Thank you for sharing your ways on breaking in, seems like the Charsoon Antimatter is sold out and or discontinued is there other machine you can suggest?
@@minivictorydonkey sorry sir boob question ulit. Yung gamit niyo sir Yung red Meron ba ganyan nabibili sa glorietta? Gusto ko po sana mag try ulit sana Kaso di ko alam Saan ako mag start haha
Pwede ba sa lahat ng motor yan? Kasi yong tuned motors at stock motors wala yatang carbon brush? Gold thin brush lang yata at kung ganyan ang gagawin baka maputol na agad yong brush.
I only recommend this procedure fo dual shafts and hd3 and powerdash. Each motor has its unique procedure depends on class and category. Giving more effectiveness and performance.
Kuys. May alam po ba kayong alternative or ibang brand na may featute pang break in gaya ng charsoon antimatter mo? Hehe. Been trying to search charsoon antimatter but it's nowhere to find 😅 Thankyou po 😊 more power!
Senpai, Dito din ako sa Japan and gusto ko din po mag build ng open class yung MS Chasis po. Thank you senpai. Saan din makakabili ng tools dito ako bandang nagoya po.
Hi, Depende po, I usually measured from 2k to 5k rpm increase. In my personal xp, the best rpm with torque is from 34k to 38k. The higher the rpm the less torque.
Thank you for sharing your ways on breaking in, seems like the Charsoon Antimatter is sold out and or discontinued is there other machine you can suggest?
good day sir. saan makakabili ng antimatter dito sa pinas or sa shopee po?
Nice tutorial
Salamat ulit sir
Meron po kayong breakin for singleshaft motor?
Hi sir. Question po sa motor. Bawal po ba ultra dash sa bmax? Wala kasi akong nakikita na naka ultra dash na bmax
tutorial po on how to make from at for ms chassis. thanks
Sir, specific ba yang smart charger brand na yan na may “motor break-in” setting o kahit anong smart charger pwede? May smart charger kasi ako e.
How do you install a metal needle tip on WD-40?
BREAK-IN naman po ng battery paano paabutin ng 1.52v fujitsu batts sa SKYRNC2200 charger po thanks in advance po
Ok sir, will upload soon🙂
Pano po break in kapag single shaft motor sir? Do you have a video po ba for that?
Baka naman sir may full details ka ng setup mo nito? Thank you and Best Regards!
Yes sir, just tell me what setup or information you want to know. I will share it
Ano po kahandahan ng na break in na motor bukod sa bumilis?
panu malalaman sir kung subrang ma vibrate ung MDP?
Sir, pwede mo ba ako bigyan Ng tips, bago lng ako mag built bmax, Meron na akong Mach frame at geo glider, set up n lng kulang .
Gusto ko po sana ulit mag start mag tamiya Kaso hindi ko alam kung Saan ulit ako mag umpisa haha
Start sir with fma chassis, since ito ang popular sa bmax. Hindi rin sya expensive
@@minivictorydonkey sorry sir boob question ulit. Yung gamit niyo sir Yung red Meron ba ganyan nabibili sa glorietta? Gusto ko po sana mag try ulit sana Kaso di ko alam Saan ako mag start haha
This method can Can it be used with a torque tuned motor?
It can, but don`t give much effect and good result
Ishikawa po to kuya ah ! Fukui area po ako 😊
Wow, nice sir malapit lang
anu po gamit niug chemical oil?
Hi sir I am wondering how to check the vibration of the motor
Just feel it with your hands while it running, it's easy to tell which one vibrates alot
WD40 for deep cleaning? OK lang ba etong method mo idol across all motor types? salamat. more power to you idol!
Thank you sir for comments
This methods is effective eith hd3 and powrdash, but its fails sometimes with sprints and tuned type motors
Applicable din ba sa LD?
Pwede ba sa lahat ng motor yan? Kasi yong tuned motors at stock motors wala yatang carbon brush? Gold thin brush lang yata at kung ganyan ang gagawin baka maputol na agad yong brush.
I only recommend this procedure fo dual shafts and hd3 and powerdash. Each motor has its unique procedure depends on class and category. Giving more effectiveness and performance.
Kuys. May alam po ba kayong alternative or ibang brand na may featute pang break in gaya ng charsoon antimatter mo? Hehe. Been trying to search charsoon antimatter but it's nowhere to find 😅 Thankyou po 😊 more power!
Thank you sir for asking.
May ibang brand na kagaya ng mismo ng AntiMatter, "Reaktor" at "Thunder" po name nila
@@minivictorydonkey ano po pwedeng alternative sir maliban po sa Thunder, reaktor at antimatter? Halos lahat sold out eh. 😅 hirap po makahanap haha
Good day po. Ask ko lang san nyo na bili ung Antimatter ninyo? Pano po pag walang ganun anong alternative.
Hi sir, try other brand like "Thunder" or "Reaktor"
Same procedure po ba sa Light Dash Dual Shaft?
Hi sir, iba po procedure sa mga tuned type motor at light dash
hello po yung haba pa ring ng build na ito ay 165mm pa rin?
Hi, yes sir. It still passes the required lenght and overall clearances.
Senpai, Dito din ako sa Japan and gusto ko din po mag build ng open class yung MS Chasis po. Thank you senpai. Saan din makakabili ng tools dito ako bandang nagoya po.
try to visit Fukushima Store or anything Mokei Store near you
Only 36k rpm??
Sir anong name ng app yan gamit nyo for rph checker?
Giri: Rpm checker
anong gamit mong cleaner sir? pwede ba yung loctite? or mas ok kung wd40?
Hi sir, Any cleaner will do, don't worry what brand to use. Just don't overdo the cleaning, it may affect the internal quality of the motors
sir mach dash pro is also good for bmax? or hypder dash lang pwede? hehe
MDP is good to use too, medyo malakas nga lang
Hello sir, applicable po ba yung break-in method na ito sa single shaft motor?
I only recommend for HD3 and Powerdash
@@minivictorydonkeyfor single shaft brek in dinamo still same ?
Hello . Recommended oil brekin sir?
Some oil released by Tamiya can be usefull and effective too. Try experimenting also what is available in your place.
@@minivictorydonkey Thanks sir. Good day
San k Japan sir new poh ako mini4wd 2 weeks plng
Toyama sir🙂
sir baguhan lang po pwede po ba makabili sa inyo ng motor yung naka tune na po???
Hi sir, not selling anything yet for now, sorry po😔
anu po gamit niung rpm app?
Giri sir, its free to dowload
sir ask lang . mas okay ba 3.7 kesa sa 3.5 at 4.1 sa bmax setup ?
Although I recommend 3.7:1 for bmax, of course you can change gear ratio depends on track layout
Sagad n b un 34-35k rpm sa machdash
Hi,
Depende po, I usually measured from 2k to 5k rpm increase. In my personal xp, the best rpm with torque is from 34k to 38k. The higher the rpm the less torque.
magkano motor boss
Sorry sir, I dont sell break-in ready motor
So u wasted all that money to find 3 good motors....sad
Yeah, here in Japan good motor can be sold 3000 to 4000 yen each
His money to spend not yours 😂
That's how you get the best motor to use
Yung akin hanggang 20kph lang 😢
That is slow for HD3, try other motor with better rpm🙂
good day sir. saan makakabili ng antimatter dito sa pinas or sa shopee po?
@@JuloRedison Hi sir, wala na pong Anti-Matter na charger, siguro sa mga surplus or racer meron