still interested in getting one
I might need a pair of those for my new build in a few months...
Sweet! What kind of build are you looking to do?
@@stereomojo I'm considering a pair of Slapz Audio neo 15s in an infinite baffle setup ☺️
@@BlueTegu360 Nice! That should be loud!
@@stereomojo Hopefully, I'm undecided as of yet.
But Slapz are the only budget brand with T/S parameters good for Infinite Baffle.
Can I use this amp as a mid-range amplifier?
Yes, but it could be overkill power wise, depending on how many speakers you put on it. Also, it’s a 1 channel, so the ohm load is important. And there would be no fading or balance.
Nice I like your amplifier.
Thanks Ryan!
Damn I live in North Alabama too West Alabama I'd like to get up with you maybe sometime
That’s cool! Are you over around Hamilton or Muscle Shoals or something?
@@stereomojo I am from Hamilton and live in winfield now. You?
@@brockmarquis8511 aw man, that’s cool! I live in Holly Pond, in Cullman County.
@@stereomojo yeah cool. I use to go to brown town and see the chickens go. Just a cross the state. I looked for you on Facebook and IG. Different name?
@StereoMoJo- Your Welsh Audio WA-2K is a very good value. Tiffany style RCAs✔, 1 ohm stable on Amp Dyno✔, Does Rated Real R.M.S. Power to clipping✔, Has a metal, phone jack, Bass Knob w/clip light✔, very affordable Price✔, Great person to buy from ✔️
@@evilinside5984 I couldn’t agree more! lol. Yeah, I think if more people knew about it they would sell much faster. Thanks for the nice words!
Good job bro
Thanks Jerrold!
Most certainly post those up buddy so all of us can see what you were seeing.
You’re talking about the other samples right?
@stereomojo correct. I'm sure other folks have thought about having their own amps made I know I have. Just to have something with your own creativity and name means alot.
I think Audiopipe made a 2k was meant to be a 3k not that exact finish because it's audiopipe. Should be the same board similar features. Marked as a 3k but max power was 2100 to 2400 BigD did a video on it.
@@robcooper3171 yes, exactly. I agree. I may start switching those over to public view starting next weekend. I uploaded them a couple of moths ago, but kept them private. That way I could free up the storage space on my phone. They’re pretty interesting. Thanks!
@@robcooper3171 I’ll check it out. Thanks
Man i want 1 💯 true power
Ruben, I’m in North Alabama. Where do you live?
Dang I am in Fresno CA. But I'm going to do my best to try to get one on eBay hard times. But thanks again for a great video 💯😎
@@rubenflores2870 no problem. Thank you!
So I bought one used about a week ago from this young kid from cullman. I figured you installed it for him, but anyway, I am no expert at all so I know I did do something wrong, but I don’t know what, I live in Danville now. So if you could somehow give me your number. I’ll give you a call or video call this Saturday and see if you could tell me how to set up the system.
Ok, shoot me an email to stereomojo@yahoo.com
👍👀👍
The name is a tad confusing.
I thought it was made in Wales.
Yeah, I figured some people might think that. I still wanted to use it anyway.
@stereomojo It is a good name.
Not like it was Cymru ( Welsh for Wales)
All the best from Western Australia.
@@chuckmaddison2924 thanks Chuck!
Top strong gear, sundown, deaf bonce, sound digital, gonzo & etc..........
Let see .5 ohms test
Let’s see 5hem all bro
As long as you can be atleast in same price range as Taramps, they should sell🤷♂️
The new price on eBay is $160 with free shipping. $130 on Marketplace with a meet-up. I hope you’re right!
@stereomojo based on that, you got a good shot man! Have you tried posting on tiktok? Car audio community pretty huge on there. It'll get u alot of eyes on it🤷♂️
Welsh audio 12k sounds good...lol
Ha! That would be cool!
I live in mobile, al.
@@LowetheTechGuy cool! Howdy from Cullman County!
Should let people cash app you and just ship direct.
I can do that
Tiffinany RCA Jacks
Yes, that’s right. Thanks
Looks like a sound digital copy,the lpf is set too high at the minimum it should be 50 not 80,too high.
Drop it to 120 and I am game.
Where are you located?
Again another say whatever video. What is a Brazilian style amp?? Dude you cant do amp videos if you don’t know what you’re talking about. This amp is a full bridge amp it has NOTHING to do with Brazil. lol!! All the newbies say it and it hilarious.
Thanks for your expertise! You’re a great guy!
It’s built NOT tough. What makes you say that?? lol!! This is hilarious but painful at the same time.
Awesome, great comment!