Tamiya Mini 4WD "Wet" Break-In Method for Motors
HTML-код
- Опубликовано: 13 сен 2024
- Watch as I describe two methods ("Dry" v. "Wet") for breaking-in your motors! Here is Ken Harmoni's break-in method: • Tamiya Mini 4WD Motor ...
f you found this video helpful, please donate via Venmo or PayPal @claredin to help support the creation of more videos just like this one.
I Never looked at it as beating other people cause I did that ALL the Time. I had to race myself and keep pushing the boundaries 💯
I'll try this method. Thanks!
Grabbing box stock motors now.
3,000 more rpm! That's pretty significant and well worth the extra time.
I tried this method on box stock motor and my motor stopped working. What did I do wrong? Hahah.
Spray the openings of the motor with electronics cleaner and let it dry. Then try putting a low charge through the motor... 1.5V to start and raise it to 2.0V, then 2.5V, then 3.0V. Do a minute on each. Let it rest. If it runs at 3.0V, then try the water method again. Also see Ken Harmonoi's video via the link.
@@claredin I don’t have that g force so I just followed his video. Love it when you said your box stock got to 26k and my hyper dash sitting at 28k 😂.
@@eugeneevangelista5135 You don't necessarily have to use a G-Force. Any type of power supply that will give you 3.0V off of AC adapter power should also work. The G-Force is just convenient because you can switch to reverse and set a timer on it. Haha... I know... I have some old Atomic Tuned motors that are just 26k, but now they are 31k. You can break-in tuned motors without water and just use voodoo oil and Ganapati oil... but that's a deeper conversation :)
@@claredin I used MadTang break in video before I saw the method you were saying. And yes I agree on that voodoo oil.