Knife Porn at BHQ: Blades You Should Know About
HTML-код
- Опубликовано: 2 дек 2024
- I drove down to BHQ for a counter review for ya'll. I pick out my favorite and interesting blades for us to discuss. Jake from BHQ hosts. We hit a lot of ground in this TNP Knife Nation special visit. Blade HQ remains a premier knife seller and associate of TNP. They offer a huge selection and excellent service. Blades covered in this visit by Nutnfancy and Jake: blade boker f4 epicenter,boker ridgeback,spyderco manix 2 xl,spyderco paramilitary,kershaw 1556 cryo 2 black,zero tolerance 0556 hinderer,more knife review,mora companion,bradford black guardian 3,attleboro,esee zancudo,sebenza 21 large insigno,kershaw emerson,sog visionary 2,sog spec elite auto,bhq prep cord,boker plus stingray,microtech venomtech auto,benchmade 940 cf, benchmade flightanium butterfly///////////See my BHQ page at: www.bladehq.com...
Things I love about this channel.....40 minute knife videos. Got to love nutn.
I never really knew knives until I started watching your videos. You convinced me of the utility and both first and second kinds of cool when it comes to knives. I am just a knife novice, but my collection is growing rapidly. Keep up the good work, and thank you for all that you do.
Time for another bladehq visit!
Videos like this make my credit card burst into flames.
I live in California so you can't pull out a toothpick without someone getting all but hurt and acting like some crime is being committed. But I do daily carry two knives. One I seen on here and the other is a cold steel code4. I don't take the code4 out much in less I really have to. No need to have Johnny law called because I want to open a letter as i am walking into my house. Really it's happened. Freaking California. I moved here from Florida where everyone had guns hanging in there back windows. The last 12 years here have been interesting. Thanks for all the great information. Just found the channel and subbed.
i want that benchmade 940-1. bad. i can tell it's the ultimate EDC knife for me.
Go for it homie, you've earned it
555 Gear hahaha. thanks!
Yes!!! It is!!!! I got one. Perfect edc.
MattV2099: Guns & Food i had one since a few months, it doesn't come razor sharp but it cuts!!
MattV2099: Guns & Food Way too small, light, and expensive in my opinion.
Nutnfancy is much more of a gentleman than the late boy scout
i love knives, but $500, I'll buy a gun
it'll be fun to watch you open letters and break down cardboard boxes with the gun instead of the knife.
it'll be fun to watch you open letters and break down cardboard boxes with the gun instead of the knife.
it'll be fun to watch you open letters and break down cardboard boxes with the gun instead of the knife.
That ZT is a stainless framelock, not titanium. That's why the weight is high. The upcoming 0562 is pretty much the same but in titanium, has a locking bar insert, and will be offered with CF scale. That will be an awesome knife.
PLS DO MORE OF THIS I LOVED THIS VID
THANK YOU, I enjoyed the video. I like the fact that you are able to review so many knifes, giving the important info.
I love what you said about the Sebenza (and I do like Sebenza's). You were totally honest and upfront.
Now this is the stuff that i subscribed for back in the day to this project. We need more knife porn like this one bro !
In 1080p!
Those angles, that lighting!
I want to add something to people's consideration who think something made in Taiwan matters.
When I was a kid, everything said, "Made in Taiwan." Now everything says, "Made in China." I studied China for 3 years in college and lived in Taiwan from 2012 to 2013. Taiwan and China are not the same. The Taiwanese economy is also going through difficulties similar to ours because they also lost all their manufacturing jobs to mainland China and have had to shift to a service and quality goods economy like ours.
When I was in Taiwan, one of the little surprises were these mini-factories I would see in the first floor of apartment buildings or homes; my friends told me that there used to be many more such factories before the manufacturing jobs went to China.
Do not assume that "Made in Taiwan" means what it used to, or that it means the same thing as, "Made in China." If you want to buy, "Made in the USA" I understand perfectly, just know that the negative stereotype may or may not apply to Taiwanese products nowadays. Having met the people, I would be proud to buy a product made in Taiwan. I am not surprised Spyderco's Taiwan made knives are well executed and plan on getting one once I am out of Japan, the land of blades 6cm or less.
David Hynes I always try to buy American made products but if I can, if I can't then I will happily buy products from Taiwan because they have given the finger to China for decades.
Hey Nutn, great video as usual. Hope to see a review on those Kershaw Emerson collaborations. They actually do have a few clip-point liner-lock blades with some G10 scales that are pretty sweet.
Love the Attleboro knife.
Great... I didn't have any knives on my radar for about a year until I watch this video. I guess it's time to add to the collection. Thanks a lot nutn.
Please make this a annual series!
I love horizontal carry. I wish it was more popular!
Got my ESEE Izula rigged up that way on my belt and love it. Much quicker for self defense in close quarters if needed.
Why only 8lb test in the prep cord? I would go with 12/14 at least so you could handle larger fish like small mouth and large mouth bass and not just panfish. Have to catch a lot of bluegill or perch for the same meal as one large mouth. Just sayin'
I have the Benchmade 942 and 940 as my EDC blade which I've been using for 6 to 7 years now. No issues what so ever! Amazing light knife. I highly recommend it. It really is with it
Great job as usual you deliver quality video and loads of info. TNP
Great vid! Like to see more visits like this!
Awesome video Nutn,lots of nice blades shown.
Best video you have done in a while nutn, great stuff
1000+ points for the Blue Train shirt.
Great knife vid. Got to look at a bunch of knives at different price points.
I think it is shopping time. Thanks Nutn.
10/10 vid AGAIN. Loved the auto knife and the kershaw blackwash. Cool place to work.
Just watched CutleryLover's video and wanted to say that sending that card and money was extremely amazing. You seem like a fantastic person.
The guy behind the counter can't keep from giggling when he shows off the Venomtech; definitely a knife guy.
I have been EDCing the Bradford Guardian 3 fixed blade you showed at work for a few weeks now. Worth every penny! Awesome little knife. Luving the N390.
M390
Great vid Mr Nutn, For those of us with steel addiction, might as well turn people on to Blade HQ. It is some of the only spam I get that I like , and frankly , they do very seldom send any . Really thoroughly enjoyed this , thanks.
Thanks for the link to this store, and the review. The paracord change is a great one :D
I'm LOVING those Bradford blades!
Great video. But no cold steel knives? :(
Don't feel bad Nutn I'm a knife guy to and about a month ago I went and got 6 stitches and I love the Reeves knives I carry mine a lot. Mine has actually been used to scrape gasket off of an engine and you can't even tell it has been used they not only look good but work awesome to.
How did I miss this video? I like those carbon fiber knives... Every one of them! I agree on the Mora Heavy Duty Companion. Love it... I keep in in my Bugout Bag. I'm surprised at his initial assessment of the Kershaw Emerson knives but once they are carried they are second to none IMO. I just reviewed the CQC-7k -- so much win! I hope I get stationed in Utah... I'd love to go to Blade HQ!
I was surprised you didn't cover the new Kershaw strobe, or had it not come in yet when you guys shot the video? Really looking forward to my pre-order from bhq coming in sometime this week on that knife.
Does the spyderco dice come with a qualude?
I don't see any sawvivor's any where. What would you go with, the sven saw or the EKA?
Love this. Couldn't get enough.
Damn you and your BHQ visit!! Now I HAVE to buy more knives!! Loving that benchmade in carbon, the Spyderco, the fixed blades... Crap. I like almost all of them. My wallet is about to take a beating!!
I would buy all of them if only I had the money!
This video is not friendly to the credit card. Love what you're doing Nutn'.
That first blade wtf woah
I bought the cf Osbourne mainly to just collect and I can not stop carrying it!!! I don't care that It's 250ish. It's worth it... The cf somehow gives me just a bit more grip than the aluminum version. this is my first experience with s90v and I must say. So far blown away, going on 3 month and it's still hair shaving sharp... Haven't even ran it on the strop yet... It has replaced my manix light weight, my knockout, and my zt. Seriously blown away.
Oh wow. That made my jaw drop when I saw the blade. I was watching the video with my wife...and I said. What a small blade what is going on. Then he hits the button and out comes the rest. I was happy to see it. Jump out.
Looks like an awesome blade sir.
I will take them all.
Wow, "Knife Peoples Paradise" - I want to be in the US !!! Greetings from Germany, Thank You very much for showing !!
@22:42 isn't the carbon fiber osborne 940 like the red one that hooked Nutn on "knifes" in the first place? The thin-ness of the blade is almost rare in these days -. thin wins for alot of tasks, IMHO...Thanks for the nicest Nutn knifes vid in awhile. I like the way he turns and says "how much, price team?" Kinda charming, Nutn team...
Love the BHQ videos!!!!!!!!!!!!!
BladeHQ is awesome. I've ordered from them a couple times and always have questions and always get quick replies w/ solid answers. I will order from them again.
i saw the manix come up and was like, omg, then proceeded to grab it out of my pocket lol.
Awesome video one of your best ones no doubt
I wonder why they don't show that 940-1 carbon handle on the Benchmade site?
Excellent video! Jake did a terrific job and I am very interested in a few of those blades. I like both to Boker's and I also like the ESEE Zancudo and several other blades too. Blade HQ is an awesome store and I sure would like to visit it one day. I have ordered several blades from them and their turn around is usually very fast and I live in GA. Hey Nutn, how about doing another video at Blade HQ...?
The Bradford knives look tempting. The company is only about a 15min drive from me, too. I'm in Redmond, WA and they're down in Renton.
Yeah I like the look of them too. I am surprised that they did not point out the M390 steel, I mean that is one hell of a steel, maybe even a super steel. It is a good step about CPM s30v, and not to far behind S90V.
interestingly, the 3.5 " blades are all sold out. i think everyone wants one.
Yeah it was also a rather limited run to start with... like if you look at Gavko knives, they often are sold out with in a week or two of coming up on the BladeHQ page if not sooner.
I only have a few knifes, one of them being a frost cutlery fixed blade knife with about a 9' blade (idk the actual model name) and I quite like this knife, but is frost cutlery a good brand? opinions would be much appreciated.
I'm drooling over that new Benchmade.. and the all black Spyderco Manix II... gulp... funds are low... what do I do? lol... Thanks Nutn, great video.
Informative and fun video. I felt as if I was hanging out with you guys, all the while I'm thinking I've gotta sell a few of my things so I can buy at least two of those knives! Ha ha!
Now this was a fun vid to watch!
Gah, Nutn, I just bought the Boker Ridgeback last week and it arrived yesterday! I love it so far. I am probably going to look into a modification for the sheath to mount differently, its like a bastardized techlock.
Isn't there another Paracord out there that has the 8lb fishing line in with the seven normal strands AND a separate "firestarter" type strand that catches a flame super easy? I forget what it's called.
I have to have that SOG auto. The Mora looks like a great value, I'm getting that for my truck/get home bag. BTW, I just picked up the ESEE Izula stainless wit the kit and I love it. The Izula has gone straight into my EDC system.
Hey Nutn, do you think you could work up some kind of traction gauge to give us online buyers a better idea of how well these knives grip? We don't always get to hold them before we drop the hammer.
Something as simple as a traction pad on a pivot. Increasing the angle till the traction is broken. Just to give us a direct number to compare the materials and textures. Like you showed in this review (Visonary II vs Zancudo) and many others, texture plays just as big of a role in traction as the material.
LOVE that Stingray btw.....would not be able to put it down.
I was just over there on the weekend. God dammit Nutnfancy I keep missing you
I think this is a really old video as he's reviewed the microtech knife
Yeah I also think it's old due to him talking about the prep cord. I think he didn't want to spoil upcoming reviews
Just bought the mora knife for camping with. Cheers guys.
O.K.....Blade HQ is gonna get another 200 bucks from me, thanks Nutn....Awesome vid!
I love the krvs nutin keeper coming love all the vids thank you for the addiction
I love this video. Make more if you can Nutn. And always, Thank You!
Loved your 'WHAT" in the beginning.
that first micro tech out the front is SICK
Nutn, im warning you, some day you will give me a hearth attack with vids like this lol. Awesome stuff!!!
Nutn whats your stand on the Esse survival knives?
Go watch the reviews
ESEE Izula's rock! I have the red one from BHQ and carry it all the time. I don't think Nutn has done a review on them but there are plenty here on YT.
yah cant recall nutn every doing a review on esse
He has, it was back when they were still under the RAT Cutlery brand, I may not be right on the specifics, but they split into two companies, due to design differences. So Rat Cutlery became ESEE and Ontario RAT. Nutn reviewed the RC3,RC4, RAT 3 and RAT 7. The RC knives are still available under the brand ESEE, the RAT's are Ontario's. TBH they are pretty much the same, except Ontario do not have ESEE's lifetime warranty. Hope that clears it up.
crystal thanks!
Nutnfancy, time to review a Mora yo!
Use the SOG Trident with the seat belt cutter for cutting the twine on bales of hay. Also not stone washed , but did the washer , dryer cycle one time in the 5.11 slacks in the knife pocket -sat L O W. That auto knife at the start -intimiating.
Remember the "Ten Essentials", tjl Sent by Win7Pro64 w/ADSL
I got the manix from 2007 the large version CMP S30V with a kris. holds up like a champ. If you like quality and a long servicelive look no further than spyderco.
....there goes my paycheck
Really wish that CF PM2 was on the website, would've bought that in a heartbeat.
Would love to see a review on the SOG spec elite!
Excellent stuff!
the shop banter videos are great
That Mora is sweet. I got one and sharpened the spine so it throws sparks with a ferro rod.
I would love to see a review on the Boker Stingray folder.
the visionary 2 says vg10 on the side, but it sounded like you were saying it was aus8,@nutnfancy
MrGnarman Nearly all SOG's knives use AUS-8 steel with a Cryo treatment so he was assuming it followed the trend without looking at the blade that closely. He said 9.5 out of 10. I wonder if it'd be a 10 if he realized it was VG-10.
***** word. that's a good proposition.
I feel like a knife diabetic, and I just got a huge dose of metal insulin. Love that you did this, Nutn. It gives the folks that don't have access to the store some great exposure to knives they wouldn't see or maybe wouldn't even consider. Myself, I was actually impressed with some Boker and Benchmade offerings for once, and I was really drawn to the smaller, independent knife maker's knives. I think Kershaw, although they've got this new Blackwash thing going, is still in a 2- to 3-year rut, where every knife sort of looks the same, and there's just no imagination or spark, or even novelty (I did like the wave feature though). And I'm not necessarily a Kershaw basher; I own several of their knives. I just haven't bought any of their blades in at least 2 years. Interesting to hear you comment on the ESEE Zancudo. I took a chance on it, and all I can say is, make sure you get your favorite color, and save a place on your desk for it, because opening letters is what it's best suited for. 4/10 for me, and that's being magnanimous.
I've never held a Sebenza. I'm interested to see if the hype is real.
Will Nutnfancy ever get a custom knife?
So much fun listening how he tell story about each knife. Fun Fun
What! No Cold Steel?
I have 2 x100' of the prep cord and have bought several knives from BHQ. Thank Nutn, BHQ! I only buy (at least almost...) high value, Nutn reviewed blades. Those disc shaped thumb studs would probably mess with the EPA...not happy with that.
Just bout a para 2 from blade hq. First 100+ knife, and i love it!
I've always have taken issue with spydercos pricing on over seas produced knives. If Im spending 150 plus on a pocket knife I want it supporting American jobs. At those prices they can do it. So why don't they? Profits pure and simple. And carbon fiber laminate? Lame. I still purchase from them I just take it into consideration.
Its neat seeing the actual store. I am an online shopper. BHQ has shipped enough steel to Richmond lately to sink it. I opted for the Fire Cord over the prep cord. I try to combine a fire steel along with Fire Cord for lashing with all my knives. I couldn't catch a fish with a rod nor reel so the line won't be of assist to me. But, I can spark you up a fire in the pinch.
flytanium titanium 51 is sick. Just got the normal one a few days ago and while it flips nice id bet that one trumps it
Great Vid, thx Nutn!
where is the bhq showroom?
Holy crap...that Boker is beautiful.
Good video. Lots of cool shit.
I'm holding out on buying a new knife until the next batch of SOCOM Delta's hit, by Microtech. I've been EDC'ing this Delta Tanto point for a few months now. I love it so much I'm going to drop another 250 for a clip point version... when they come out again!
The Attleboro does have a Chris Reeve feel to it and inspirations because the designer used to be one of lead guys a CRK.