Foil Drive Tech Talk | Ep 01 | Foil Drive Motor Design

Поделиться
HTML-код
  • Опубликовано: 17 сен 2024

Комментарии • 17

  • @andylitespeed
    @andylitespeed Год назад +1

    Thanks guys, this video is much appreciated!

    • @foildrive
      @foildrive  Год назад

      Thanks Andrew, glad it has helped!

  • @dkschrei
    @dkschrei Год назад +1

    Nice integrated cabling on the Cedars mast, didn't even know that was an option. Thx for the video.

    • @foildrive
      @foildrive  Год назад +1

      The Project Cedrus integration is being released in the coming weeks! A little teaser :)

  • @MissEmaK8
    @MissEmaK8 Год назад +2

    So informative guys 👏

  • @marekkaniewski8789
    @marekkaniewski8789 Год назад +1

    Great vid, thank you

  • @peaplecreative
    @peaplecreative Год назад

    Nice job with the video, very informative 👍

  • @jeremyalmeda5307
    @jeremyalmeda5307 Год назад +1

    Is there a video showing exactly how to grease the shaft? Should grease be applied to inside of motor can as well?

  • @seagullnz
    @seagullnz 11 месяцев назад

    At 9:50 you mention ways to care for older motors, including taking the pin out. Can you please post a link to the 2 hour video you mentioned, I'd like to see the detail of cleaning/lubricating the rotor on < 2023 motor

  • @umarter
    @umarter 3 месяца назад

    In Europe, there is no WD40 Lanolin available….can it be replaced by White Lithium or Silicon Lubricant?

    • @foildrive
      @foildrive  3 месяца назад +1

      Best is to use the White Lithium if you do not have access to a lanolin based lubricant. Dominic in the Netherlands uses "WD40 White Lithium Spuitvet White Lithium Grease"

  • @dminnerop
    @dminnerop Год назад

    Thank you for the great video. As far as maintaining/cleaning the motor would running it briefly in the pool after a session suffice?

    • @shiregopro
      @shiregopro Год назад

      It's certainly better than nothing but the best will still be submerged or sprayed out in clean fresh water with the rotor removed.

  • @jeremyalmeda5307
    @jeremyalmeda5307 Год назад

    Can you really clean and maintenance the bearings when they're permanently installed and are not meant to be removed?

  • @rolandjacques649
    @rolandjacques649 Год назад +1

    what version WD40 should we use in the U States? we dont seem to have that version

    • @foildrive
      @foildrive  Год назад +1

      www.amazon.com/Fluid-Lubricant-Corrosion-Inhibitor-11-75/dp/B00PWZ0XNM/ref=sr_1_12?crid=3CNGK32RHLPY&keywords=lanolin%2Bspray&qid=1676249462&sprefix=lanolin%2Bspray%2Caps%2C367&sr=8-12&th=1&fbclid=IwAR2GWdtBsfWFlaahP7nSyNt74FBZHZO9C7tI_Y5qU8N6ClTQKu1sdUbeTXg

    • @DavidFoxDotCom
      @DavidFoxDotCom Год назад

      @@foildrive Thanks. After quite some searching I going to ask same question!