2001 - 2005 Honda Civic Front Door Component Speaker Install
HTML-код
- Опубликовано: 29 июн 2024
- Parts linked in the description below!
Watch a full tutorial as a 2002 Honda Civic will have a used set of Alpine 6.5 inch SPS-610C Component Speakers installed. These speakers can be purchased online or at any local retail location. This vehicle fits any 5 1/4 or 6 1/2" speaker in the factory location.
This video applies to Honda Civic models for years 2001, 2002, 2003, 2004, and 2005. This video also includes how to remove the factory front door panels, speakers, wiring, reinstallation, and testing.
To see the rear speaker install on this civic, click here:
• 2001 - 2005 Honda Civi...
To see how to replace the radio on a Civic, click this link here:
• 2001 - 2005 Honda Civi...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts Used (Amazon Associate Paid Links):
*Alpine SPS-610C Component Speakers 6 1/2" or 6 3/4" (Pair) (Discontinued)
---Newer Version: amzn.to/3vVgA73
*Metra 72-7800 Honda Speaker wiring adapters: amzn.to/3zEnHnF
*Metra 82-3412 Speaker Bracket Adapter: amzn.to/3ycii64
Disclosure: As an Amazon Associate I earn from qualifying purchases 
Авто/Мото
![Megan Thee Stallion - Otaku Hot Girl [Official Audio]](http://i.ytimg.com/vi/USxIYOaIpig/mqdefault.jpg)
Parts linked in the description of the video!
The speaker I bought didn’t fit the part that attaches into the panel BUT managed to at least actually take off the door using this video AND connected my speaker so honestly I’m feeling good. Also I did manage to find a way to have it in place! Great video!
Do you know the actual correct size of speakers for doors? Thinking of upgrading mine. Thanks
You should note what tools are needed in the description. Just think it would help. Thx for the video though!
You did a hell of a job
This was filmed like a horror movie and I love it. Very insightful tho thanks bro
This was super helpful, thanks!
Subscribe!
Thanks for the ideas, I couldn’t figure out where I was going to mount my tweeter and your video is the only one that was helpful. Awesome job!
Thanks! Subscribe!
@@ProvoBeastAudio Again, the purpose of video is to actually see it done. It is far less effective to tell how to remove a panel, and then remove it off camera. I want to see exactly where your tool and your fingers are at the moment when the panel pops out. If the job itself takes 2 hands, then filming it takes a camera-man, tripod, or head strap to hold the camera.
Also, especially since one of my old speakers doesn't work at all, I am willing to cut that one out of its mount; but I would rather drill mounting holes in the sheet metal door than cut the factory door panel. I think I would also rather let it bulge out just a little than cut it as well. since I don't have a separate tweeter, I don't have to cut anything for that. Real antique car restorers hate cut in accessories that damage original parts.
@@alan6832 this is a civic aint no antique car restorer collecting an 01 civic lmao
hello, thanks for the video, it was very helpful, what tweeter are you brand?
Thanks a lot!
Especially for the positive/negative if you don't have three harness adaptor which I don't 🤣
Thank you very much for your help.
Awesome video
Dang that awesome video suck it was at night but very helpful I just got 6.5 for my doors 2002 civic
Hi, what diameter were the old speakers so I know what to buy?
How is the bass on the speakers?
How did you wire the tweeter to the existing harness?
What about passenger side? Speaker has a wire bundle
What is the tallest speaker I can put in there? I want to do a 2.5" cerwin Vega speaker
Does that speaker adapter fit on 03 civic doors
What is the name of the crossover name you use
What type of tweeter you used?
The stock speaker magnets on those are like the size of a quarter!
They are Neo magnets which is why they can have such a small size, but nonetheless, much needed for an upgrade.
Two questions. Does that harness work for all types of speakers? Where do I find replacement door panel clips? Thanks
Autozone
How deep is the front door speaker? Im not sure if these speakers im getting will fit..they are 3 1/4" deep
Some forums say really around 2" top mounting depth. So you may need to buy a bracket or make an MDF spacer to clear the window
Would it be okay to bypass the harness and wire the existing wires straight to my new speakers ?
Sure, thats what we did.
I wanna install my Bose sound system my 2009 Mazda 6 into my 2004 civic think it would work ??
Nope. I’d recommend going aftermarket.
"Kinda one handed here"
can you give a link to the adapter? i cant find it
How did you tighten those screws into the hold speaker holding part?
You will need to drill holes in the old speaker housing. Once those holes are cut out, then put it on the door to mark the spots you need to drill into your door. By ripping the factory speaker apart, you will lose the little clip that holds the speaker in place
Would kicker speakers work on this car too?..
Any brand works as long as they are the correct size and mounting depth.
What about the connector on the passenger side? Which color is positive and which is negative?
Red/green is positive, brown/black is negative. The harness adapter I used also fits the other side too.
+Provo Beast Audio Installation the ones in my car (honda civic 2003 passenger side) are light blue and green and black, it's just that I kept getting a miswiring message on my stereo screen. but now I have another problem, my passenger window won't work at all, I wonder if it has anything to do with one of the wires from the stereo/speaker
Your Window regulator is completely independent of your stereo system. Most likely you have a loose harness when you put the door panel back on. To best discover what is + and what is -, hook the old speaker up to a battery and if it pops outwards, you know you have the polarity right, if it pops inwards, switch the polarity. That will show you how it was hooked up before, allowing you to copy that for your new speakers.
The passenger side speaker wires are as follows
Light blue - NEGATIVE
Green/black stripe - POSITIVE
Will the speakers you used fit a 1998 Honda prelude SH? I'm curious because I literally had those speakers in my shopping cart on Amazon before watching this video so if you could help me that would be great!
Yes,
Front: 6-1/2"
Rear: 6" x 9"
Front door: 6-1/2"
Rear deck: 6" x 9"
Thanks!
+Provo Beast Audio Installation thank you! And sorry I have another question. In my car the rear speakers are on the rear deck and I was wondering if those harnesses would work for the back as it would in the front?
Yes, they should
What type of crossover and tweeter did u use?
SPS-610C components
So I did this and my dash lights stopped working
Why does my door panel vibrate after I installed the new speakers
There’s just something rattling so figure out what’s rattling and either tighten it more or add foam padding
How big were the speakers?
6.5". See the description of the video.
What's the name of the drill u have
At the time of the video, we were using a Black & Decker 20v cordless drill with a 2" hold saw.
How did you get the after market speaker to stay inside the old speakers bracket?
Screwed it on with the screws that cine with the speaker
Same question, this reply doesn’t make sense. There’s no place for the screws to attach.
he screwed the speaker to the bracket and then screwed the bracket to the door for extra security
Y don't show the people that how do pull that out
But why is the door cloth in mine falling out too🤣
What about the right side? What colors mean what?
Left Front Speaker Positive Wire (+): Blue/Green
Left Front Speaker Negative Wire (-): Gray/Black
Right Front Speaker Positive Wire (+): Red/Green
Right Front Speaker Negative Wire (-): Brown/Black
Front left negative is grey/red
Front left positive is green/yellow
Front right negative is green/black
Front right positive is light blue
This is for 2004 Honda Civic. Not sure where they got those other colours from
hi where to connect the wires from the tweeters? you didn't show
The tweeters connect into the midrage woofers in the doors. @ 6:11 shows the tweeter wire connected to the midrage woofer, @ 6:17 shows the input also connected to the midrage from the radio. The crossover was connected attached @ 5:31 which connects directly to the tweeter.
you connet it with the same speaker you have
How did you cut the mount out
We just used a pair of flush-cuts and cut the brackets to the size we needed.
Provo Beast Audio Installation hey man I used to work with you at Clearlink. Name is "Dusty" do you remember me?
Never worked at clearlink..
Provo Beast Audio Installation lol my bad the pic of the guy on the videos looks exact like a guy I worked with at Clearlink or Discover. One of the two companies haha
Thx for the vid. Dude,.. tripod. Get one. Thx.
Woah, this is super old content. Apparently you haven't seen what we actually produce today...
Will that work for a 2002 lx the speakers I got are boss 6.5 rage
Exact same process
will 6.75 work also?
Yep!
Passenger speaker wires
Light blue is NEGATIVE
Green/Black is POSITIVE
Driver speaker wires
Grey/Red is NEGATIVE
Green/yellow is POSTIVE
Thank you so much. I can't seem to find a clarification on this anywhere else.
Now, where’s the right side? 😅
It would be just a mirror image. Same install.
@@ProvoBeastAudio I just had to figure out the tab for the other window button that wasn't quite as easy to get to get the door panel off as it had come off. Thaks for the video, it really was helpful!
What’s the size of the door speakers? Cheers
How many 6.5" speakers should I buy for this car
The front doors are 6.5" but the rear speakers are in the rear deck by the window and they are 6x9". If you want to put 6.5" in the rear deck, you will need 6x9-to-6.5" speaker ring adapters.
What brand are the twweter?
@@ProvoBeastAudio rear deck is 6.5 max on sedans. Coupe is 6x9