@@shitbox82 legit 370 or is it actually a 364? I see alot of people say 370 but that would require the cylinders to be bored .030 over and have aftermarket pistons to accomidate.
@@ritchardposterior262 Why would I say it’s 370” if it were a standard bore 6.0? I’m pretty sure I know what my engine combination is, I built the fuckin thing. 🤣
what all did you have to do to the f body chassis to adapt the LS? Motor Mounts & Headers? You running a carb with this setup? Seems like a awesome bracket car for sure. Love it man!
I have a racecraft kmember, speed engineering ls swap headers, I have a 1050 dominator carb on it currently. I have a Holley Terminator x controlling the ignition
Just curious howany runs did u get with running cam only with the 250 shot reqlly wanna know hoe long the engine can hold up and how many races it can take before the motor goes
I run a small fuel pump on my carbed nitrous 5.3 in a 91 s10 its actually a diesel fuel pump but fits in factory location and its treated me good so far no drop in pressure on a 150 shot I can't go bigger my converter does not like it
God I love 5.3s 🔥💪🏼
You’d love a 6.0 or 6.2 more. 5.3 in a truck is a slug but the do move the impala ss quick though
@@codykalendek8702
My NA pump gas 370” 6.0 almost runs 11’s in a 3200 lb car (plus fat ass driver) at 4500 ft elevation, they work for sure. 👍🏻
@@shitbox82 legit 370 or is it actually a 364? I see alot of people say 370 but that would require the cylinders to be bored .030 over and have aftermarket pistons to accomidate.
@@ritchardposterior262
Why would I say it’s 370” if it were a standard bore 6.0? I’m pretty sure I know what my engine combination is, I built the fuckin thing. 🤣
@@shitbox82 Lotsa people don't know and round up. i am currently building a 370 hence why i asked
I’m inspired. So I don’t have to buy billet this and turbo that to have major fun at the track. Awesome pass! Subbed.
Decent chassis and a little juice = a lot of fun
None of that is needed for fun in an f body. The spray isn't even needed. Cam, converter and full suspension with weight reduction is just as fun
Damn a 9.6. Crazy
Sounds awesome! Great pass! Nice ending 🙂
What rear end is taking that launch? That’s really impressive for a cam only 5.3 and some spray. Awesome ride man!
For real it looks good for sure
9”
9" and what kind of gear?
@@payneracing3152 what ratio
Cool set up
Moving ✊🏿👍
That Thang scatted!!
what all did you have to do to the f body chassis to adapt the LS? Motor Mounts & Headers? You running a carb with this setup? Seems like a awesome bracket car for sure. Love it man!
I have a racecraft kmember, speed engineering ls swap headers, I have a 1050 dominator carb on it currently. I have a Holley Terminator x controlling the ignition
Do you use the Holley for a progressive
Just curious howany runs did u get with running cam only with the 250 shot reqlly wanna know hoe long the engine can hold up and how many races it can take before the motor goes
Motor was in 3 different cars. Lasted for years
Nice
What intake and tranny? Saw some other parts mentioned in the comments. Badass run man
Vic jr and power glide
Awesome ride man what does it run on all motor in the 1/8th
Not real sure, it went bottom 11s In the 1/4
Are you spraying on the launch?
Yeah
Do you need arp bolt head for more nitrous
Carb or efi? What fuel system and cam.
Carb
You running stock or aftermarket fuel pump?
Aftermarket
I run a small fuel pump on my carbed nitrous 5.3 in a 91 s10 its actually a diesel fuel pump but fits in factory location and its treated me good so far no drop in pressure on a 150 shot I can't go bigger my converter does not like it
What cam?
Martin Smallwood custom nitrous grind
👍🍻
You run pump gas?
Anything over a 150 shot I run good fuel
Time?
Did you gap the rings any
No
What did u run 1/8mil
6.10@113
3000 ft DA
Do you have any head work
stock bottom end?
Completely stock other than cam
Was this a wet or dry?
Wet
What trans and gears on rearend
Power glide, 4:10 gears
I have a similar setup can I contact for some tips
How much out the hole?
250
was this reall a 5.3 i kno you have a 408 now
Yeah lol when I first built the car I had a 5.3 and nitrous
Which converter
Ptc
where is this?
Hagerstown MD
Cam only?! And nitrous ? Really??
Yeah
This just sold me on getting a LS motor to build now
Wat size gear in tranny nice ride.
1.80 glide
Did you eliminate the torque arm
No
No progressive?
I have a progressive on it but I didn’t progress it on this pass.
60'?
Can’t remember exactly but I want to say 1.30
If it had the right converter could have been a lot better, it was blowing through the converter a little bit on this pass
Did you use a standalone
No just ran everything off a pro star 500
Hp, weight?
Not sure on hp, weight is 3174
Not for long lol
You’d be surprised lol
You’d be surprised lol
😒
Nice