Happy Friday my dudes. Thoughts on this build? And what to build next? 🤔 Edit: Good catch on the water level & air bubbles in the cpu block. I have to drain it before shipping it to the winner, but I'll remind whoever wins it to bleed the loop!
You've built a lot of small form factor PC's, and many others have as well. How about flipping it upside down trying to build the BIGGEST form factor build you can think of?:D An absolute unit, possibly even prioritizing size over performance so if there's for instance a smaller GPU that can perform better then you always go with the bigger one, and so on.
I would be extremely interested if you did a SFF hardline build. They're much more impressive and pretty compared to a massive build with a lot of free space in my opinion
@@woodduckThat is also a good option with the hardline approach. Regarding a lot of free space my hope would be that there wouldn't be so much free space, precisely because everything in it would/should be massive :)
The RGB colour you picked around the 11minute mark to show off the build really made it look amazing! Same build as the end scene with the rainbow colour, but did not look as sleek and finished.
Bruh this video is so sick. The bends are wild, but also inspiring & confidence building. The dope edits paired with the 80’s style pop music with the sax melody brings it all home lol, love it mane.
@@MatthewSemones If air is trapped like that then setting the pump speed to 100% should get 95% of it out alone, if not then it's a terrible design flow wise. It's also good practice to tip/lean the pc around to help remove trapped air pockets.
unsolicited recommendations for folks new to custom water cooling: 1. Agreed booting or maybe even installing Windows outside the case is a great start! 2. Use EK ZMT tubing or some sort of soft tubing for your first build, it’ll likely be challenging enough without having to make bends. 3. Buy some extra fittings (especially nice to have some angled 90 degree connectors in my experience) 4. Build it with maintenance and easy draining / filling in mind. 5. Use clear distilled liquid with an additive to help prevent corrosion and goop from gumming up your blocks. 5. Don’t use opaque fluid unless you’re willing to drain / cleanse / replace regularly. Even the colored translucent liquids can be hard to fully clean out. 6. Use a guide for GPU disassembly / block assembly, and take lots of pictures along the way.
I’ve seen my fair share of custom loop builds (including your pal Jay), and those are the most precise bends… well, ever. Insane! The was no luck here, just patience and talent. Great work Kyle!
Honestly a great way to end the day is watching one of your videos! This is a sick looking build and suuuuuper clean! One day I want to try custom water cooling!
Love the build some of us were still waiting on that dual system build with phanteks case but it’s all good. I would love to see a build in the NV9 by phanteks. Overall love the pleasing design of a hardline build
Wow, amazing pc build. Can't believe you're giving it away! Love your work with tech and also the admirable fundraising you do for the kids. My fingers and toes are crossed - my wife has commandeered my pride and joy after I got her into PC gaming *fistpump*, so now I'm slaving to get her own. GG's everyone and good luck!
First time seeing one of your videos and as someone who's never built a modern PC before but thinking of doing it, I have to say it's was great fun watching it. I'd definitely love to win something like this since I couldn't afford those specs but even if not, I think you've convinced me to do as close to an all white build as I can. Thank you.
I actually like the fact that you tested all the components before assembling it all. I believe that it should be the norm when you can do it. I do know that it is not practicable when you are building a computer on your own. I agree with others that seeing you assemble things with both of your hands is safer and less hard on you although it does require someone else to help you with the video creation. On the down side: I have become somewhat disillusioned with the giveaway since almost everyone gets less than 1% chance of winning it. On the other side of things: I have always enjoyed your innovative way of making the video content. Sometimes it's slightly overkill but always enjoyable. I also like the fact that you do not sugar coat when things don't work the way you want it to. That's accountability at its finest!!!
Of course I love you Kyle, after all these years and how often I watch you when you aren't looking, especially while sleeping, how can you not know that by now? Hey Kyle, did you ever do a custom water reservoir made out of the infamous beer bottle? That would make a fun build.
Nice to see you ack Kyle, hope you're ok. Stopped watching for a while (I remember you three channel names ago), but my PC was stolen so gave up with PC stuff.
That's the one, a hard-line pc build up and looking this God damn good, way better watch then just slapping an AIO on it and calling it a day!! Nice call on the "420" entries as well nice touch bro 👌
I think gettin a prebuild "custom water loop" is way to start, after you are done like 2 years with it, you practise cleaning it and swappin liquids. I am still messing around with AIOs, just to get the feel.
Ive been saying the same thing about thier GPU waterblocks for years. Id like to see more clear sections and there needs to be a white option. Also this would be great with a verticle gpu mount
If you're running a 1080p monitor is it fine to have a 7900x3D and a 3070 or 3060? I play a game that isn't GPU intensive, so I was thinking as long as the GPU exists it'd be fine.
Happy Friday my dudes. Thoughts on this build? And what to build next? 🤔
Edit: Good catch on the water level & air bubbles in the cpu block. I have to drain it before shipping it to the winner, but I'll remind whoever wins it to bleed the loop!
man that it clean! i want a water cooled pc bad
Great job, those runs look perfect and aesthetic!
You've built a lot of small form factor PC's, and many others have as well. How about flipping it upside down trying to build the BIGGEST form factor build you can think of?:D An absolute unit, possibly even prioritizing size over performance so if there's for instance a smaller GPU that can perform better then you always go with the bigger one, and so on.
I would be extremely interested if you did a SFF hardline build. They're much more impressive and pretty compared to a massive build with a lot of free space in my opinion
@@woodduckThat is also a good option with the hardline approach. Regarding a lot of free space my hope would be that there wouldn't be so much free space, precisely because everything in it would/should be massive :)
11:45 Half CPU block is air bubble - build is done XD
The RGB colour you picked around the 11minute mark to show off the build really made it look amazing! Same build as the end scene with the rainbow colour, but did not look as sleek and finished.
Kyle, it's so much more enjoyable when I see you using 2 hands !! 🤣
that's what she said
Bruh this video is so sick. The bends are wild, but also inspiring & confidence building. The dope edits paired with the 80’s style pop music with the sax melody brings it all home lol, love it mane.
This is the cleanest custom loop pc build ive ever seen. Looks amazing!
@Bitwit : Kyle you forgot to bleed the air out of your loop, the CPU waterblock is still half full of air !!!
with the inlet and outlet at the bottom of the CPU block that air will never come out, it has no path to escape
@@MatthewSemones ever heard of laying/tipping the PC case on its side to bleed your loop ???
Thinking the same thing, water block full of air is about as useful as a half empty radiator.
I'm not a water-cooling expert by any means but was wondering if that cpu block wasn't getting enough water...or if that was typical
@@MatthewSemones If air is trapped like that then setting the pump speed to 100% should get 95% of it out alone, if not then it's a terrible design flow wise. It's also good practice to tip/lean the pc around to help remove trapped air pockets.
Love that sea-foam green rgb on the b-roll. Amazing work.
Agreed, much nicer than the rainbow puke lol.
Super happy you're getting back into tech. You did very good on this build.
Amazing build @Bitwit
I know water cooled builds are a lot of work, but I really enjoy these builds.
Hardline tubing looks so good ,frosty hard line will look good too ,pls do upload videos more often
Beautiful hardline runs! Love that each run hits the rads before going in to cool the cpu/gpu.
Love the build, and we love you as well Kyle!
Awesome build and awesome fundraiser you and Paul do! Thanks for trying to make tomorrow better than yesterday.
Masterful job, Sir. This one turned out beautifully.
finally my dream build pc which i could never afford, anyways it's good to have the GOAT of pc building community back .
unsolicited recommendations for folks new to custom water cooling:
1. Agreed booting or maybe even installing Windows outside the case is a great start!
2. Use EK ZMT tubing or some sort of soft tubing for your first build, it’ll likely be challenging enough without having to make bends.
3. Buy some extra fittings (especially nice to have some angled 90 degree connectors in my experience)
4. Build it with maintenance and easy draining / filling in mind.
5. Use clear distilled liquid with an additive to help prevent corrosion and goop from gumming up your blocks. 5. Don’t use opaque fluid unless you’re willing to drain / cleanse / replace regularly. Even the colored translucent liquids can be hard to fully clean out.
6. Use a guide for GPU disassembly / block assembly, and take lots of pictures along the way.
Great looking build, i totally support your last minute change with the tube runs, much nicer!
Great looking PC. Good luck everyone!
glad to see this guy building a new PC.
Fantastico y elegante ensamblaje amigo mio. 🤘
Miss these builds! always do a stellar job with these!
“Just like the movies….” I love that song
Really nice pc, Kyle. It looks so clean, and those tubes are banging. Nice.
amazing tubing run ! You've always been way more original than other youtubers and this time again you're showing your unique aesthetic touch :D !
Wow, not gonna lie. This was a really fun build to watch, and the pc turned out amazing, really digging the tube runs...
I’ve seen my fair share of custom loop builds (including your pal Jay), and those are the most precise bends… well, ever. Insane! The was no luck here, just patience and talent. Great work Kyle!
Actually, very innovative tubing runs. Certainly nice to look at. Well done!
You've really outdone yourself, what a build.
Wow that's an amazing pc with great specs ❤
Gorgeous build my guy. Next one I would say to either go full workstation or sff... dealer's choice
Dude this loop is genius. I'm ordering another rad and doing this. Thanks, Kyle!
Nice and fast build. Love it!
Honestly a great way to end the day is watching one of your videos! This is a sick looking build and suuuuuper clean! One day I want to try custom water cooling!
Boy, I sure do wish I had me a fancy table like that one!
the fact that this is being given away is insane W kyle
Love the build some of us were still waiting on that dual system build with phanteks case but it’s all good. I would love to see a build in the NV9 by phanteks. Overall love the pleasing design of a hardline build
Amazing build as always!! I can't wait to see what you build next! :D
Maybe you fried a lot of pc till now, but when you are doing a custom loop you are extremely good at it!
Wow, amazing pc build. Can't believe you're giving it away! Love your work with tech and also the admirable fundraising you do for the kids. My fingers and toes are crossed - my wife has commandeered my pride and joy after I got her into PC gaming *fistpump*, so now I'm slaving to get her own. GG's everyone and good luck!
Yes, we love you Kyle.
Nice build, may have to do one myself, just waiting for the new gpu/cpu launches
What a great looking build !!!👏🏻
Air in the pump and reversible fans aside, this is a sick looking build. It would even look better with colored coolant
First time seeing one of your videos and as someone who's never built a modern PC before but thinking of doing it, I have to say it's was great fun watching it. I'd definitely love to win something like this since I couldn't afford those specs but even if not, I think you've convinced me to do as close to an all white build as I can. Thank you.
I actually like the fact that you tested all the components before assembling it all. I believe that it should be the norm when you can do it. I do know that it is not practicable when you are building a computer on your own. I agree with others that seeing you assemble things with both of your hands is safer and less hard on you although it does require someone else to help you with the video creation.
On the down side: I have become somewhat disillusioned with the giveaway since almost everyone gets less than 1% chance of winning it.
On the other side of things: I have always enjoyed your innovative way of making the video content. Sometimes it's slightly overkill but always enjoyable. I also like the fact that you do not sugar coat when things don't work the way you want it to. That's accountability at its finest!!!
Glorious, Kyle! Absolutely glorious!
Eyyyyy, Kyle is so back
This is the cleanest, gucciest build I've ever seen from you.
You know we love you, Kyle!
@KyIeHansen sure thing, ObviouslyNotOurHeroBitWitKyle!
My first corsair loop took me two days with 😢the included saw. Wish I would of saw that mini electric saw that’s really cool.
That's beautiful, well done mate
Think I found inspiration to upgrade my old fractal R4 case
Nothing but love, Kyle
Super pretty! Plz do more hardline Kyle
This is a very clean build. It's so clean, I might even leave the LEDs on Unicorn Vomit if I won it.
How challenging it could be for a pro PC builder like you to build a PC for Linux System.
The saxophone music definitely added to the sexiness of this build.
This build is magnificent
Of course I love you Kyle, after all these years and how often I watch you when you aren't looking, especially while sleeping, how can you not know that by now? Hey Kyle, did you ever do a custom water reservoir made out of the infamous beer bottle? That would make a fun build.
Love this build. How about a collaboration with Paul and Joe that includes PC building and beer
Nice to see you ack Kyle, hope you're ok. Stopped watching for a while (I remember you three channel names ago), but my PC was stolen so gave up with PC stuff.
From one Kyle to another, love ya bud.
That's the one, a hard-line pc build up and looking this God damn good, way better watch then just slapping an AIO on it and calling it a day!! Nice call on the "420" entries as well nice touch bro 👌
just for the music selection i give a thumbs up.
She is a beauty for sure. But I could never see myself building a custom loop ever! Just imagining having to troubleshoot something. Ooof
I think gettin a prebuild "custom water loop" is way to start, after you are done like 2 years with it, you practise cleaning it and swappin liquids.
I am still messing around with AIOs, just to get the feel.
Going hardline this summer. Cold rig summer.
just wondering is there suppose to be that much air in the CPU block cuz its looking toasty in there.
I'm glad im not the only one thinking this. Is it being only halfway full, normal?
great looking build, kyle!
That thing is really going to show the dust after a couple of weeks of use
Extremely clean looking build!
Hardkline water cooled builds look so incredibly good, but boy am I too intimidated to even try to build one myself
The way the outlet on the CPU looks so clean the way its like invisible straight on behind the inlet!!! I need to water cool my build. Gah lee
Jay would approve of your parallel runs.
Love the runs and everything about this build. Awesome work man.
Could you do one with milky cooling liquid and rgb fittings (there are also some rings you can put next to your fittings to do the same thing)
Absolutely top-tier work, Kyle!
This thing turned out great.
honestly the black gpu kind of goes well with it, since the mobo is all black as well. kind of ends up working IMO
Ive been saying the same thing about thier GPU waterblocks for years. Id like to see more clear sections and there needs to be a white option. Also this would be great with a verticle gpu mount
my life would be complete with this PC
Kyle this is probably the most sexiest water cool builds you have done on the channel, kudos.
10:34 - For a moment I was like "what? USB Type-A on a fan?" ... then it dawned on me that that's probably Corsair's attempt at linking fans, lol.
Love this build and that impulse decision to change that tubing awesomesauce! 😂😂
Looks so pretty, hope to win it but realistically I know I won't. I love you sir!
This build came out incredible!
Nice clean build. Someone got lucky. I'm actually building something in a case just like that. Big GPU is in the way, lol.
good to see you! a) bleed? b) drain port that high in the case? c) beautiful anyway!
WOW. SUPER CLEAN PC LOOKING LOVELY!!
sweet sweet build Bitwit , runs are awesome
Kyle. That looks amazing.
A random guy: "With the money you can't buy hapiness"
What the money can buy:
Good luck to the give away winner I hope it gets daily use!
Great Light Mode Build
If you're running a 1080p monitor is it fine to have a 7900x3D and a 3070 or 3060? I play a game that isn't GPU intensive, so I was thinking as long as the GPU exists it'd be fine.
Sick build. Congrats to the winner 😎
*sees hardline runs* "I'll be in my bunk"
That definitely is a sexy build. Although it would be great to win it, I already have 3 PC's, and hope someone who actually needs it can win it.
We love you Kyle
Stunning build, those runs look spot on
Beautiful, you have inspired me to do a similar build.