Cool project, these trucks are the best little drift trucks, so much fun. I'd put that air noodle-thingy back on the intake though. Something about timing the intake pulses, somebody smarter than me told me off about it 😅 also allows for cooler air coming in Peace man, best of luck with the build ✌
That was a great how to video that truck needs to be lowered too I'll have to show you I'll put a video out of how low my truck is soon keep up the great videos
Hey Angel, Definitely working on getting more out, but priorities must be taken care of before hobbies, so in time I’ll be getting them out. Thank you for watching. 🤙🏽
Hoi! This is actually my cousins truck. He installed a 276 from Schneider Cams in San Diego and Doug Throley headers back then. You can reach him on Instagram @nismo.matt for more info. If money and state regulations are not an problem though, I’d suggest a 300 cam with the mechanical rocker arms from o&j performance. Once you do that, might need to upgrade fuel, tune, spark, etc. to run better. 93 hardbody was my first truck and I beat a bunch of Toyotas back then haha. To be fair I lost a few times to, mostly from other Nissans and Toyotas that were more set up than mine. Hope this helps.🤙🏽
Try this schneidercams.com/nissanka24-e.aspx. Hopefully it takes you to the cams on the website. If not, look up Schneider Racing Cams and you should be able to find a cam their. Hope this helps.🤙🏽
Hi from Australia. I swear my U12 Pintara has a 272 cam, I remember that number from years ago (I could be wrong tho). Any idea what the 240sx you guys have over there comes with?
@@guahangarage I eventually found some spec for the 240sx and hardbody you guys have www.ka-t.org/forums/viewtopic.php?t=5223 but couldn't find anything for the Pintara, though it has the same head as the 240sx with the 40F stamped on it, so I can only assume it would have the same cam as the 240sx.
Definitely will work on trying to balance the background music. I only put it on the video to avoid copy right crap on RUclips because I listen to music when I work. According to there rules, I can get flagged for having someone’s song in my video without the owners permission. Definitely trying to stay under RUclips’s radar 😂
Yo keep messing with that hardbody I’m keen on content 🤙
I just received this same cam from Schneiders. Excited to install it. For a '72 510 with weber 38 on that crazy truck plenum.
Badass vid helped me out a lot keep up the good work just getting into the game so slowly but surely 671 all day
god i wanna see and hear that truck pulling
Cool project, these trucks are the best little drift trucks, so much fun. I'd put that air noodle-thingy back on the intake though. Something about timing the intake pulses, somebody smarter than me told me off about it 😅 also allows for cooler air coming in
Peace man, best of luck with the build ✌
That was a great how to video that truck needs to be lowered too I'll have to show you I'll put a video out of how low my truck is soon keep up the great videos
Thanks! Let me know and I’ll check it out.
Man, I was having so much trouble removing the goddamn cam sprocket on my 240
Just subscribed
Can we get a update vid on the cammed hardbody?
I'm running the OJ stage 1 on my truck with a pacesetter header. Need to hook up my tail pipe.
did it require milling and was it drop in?
i just bought it, hows it doin for ya?
where did you get the header and i took the top of the engine apart and i now understand about the lifters
Would like to see more videos on your truck
Hey Angel,
Definitely working on getting more out, but priorities must be taken care of before hobbies, so in time I’ll be getting them out. Thank you for watching. 🤙🏽
Thank
How much performance gain did you notice after this mod? Also how much did the cam cost? Wanna do this to my hardbody!!!
@@guahangarage Hell yea thanks a lot! I'll be back if I got a question or to update y'all on my build!!!
Hi Guáhan Garage, will it pass CA emissions?
Hey prim what kind of camshaft and headers are you running?? I have a 93 hardbody and I wanna change some stuff and this caught my eyes…
Hoi! This is actually my cousins truck. He installed a 276 from Schneider Cams in San Diego and Doug Throley headers back then. You can reach him on Instagram @nismo.matt for more info. If money and state regulations are not an problem though, I’d suggest a 300 cam with the mechanical rocker arms from o&j performance. Once you do that, might need to upgrade fuel, tune, spark, etc. to run better. 93 hardbody was my first truck and I beat a bunch of Toyotas back then haha. To be fair I lost a few times to, mostly from other Nissans and Toyotas that were more set up than mine. Hope this helps.🤙🏽
I just installed a 266 Schneider in my ka24e hardbody, and was wondering if you would know how to get rid of the lifter noise ?
Link for the cams?
Do you have a link to the camshaft looking to get one for my self🙏🏽
Try this schneidercams.com/nissanka24-e.aspx. Hopefully it takes you to the cams on the website. If not, look up Schneider Racing Cams and you should be able to find a cam their. Hope this helps.🤙🏽
Did you have to realign the cam the same way the old one came out?
We set everything TDC I believe and then took it off. Installed the new cam in the same position the other can was in. Hope this helps.
What kind of difference did you feel in the truck?
Better response and mor mid- top end pull. Not a drastic change, but you can definitely notice the difference.
Is a cammed hardbody practical for daily driving or will my oil pump hate having to catch up with my rpms on cold start ?
Cam wont make much Difference from Stock. these Engines perform best stock or straight up Boosted or tuned. That’s the only way to see potential
@@curtfox91 that isn't true.
did the timing chain gear only fit the cam 1 way?
What is the RPM Range for this Cam?
2200-6000?
Will a 284 Lift Dual pattern
485-485 Lift fit my hardbody?
Did you haft to tune or anything for just the cam swap
No need to tune. Probably could tune it to get more out of the it, but we never tried.
Why was the cam cap torque specs and
What about the piston and the camshaft, which stage
Do u have a link on getting the cam you got?
schneidercams.com/hydraulicfollercamshafts.aspx
Will this work on a 1986 z24?
Hi from Australia. I swear my U12 Pintara has a 272 cam, I remember that number from years ago (I could be wrong tho). Any idea what the 240sx you guys have over there comes with?
@@guahangarage I eventually found some spec for the 240sx and hardbody you guys have www.ka-t.org/forums/viewtopic.php?t=5223 but couldn't find anything for the Pintara, though it has the same head as the 240sx with the 40F stamped on it, so I can only assume it would have the same cam as the 240sx.
are these cams drop in?
You get it tuned after?
No tune. I personally never tuned a truck for cam. Let me know how it is if you tune it after.🤙🏽
did you have to upgrade the lifters or was this goods to run on a stock motor?
@@guahangarage I’m gonna be turboing my truck soon, is the lift on this cam too aggressive for a 7pound build? Just wondering if you knew
@@guahangarage good to know buddy! Thanks for the info and get those bills paid so we can both get our builds finished!
Pon video prendida ver como se escucha
He want a running video!
I need how run 1/8
@@guahangarage Translation: Do a live video with engine on to hear the sound of it
Can’t hear it because of the music
Definitely will work on trying to balance the background music. I only put it on the video to avoid copy right crap on RUclips because I listen to music when I work. According to there rules, I can get flagged for having someone’s song in my video without the owners permission. Definitely trying to stay under RUclips’s radar 😂
Lose the music