Welcome back, buddy! Looking forward to seeing your goodies you got from Japan! Nice bash as always, dude! The fan looks pretty powerful! I also got a little Ryobi 18V blower, but I hate it, it's really weak... Mostly I use my big 1800W pet dryer, it's got proper power... Funny, today I was drying a car, I accidentally powered up the ESC by blowing on the fan, ha ha, hopefully I didn't overvolt anything...
Blower looks nice for a quick dust-off before putting the RCs back into your car, or for use back at the work bench if you don' t have an air compressor. Looks powerful but maybe not quite enough to get the sticky/wet gunk blasted off like you could do with a compressor.
The blower worked a treat for loose dust and dirt ... Yea most blowers have a hard time getting the wet mucky dirt off ... But all in all it did a real good job 🔥
If you slap some sledgehammer tires on the Rustler it will become a monstertruck. Including the tumbling over in corners though. But it gives it a lot more ground clearance. I did have to gear it down quite a lot to make that wor though (11 or 12 tooth pinion).
Great video, I want to get one of these smaller trucks 🛻 also not sure which one to get , I like good handling , but I also like doing flips as well tough choice 😊
When a company sends out a product to test the best way to actually test it is on the track 🔥 The mt10 is a little beast of an rc for sure , love it ...thanks
@@kaosr.c I’m kinda torn between the MT10 and Maverick Quantum2 Flux. Any experience with that one? It’s around $50 cheaper here in the states but it’s HPI’s cheaper brand vs Team Associated, so maybe the MT10 takes it for that reason alone. Anyway thanks Kaos. Looking forward to checking out your channel/content… and the Japan trip details! :)
@jokur2630 for my personal preference and taste i would go the mt10 simply for the centre diff ... Im just not one for slippers ... Although the Q2 does look really good and fun ... I have an older quantum and it is ok .... Thanks again 🔥
Whats the smallest rig you could run on grass and have decent races against an xmaxx? Gf is gonna need one too, but don't want it to be too small. I was thinking arrma 4s, but I'd like suggestions 👍
@@kaosr.c Thx mate, i'm new to the hobby, so i'm investigating for my rc car, i was waiting to have more information about the mjx hyper go 10208, but first review are not so good, and then i found this Rc (MT10 V2)with your videos. Well now i've to think which one choose, with price on the table ! Thx again mate !
@@kaosr.c well, if you can confirm me that just on stock with 3S lipo i can bash backflip easyly, and have a decent speed, i will certainely buy it ! Thx for your advices !
@@kaosr.c They look to be about the same size, but I can't find anyone, anywhere that's done it (or anything similar), so I've got nothing to go off of!
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Welcome back, buddy! Looking forward to seeing your goodies you got from Japan! Nice bash as always, dude!
The fan looks pretty powerful! I also got a little Ryobi 18V blower, but I hate it, it's really weak... Mostly I use my big 1800W pet dryer, it's got proper power... Funny, today I was drying a car, I accidentally powered up the ESC by blowing on the fan, ha ha, hopefully I didn't overvolt anything...
Thanks man !!!
Yea for loose dirt this blower did a really good job ! The pet dryer sounds awesome 😅👍🏻
Nice little blower, thank you for testing
Thanks man
Yes i was actually quite surprised how well it worked! 🔥🤘🏻
Welcome back
Mt10 for me....seems more stuntable just like you said
Its hard to beat for sure ...
Blower looks nice for a quick dust-off before putting the RCs back into your car, or for use back at the work bench if you don' t have an air compressor. Looks powerful but maybe not quite enough to get the sticky/wet gunk blasted off like you could do with a compressor.
The blower worked a treat for loose dust and dirt ... Yea most blowers have a hard time getting the wet mucky dirt off ... But all in all it did a real good job 🔥
If you slap some sledgehammer tires on the Rustler it will become a monstertruck. Including the tumbling over in corners though. But it gives it a lot more ground clearance. I did have to gear it down quite a lot to make that wor though (11 or 12 tooth pinion).
@@MrDani3lsan yea ive been thinking about getting some for it .... It looks good with them on .... Cheers 👍🏻
Great video, I want to get one of these smaller trucks 🛻 also not sure which one to get , I like good handling , but I also like doing flips as well tough choice 😊
Thanks mate
If you love backflips then the rival is the way to go 🔥🤘🏻
More of an infomercial for that blower than an RC video but love the track, the MT10 and nice driving
When a company sends out a product to test the best way to actually test it is on the track 🔥
The mt10 is a little beast of an rc for sure , love it ...thanks
@@kaosr.c I’m kinda torn between the MT10 and Maverick Quantum2 Flux. Any experience with that one? It’s around $50 cheaper here in the states but it’s HPI’s
cheaper brand vs Team Associated, so maybe the MT10 takes it for that reason alone. Anyway thanks Kaos. Looking forward to checking out your channel/content… and the Japan trip details! :)
@jokur2630 for my personal preference and taste i would go the mt10 simply for the centre diff ... Im just not one for slippers ... Although the Q2 does look really good and fun ... I have an older quantum and it is ok .... Thanks again 🔥
@@kaosr.c Oh, it has a center diff instead of a slipper clutch, I didn’t realize that. That settles it then, MT10 it is then. Thank you!
@@jokur2630 yea man Mt10 centre diff 😁
Whats the smallest rig you could run on grass and have decent races against an xmaxx? Gf is gonna need one too, but don't want it to be too small. I was thinking arrma 4s, but I'd like suggestions 👍
The rustler is a good choice or a buggy .... T.C spark or similar
Which do you prefer out of the box, MT10 or Rustler? Thanks
@@Merlin-JW id have to go with the Rival 👍🏻
@ Thanks for reply. That’s what I’ve ordered but after watching your video, I wondered if the Rustler handled better. Maybe it’s just me.
@Merlin-JW rustler handles better for sure, two different cars ... Rival is a tank ... Its a blast
@ so you’d say that the MT10 is more fun then?
@Merlin-JW for backflipping yea definitely ...
Where can you get the fan? Amazon has lots of options but this one seems trustworthy?
@@macktsang GT power had sent me this .... Im guessing you can get them from hobby stores
Hello, were you using the MT10 with all stock ? and with wich battery ? Great Vidéo man have a nice day !
Hey mate , thanks
Yep all stock apart from a diff tune ... A youmee 3s lipo i used 👍🏻
@@kaosr.c Thx mate, i'm new to the hobby, so i'm investigating for my rc car, i was waiting to have more information about the mjx hyper go 10208, but first review are not so good, and then i found this Rc (MT10 V2)with your videos. Well now i've to think which one choose, with price on the table ! Thx again mate !
@@Tahia1 mate the Rival Mt10 is the best option for your first rc ... Its super tough and easy to work on
@@kaosr.c well, if you can confirm me that just on stock with 3S lipo i can bash backflip easyly, and have a decent speed, i will certainely buy it ! Thx for your advices !
@@Tahia1 I have mjx 16208 for first and was thinking to upgrade with 10208 but definitely will be mt10 :)
I've got a burning question for you:
Would it be possible to fit a Rustler 4x4 VXL body shell onto a Rival MT10?
Not sure mate , maybe with some mods 👍🏻
@@kaosr.c They look to be about the same size, but I can't find anyone, anywhere that's done it (or anything similar), so I've got nothing to go off of!
Rustler is so cool. It's a vehicle that I want to try someday.
Its such a fun rc 🔥👍🏻