So the clutch pedal we started with was a wilwood universal clutch pedal. However, that one didn't end up working without some modification. The throw of the wilwood pedal was not enough to fully actuate the clutch before the pedal hit the floor. We ended up having to modify that pedal, and used a piece of a junkyard zj brake pedal combined with the wilwood to get enough actuation. I think we have more on that coming up in a future video. So it wasn't exactly a "direct fit" by any means.
So we started with this wilwood pedal: Wilwood 340-13834 Brake Pedal (Swing Mount Single Master Cylinder) 14.3 Inch, Black a.co/d/2aHI0xe But the angle didn't work right, so what ended up working was to chop that one down, and then affix part of a zj brake pedal in a hacked together piece. Here's a couple pics: instagram.com/p/C-31a17Pb98/?igsh=MWNtZHVnNmhqaW03cg== There are three bolts that hold the two pieces together, one at top and two on the bottom. Had to create that triangle mounting pattern to get the angle correct. It's not pretty, but it works :)
Also ended up going with the external slave cylinder on the clutch end - this video still has the internal one, but in an upcoming one I think there's more about that.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
What clutch pedal did you use
So the clutch pedal we started with was a wilwood universal clutch pedal. However, that one didn't end up working without some modification. The throw of the wilwood pedal was not enough to fully actuate the clutch before the pedal hit the floor. We ended up having to modify that pedal, and used a piece of a junkyard zj brake pedal combined with the wilwood to get enough actuation. I think we have more on that coming up in a future video. So it wasn't exactly a "direct fit" by any means.
@@idkwidgarage I’m just looking around for something that’ll work the stickshiftzj pedal I can’t find anymore
So we started with this wilwood pedal: Wilwood 340-13834 Brake Pedal (Swing Mount Single Master Cylinder) 14.3 Inch, Black a.co/d/2aHI0xe
But the angle didn't work right, so what ended up working was to chop that one down, and then affix part of a zj brake pedal in a hacked together piece.
Here's a couple pics: instagram.com/p/C-31a17Pb98/?igsh=MWNtZHVnNmhqaW03cg==
There are three bolts that hold the two pieces together, one at top and two on the bottom. Had to create that triangle mounting pattern to get the angle correct.
It's not pretty, but it works :)
Also ended up going with the external slave cylinder on the clutch end - this video still has the internal one, but in an upcoming one I think there's more about that.