Kirei English PV（DON

↓Product Detail↓
sugihan.com/ne...
↓Purchase Here↓
sugihan.com/pr...
↓Handling Stores↓
sugihan.com/ha...
◇Available at major electronics retailers including Yodobashi Camera
and also at home improvement centers
■Non-electric, compatible with unit baths bidet toilet seats
→ Registered with the Patent Office
→ Easy installation by hand tightening (SG-001)
→ Can be easily replaced by hand even in case of disaster
→ Can be used in case of disaster if water supply is available
→ Can be used worldwide (requires a shut-off valve and water pressure)
【Recommended Environments】
■Toilet environments without power supply
・Toilet-bath integrated unit baths
・Apartments for single living, old condominiums, etc.
・For use overseas
→ Great for use as equipment or souvenirs when overseas on assignments, transfers, or studying abroad!
【Included Parts】※ Installation tools are not included
・Kirei main unit × 1 (metal water supply port)
・Toilet seat mounting position alignment sheet × 1
・Toilet seat mounting bolts × 2
・Adjustment washers × 2
・Anchor plugs × 2
・Nuts × 2
・Toilet seat mounting plate × 1
・Plastic branch rope × 1
・Plastic water supply hose 50cm × 1
・Instruction manual × 1
【Product Details】
・Buttock water flow rate: 0.35-1.8L/min
・Bidet water flow rate: 0.35-1.8L/min
・Check valve: Vacuum breaker
・Water supply method: Direct connection to water supply
・Water pressure range
Static pressure: 0.07-0.8 MPa, Dynamic pressure: above 0.03MPa
・Size: 370X500X60mm
【Notes】
・Not compatible with warm water and warm seat functions (due to lack of power supply)
・Not suitable for use in places where freezing is possible
・Must be able to open and close shut-off valves by yourself
・Base plate mounting hole spacing requires 140mm or more
・Distance from mounting hole to flush tank must be 45mm or more
・When installing SG-001, always tighten by hand
・When installing SG-002, use tools