Halos same settings po pero inconsistent ung akin sa traditional lane change. Mas ok po ba kung lagyan ko spacer front plate para mag down thrust ung front rollers?
Hi sir! Matanong ko lang po yung arrangement ng spacer dun po sa counter gear. Is it counter gear + washer + bearing + bearing roller spacer Or Counter gear + bearing roller spacer + bearing + bearing roller spacer. Thank you po sa pag sagot sir
Hi sir, It`s so nice to know that someone like you is paying attention to the settings. The correct order is "counter gear+bearing+bearing spacer+washer.
sir, for the bonus part. between reinforce plate 13/19mm and rear brake stay, are u sure u use 3mm spacer. its look like 1.5mm. thanks in advance. hope u reply
Hello po. Ilang linggo ko na po pinapanood to for reference. Salamat. Sir ask ko lang po - ano po ung black na nilagya mo sa shaft aa labas ng mags at un pong black sa screw ng mga dampers Salamat po
Hello sir, lagi ko pinapanood mga vid content mo lalo na itong bmax build mo. Interested lang ako dun sa microlon treatment mo. Ano specific type ng microlon gamit mo sir? Nag search kasi ako, marami palang variants ang microlon. I’m looking forward for more of your vid contents.😀 I’m from Calgary AB Canada btw.
Yes sir, since it's stainless steel, it is more stronger and durable when tightening with more pressure than aluminum locknut and also lighter than steel locknut.
Ano kaya problema nang FMA ko, pag lapag parang di kumakagat yung gear tapos ambagal. Sabi nang kaibigan ko yung lalagyan nang propeller shaft sa rear ay parang nag concave na daw kaya parang pag nilapag umaangat na yung propeller shaft
@@ricardo.pedrigosa Good Day din sir, Underguard helps the machine(car) back on track kahit tumama sya sa wall. It also prevents protruding parts like screwheads and rollers from or to be suspended at certain situations.
Hi bro, around 37:45, ask ko lang na talagang medj may friction ang roller pag itry iikot? since need higpitan yung normal nut or else mag lloose siya.
Good day! Ask ko lang if nilakihan mo ba yung butas nung mga screw hole sa rear setting mo using a drill bit o nirekta screw mo lang? Currently using your setup kaso nagkakaproblema kami sa rear setting kasi ayaw tumagos ng mahabang screw, parang may tinatamaan siya tapos hindi ayaw na tumagos, worse, naii-stuck na yung mismong screw dun sa screw hole. Sana mapansin. Thank you!
Hi sir, oo nga, tama po ung sabi nyo. This problem is common almost every chassis. Maybe making a tip video about this matter in the future. Ang ginagawa ko po is gumagamit muna ako ng maiksing screw na may malaking heads para mas madali ikutin gamit ang drivers. Bago ko kinakabit ung permanent screw na mahaba.
@@minivictorydonkey Thanks for the reply! Muntik na kami mag champion dahil sa setup mo, namali lang kami ng choice ng makina, instead of Power Dash, nag Hyper Dash 3 kami dahil natakot kami baka mag course out dahil medyo technical yung layout nung laro, after the race na namin triny yung Power Dash ayun sising sisi kami haha! Sobrang stable manakbo nitong setup mo. Salamat ulit!
Thank you sir for commenting😊 Its an oil based marker, it gives strenght to contacting gears from loosing when dries. More reliable and easy to apply than superglue.
Hi, I unsderstand what you're trying to say here. Thanks for google translation😅. Don't worry about screws to bend whenever machines comes off the track. Chassis is the most important when it comes to damage during impact. This is my challenge for you. Try my front build versus any front build you like. Then let it run and direct hit them to the hard wall. Then see the result for yourself. Screw is nothing important than chassis🫰🙂
hi im trying to copy your build and im new in building B-max what's that black thing called in the tip of your front bumper hope you answer my question thanks 😇
Hi, I am new to BMAX build and I am curious on what is the whole thing you did with the hollow gear shaft. What is the purpose of pushing and pulling the pinions? Thank you.
Question lng sir.. para saan po ung Hg ball bearings na 4 pcs. And 4 pcs na ao 620 bearings? Dba meron na bearings din ung mga rollers? Kaya nagtataka ako pra saan ung 4 na ao bearings?
Hi sir, I checked what Pertua Oil can do and based on appearance, the oil is very thick and the purpose is to fill tiny gaps to engines core to brings back efficiency. Pag inaaply to sa tiny parts like mini4wd bearings, baka lalong hindi na umikot yung bearing.
Question lang sir, may cut po ba sa front yung mach frame mo, para mag fit siya dun sa 3mm na plate? Same kasi tayo ng plate sa harap kaso hindi mag fit yung mach frame ko. Thanks po.
Hello. Quick question for a beginner like me. Why did you have to purchase those shafts when they are already included in the kit? Are they different in length or something?
@@legendary_brigade basically it was made lighter and gears has less contact to chassis giving less friction. Since its a BMax build, modification is limited, strengtening a pinion is the only thing I can do.
hello po sana mapansin pwede po ba ako maka hingi spare parts tamiya po newbie lang po kasi and gusto ko po sana maka alam paunti2x salamat po 🙏 pang Christmas lang po 🎄
![B-MAX Test Run! Mach Frame ON FIRE! [Mini 4wd / ミニ四駆]](http://i.ytimg.com/vi/g3BF-5EDp0o/mqdefault.jpg)
![B-MAX Test Run! Mach Frame ON FIRE! [Mini 4wd / ミニ四駆]](/img/tr.png)
Thanks for sharing bro !! I also using FMA Mach Frame, use blue colour propeller shaft to go faster !!!!
eto gusto build tutorial. hindi tinipid, lason kung lason. eto gayahin ko 99%, 1% kasi hindi ko lang gusto ung red. un lang. Tnx bro for sharing!
astig pa rin talaga🎉
Gustong gusto ko tong kit na to problema ang mahal mahal 😢(fighting korea) kaya ginaya ko na lang isa isa haha
Good afternoon. New subscriber here, im planning to copy this design where will i put my sponge brake
Hi sir, thank you for commenting,
Check my recent upload about brakes. Hope it will helps
ruclips.net/video/-t6o8Lm92D8/видео.htmlsi=WOMaJSbbou8LZ6SB
How about using front sliding damper carbon? Have u ever try building it... and how its run?
ano pong tawag metal thing na nilagay niyo sa yellow gear around 16:41?
can you include what size of screw did you use in everything components?
Nice set up well done🎉🎉
Angas ng build ❤ more power lods.
Beautiful Mach Frame 👍👍👍
Thank you sir.
More power, TMAC Thailand 2023!!!
Hi Sir, very helpful video! can i just check which type of microlon u are using? i saw there are mulitple types in the market. thanks in advance!
I'm using red one
What type of microlon you use? There are many types
Halos same settings po pero inconsistent ung akin sa traditional lane change. Mas ok po ba kung lagyan ko spacer front plate para mag down thrust ung front rollers?
Hi sir!
Matanong ko lang po yung arrangement ng spacer dun po sa counter gear.
Is it counter gear + washer + bearing + bearing roller spacer
Or
Counter gear + bearing roller spacer + bearing + bearing roller spacer.
Thank you po sa pag sagot sir
Hi sir, It`s so nice to know that someone like you is paying attention to the settings.
The correct order is "counter gear+bearing+bearing spacer+washer.
17:17 the free is Good😮😮 them master
Can this setting i used small 24mm diameter tyre ?
Your store is still open?and where is your location?
Sir good day po yung microlon ba na ginagamit mu is yung pang sasakyan yung treatment para sa transmision?
Can you try to build a suit from an SFM chassis?
Sir hello! Tanong ko lang po paano po iinstall yung wheels na maging equal yung nakaprotrude na shaft? Thanks po newbie here.
sir, for the bonus part. between reinforce plate 13/19mm and rear brake stay, are u sure u use 3mm spacer. its look like 1.5mm. thanks in advance. hope u reply
notice me sir
hi sir, sorry for the late reply. Yeah, it's a 1.5mm aluminum spacer
Hello po. Ilang linggo ko na po pinapanood to for reference. Salamat.
Sir ask ko lang po - ano po ung black na nilagya mo sa shaft aa labas ng mags at un pong black sa screw ng mga dampers
Salamat po
hi sir, thank you for commenting. It's a rubber pipes
Hello sir, lagi ko pinapanood mga vid content mo lalo na itong bmax build mo.
Interested lang ako dun sa microlon treatment mo. Ano specific type ng microlon gamit mo sir? Nag search kasi ako, marami palang variants ang microlon.
I’m looking forward for more of your vid contents.😀 I’m from Calgary AB Canada btw.
Hi sir, thank you po. I am using Microlon with the red packaging, it has two variants, a 236ml or 473ml
Microlon is a brand sir what type of chemicals did you use? because there's a lot of variants of microlon.
Yes, im using the one that has red packaging. Havent tried yet, rest variant may have better result depends on its grade and use
No ma แซสซี for ma guild bmax🏎🏎🏎🏎
Hello, ano yung gamit mong pang-cover nung excess shaft for the wheels? Thanks!
It called "rubber pipes"
ano pong pwedeng alternative ng HG carbon rear stay na FRP plate po?
anung gear ratio nyo sir? na gamit
Please enlighten me, why use a regular nut and not a lock nut on the rear roller? Will it not be loosened by roller pressure?
Yes sir, since it's stainless steel, it is more stronger and durable when tightening with more pressure than aluminum locknut and also lighter than steel locknut.
@@minivictorydonkey thank you for your good insight, please keep on racing and share us more about the knowledge.
Boss paturo pano ikabit yung hi mount tube stabilizer. Naskip sa vid hehe
Hi sir, check here🙂
ruclips.net/video/ghdGgUc2Jp4/видео.htmlsi=6jNIkCQcVYXF_GbZ
@@minivictorydonkeythanks bossing!
Does bmax allow ultra dash?
sir, san ko pwede bilhin ang mga parts na ito.. meron ka pong link?
saan po maka bili ng mga parts? bagohan lng po ako sa mga tamiya at gusto ko sana sumali dito sa mga tournament sa amin.
Hello, do you have a link for microlon solution you used?
Ano kaya problema nang FMA ko, pag lapag parang di kumakagat yung gear tapos ambagal. Sabi nang kaibigan ko yung lalagyan nang propeller shaft sa rear ay parang nag concave na daw kaya parang pag nilapag umaangat na yung propeller shaft
what size drill bit to pierce the rims?
1.8mm
good day idol. newbie here. question lang ano purpose ng underguard?
@@ricardo.pedrigosa Good Day din sir,
Underguard helps the machine(car) back on track kahit tumama sya sa wall. It also prevents protruding parts like screwheads and rollers from or to be suspended at certain situations.
salamat idol. More power sa channel!
which size po ng cap screw ginamit sa DAR?
How to do the countersink? Thanks
Tamiya has a countersunk bit available
Hi bro, around 37:45, ask ko lang na talagang medj may friction ang roller pag itry iikot? since need higpitan yung normal nut or else mag lloose siya.
sometimes rollers don`t rotate smoothly, but as times goes by it will fix itself or got worse. Maybe bearing spacer is damaged already
What is bmax category. New to hobby
Sa bmax ba kahit anong chasisi pwede?
Sa pang likod po, pwede po kaya regular popsicle lang instead yung x chassis na front frp ?
Yes sir try it, but not sure about performance
sir stock tires at mags lang ba yung gamit mo na kasama sa kit?
Yes sir
@@minivictorydonkey sir last question yung pagkakasunod sunod ng mga parts sa DAR mo pwede ba malaman, wala kasi sa vid hehe newbie lang po
Any substitutes on microlon same effect? I can’t find any in philippines
i like it
Good day! Ask ko lang if nilakihan mo ba yung butas nung mga screw hole sa rear setting mo using a drill bit o nirekta screw mo lang? Currently using your setup kaso nagkakaproblema kami sa rear setting kasi ayaw tumagos ng mahabang screw, parang may tinatamaan siya tapos hindi ayaw na tumagos, worse, naii-stuck na yung mismong screw dun sa screw hole. Sana mapansin. Thank you!
Hi sir, oo nga, tama po ung sabi nyo. This problem is common almost every chassis. Maybe making a tip video about this matter in the future.
Ang ginagawa ko po is gumagamit muna ako ng maiksing screw na may malaking heads para mas madali ikutin gamit ang drivers. Bago ko kinakabit ung permanent screw na mahaba.
@@minivictorydonkey Thanks for the reply!
Muntik na kami mag champion dahil sa setup mo, namali lang kami ng choice ng makina, instead of Power Dash, nag Hyper Dash 3 kami dahil natakot kami baka mag course out dahil medyo technical yung layout nung laro, after the race na namin triny yung Power Dash ayun sising sisi kami haha! Sobrang stable manakbo nitong setup mo. Salamat ulit!
Hi awesome vid! Can you explain what you did with the hollow propeller? Why were you filing it and was that permanent marker? What was it for?
Thank you sir for commenting😊
Its an oil based marker, it gives strenght to contacting gears from loosing when dries. More reliable and easy to apply than superglue.
@@minivictorydonkey Oh that's what is was. Thank you!
@@minivictorydonkey follow up question. What's the brand? Meron din kaya dito sa pinas? Salamat Idol.
Sir where to buy the microlon? Im from philippines
프론트 카본 플레이트에 영상처럼 댐퍼를 달게 되면 주행 후 이탈 시 댐퍼를 끼운 나사가 뒤로 휘게 되는 경우가 있는데, 그렇게 되면 프론트 롤러 각이 변할 수도 있기 때문에 개인적으로 비추천 합니다.
Hi, I unsderstand what you're trying to say here. Thanks for google translation😅.
Don't worry about screws to bend whenever machines comes off the track. Chassis is the most important when it comes to damage during impact.
This is my challenge for you.
Try my front build versus any front build you like. Then let it run and direct hit them to the hard wall. Then see the result for yourself. Screw is nothing important than chassis🫰🙂
can explain what's the purpose of drilling through the wheels to expose the shafts?
because it`s a 72mm shaft
Do you build sfm?
💯💯💯
hi im trying to copy your build and im new in building B-max what's that black thing called in the tip of your front bumper hope you answer my question thanks 😇
You mean the stabilizer (15528)?
@@minivictorydonkey YESS thankss😊
Fighting machine
@@minivictorydonkey hi! how did u set up your front rollers up to the high mount stabs?
Good day sir. Where can I get that microlon solution? Is it originally for cars?
Hi sir, microlon has many variants, it mainly use for engines and machines etc
Pwede ko ba gayahin to with different mach frame chasis sir? Newbie lang po. Salamat.
Yes sir, experimenting is very essential.
anong motor gamit mo dito sir.?thanks🫡
How much total price?
Sir pwede po kaya fluorine coated steel bearing as substitute sa ao 620?
Yes sir, use any 620 ball bearing depende sa budget👍
nice❤❤❤❤❤❤
Is the microlon oil? Can i use just regular bearing oil? And can regular bumper frame be used instead of HG ones?
and what did you use for the side damper screw cap? plastic tubes? or can ballcaps be used?
Hi, I am new to BMAX build and I am curious on what is the whole thing you did with the hollow gear shaft. What is the purpose of pushing and pulling the pinions? Thank you.
adding a marker, strengthening the gear from the shaft
Got it. thank you for the explanation@@minivictorydonkey
Fma는 아무것도 하지 않았을때 가장 좋다
Sir newbie question lang po. Pwede din po bang gumamit ng WD-40 panglinis ng bearing? Sana mapansin. 🙏
@@Unknown-jv9kz yes sir, WD-40 is a very good product to do the job
@@minivictorydonkey ayos hehehe salamat sir. ✌️
@minivictorydonkey sir question lang po ulit. Ano po kayang pwedeng alternative product na same effect sa microlon na ginamit nyo?
Can you put all the accessories you put in your oppa tamiya
Try 2:40
Hi sir., possible pwede din lagyan tapered rollers sa front?
Yes sir, you can add tapered rollers when you feel needed👍
@@minivictorydonkey ilan spacer bearing ilalagay sa green gear sir?
newbie here. What is that black thing called you used to cover after putting the dampers 🙏
rubber tube
Hi can you send me the full specifications of your build? I wanted to try this build. Thanks!
Hi sir, all informations you need about the build are already in the video😊
Question lng sir.. para saan po ung Hg ball bearings na 4 pcs. And 4 pcs na ao 620 bearings? Dba meron na bearings din ung mga rollers? Kaya nagtataka ako pra saan ung 4 na ao bearings?
Dun nya sa roller kinabit.
Pwede ho kaya Pertua Oil and Metal Treatment for substitution po para sa Microlon, Sensei?
Hi sir, I checked what Pertua Oil can do and based on appearance, the oil is very thick and the purpose is to fill tiny gaps to engines core to brings back efficiency. Pag inaaply to sa tiny parts like mini4wd bearings, baka lalong hindi na umikot yung bearing.
@@minivictorydonkey Salamat po sa insight and knowledge ☺
Ano pa kaya pwedeng sub sa microlon
Copper is more conductive than gold. Pero bakit gold lagi lods ang advice na terminals?
Hindi po kasi nag.ooxidize ang gold kaya mas maganda sya for contacts like switches and terminals..
Question lang sir, may cut po ba sa front yung mach frame mo, para mag fit siya dun sa 3mm na plate? Same kasi tayo ng plate sa harap kaso hindi mag fit yung mach frame ko. Thanks po.
Hi sir, what I did is curved the edge and attached with little force
@@minivictorydonkey Same inquiry, but which part did you curve? The cowl or the plate itself? Thanks! Awesome build!
Sir yong para sa motor na gear may kaibahan po bah sa black at violet??
Purple 8T pinion gear is prohibited from use on FMA and AR chassis
Black lang pwede?
Why dis you put a roller spacer on the counter gear? Is it allowed for BMAX category?
Yes sir
Sir, pwede ba magpaturo ng magbuild po?
B-MAXはポン付けが基本で、以下はレギュ違反です。
アルミベアリングローラーからベアリングを外す。
タイヤをヤスリで削る。
コメントありがとうございます。
B-MAXは、使用するパーツは無加工で基本です。
ベアリング交換やメンテなど可能なので、もちろんベアリングはローラーから外すのはルール違反ではならない。だとしても、見分けられににくくなるだけです。
基本的に、ローラーのベアリングはローラーでポン付けられているだけだから。
ペラタイヤ不可能ですが、タイヤのバリ取りは大丈夫だとおもいます。
何かまだ、不明な点等ございましたら、ぜひコメントで聞かせてくよろしくお願いいたします。
how you get tamiya 95259, it's out of stock dude? where you buying that?
I have stock for myself
Please make more vids!!!
Ano yung katumbas ng Microlon dito sa Pilipinas?
Ano size ng spacer para sa gear??
Hello. Quick question for a beginner like me. Why did you have to purchase those shafts when they are already included in the kit? Are they different in length or something?
Thank you sir for commenting.
I preffer hollow propeller shafts, and it has a better pinion gear attached in my opinion.
@@minivictorydonkey thank you for the reply. would you mind to explain the logic behind it? lighter for the shaft? and for the pinion gear?
@@legendary_brigade basically it was made lighter and gears has less contact to chassis giving less friction. Since its a BMax build, modification is limited, strengtening a pinion is the only thing I can do.
16:42 what you use ? bearing or something ?
It just a small washer between Spur and crown gear.
Hi! Newbie question po. Will this kind of build be effective on S2 chassis as well?
Hi sir,
I don't know😄, not tried yet and my current S2 build totally different from Fm-A. Sorry
@@minivictorydonkey Thank you, sir! I wish you could also show us your S2 build.hehe thanks again!
Sir size ng tamiya empty bottle? 10ml? Kasya ba if submerge ung motor?
try the taller one, 46ml (81042)
@@minivictorydonkeythank you sir sa info
Sir ano po page nyo sa fb sir? May mga question po ako hehehe newbie palang po kasi
Join ka sir dito "B-MAX PINAS MINI4WD", I am one of the admins
facebook.com/groups/494340599565163/?ref=share
idol sir, paturo po about sa fitting ng tires, sana ma contact ko po kayo kahit msnger lang po. salamat po. keep safe idol 💯💯💯💯💯💯
Hi sir, thank you po sa comment
You can meet me at this FB group
facebook.com/groups/494340599565163/?ref=share
@@minivictorydonkey wow thankyou sir :)
17:21 is that spacer? Between spur and counter gear?
Just a small washer🤫
@@minivictorydonkey thanks sir, but what is the function of it?
ano po diameter ng tires?? thankyou po ☺️
X brace for AA batteries
hello po sana mapansin pwede po ba ako maka hingi spare parts tamiya po newbie lang po kasi and gusto ko po sana maka alam paunti2x salamat po 🙏 pang Christmas lang po 🎄
Sir, sa 5:59 po, ano po name ng special tools? Newbie here. Thank you sir 😊
Disassembler boss
weird front bumper if you ask me.
Its actually rear plates, but the shape is perfect also for front🫰😁
Sir yong spacer sa gear ano size?? Na try ko mgspacer pero hindi kasya
Small washer yun sir🙂
Ano code ng spacer na yon boss? Small spacer
Small washer lang sir, kasama sa HG brake plates
Drill size you used on mags? Thanks
I always use 1.7mm or 1.8mm drill bit only
Another, can i use side stay MA instead of AR? Thanks
Sing ta maksut awl mu tercepat paling ringan..... Podo prinsip kereta cepat...
San nkaka bili ng MICROLON lods?
Sa Japan po meron😀
what part number yung HG Side Stay? TIA
@@jggarcia7981 Thank you sir commenting, just don't skip the video, every information you need are stated already😊✌️.
Why did you mixed the new and old bearings 😬
Hi sir, the bearing you're meantioning is also brand new, it just opened a days ago
@@minivictorydonkey oh i thought the rest were old bearings 😆 anyway the rest were good and thanks for the video
hey sir, cap screw for what?
44:10
ano yung propeller shaft mo idol holllow gitna??
Yes sir, 3:10 mark
@@minivictorydonkey anu po name baka meron po sa shopee? at ilang mm po??