YFZ450R Clutch Rebuild | Clutch Replacement | Partzilla.com
HTML-код
- Опубликовано: 27 авг 2024
- Buy a YFZ450R clutch rebuild kit: bit.ly/YFZ450R-...
Or
Take a look at all of the parts we used to rebuild our Yamaha YFZ450R clutch: bit.ly/YFZ450R-...
Learn how to replace the clutch Yamaha YFZ450R. Above are two links. The top link will lead you to a clutch rebuild kit for your Yamaha YFZ450R. On our Yamaha ATV though, we did a little more work, and we needed more parts. So that second link shows you all of the parts to do the entire job we did on our YFZ450R. A note about buying the clutch plates individually: pay special attention to the quantity needed to do the job. You’ll need these three clutch plates in these quantities:
Friction plate 5VY-16321-00-00 (x6):
www.partzilla....
Friction plate 5TA-16321-00-00 (x2):
www.partzilla....
Clutch plate 4X7-16325-00-00 (x7):
www.partzilla....
We’ll start by draining the oil and soaking our new clutch plates in oil while we take everything apart. Then, we’ll remove the clutch on our YFZ450R. When we opened up the clutch, we saw some wear on the inside of the clutch basket. So we’re going to replace the clutch basket on our Yamaha ATV before we replace the clutch plates. John will show you how to get the clutch plates out, remove and then replace the clutch basket on a YFZ450R, and then replace the clutch plates and clutch springs. We’ll then close it back up and refill our engine with oil.
Need to replace the clutch cable on your YFZ450R? Here’s how:
• Yamaha ATV Clutch Adju...
Read how to do this job step-by-step here: www.partzilla....
VIDEO HIGHLIGHTS:
Draining the oil - 1:20
Prepping clutch plates - 3:15
Removing the clutch cover - 4:05
Removing the clutch basket - 3:30
Installing the new clutch basket - 7:30
Installing the clutch plates - 9:30
Closing the clutch cover - 11:00
Find thousands of Yamaha ATV parts here: www.partzilla....
Talk to us:
Twitter: / partzilla
Facebook: / partzilla
Instagram: / partzilla
In the video we’re working with a 2009 Yamaha YFZ450R, but you may have similar steps for your Yamaha ATV. If you’re not sure whether these steps apply to your machine, leave a comment and we’ll get back to you.
RELATED CONTENT:
Yamaha YFZ450R Charging Problems:
• Yamaha ATV Electrical ...
Yamaha YFZ450R oil change:
• YFZ450R Oil Change | P... Авто/Мото
John can you make a video about replacing a shifter shaft on a Yamaha raptor 660yfm 2004 please?
I would love if you Dan make one for a slipper model!! I’m having an issue where I changed the basket. So hard to pull. Not sure what I did wrong
Replacing my entire clutch as I type this. I have been playing with the clutch basket and getting it to sit all the way in the gear and I’m positive it is. When you slide the boss on, are the teeth suppose to slightly hang over the center piece there? I can’t get mine to sit even, but I feel confident I have the basket all the way in.
I did everything you said still won’t engage clutch I guess it’s the rod and ball in the clutch I have brand new clutch Hinson and cable ??
I have an 05 Raptor 350. When I shift into any gear the quad still thinks it in Neutral. I can rev it all day but it doesn't move. The light indicator shows its no longer in neutral, there's no issues with the clutch cable tension. I believe it is a clutch issue. Based on your experience and the info I have, does this sound like a reasonable assumption?
I want to remove the clutch cover to get it powder coated. Do I need to drain oil? Or can I just screw it off, and leave it like that for a couple days?
Hello i just replaced my clutch basket into hinson basket and now it still not engage and disengage can you help please thank you.
is there a pushrod adjustment ? before you adjust cable slack?
I have an ‘08 yfz450 yesterday we were riding on the dunes was climbing a hill in 3rd gear started to bawg down... down shifted to 2nd same thing then it stopped moving. Turned it off then back on I could feel it go into gear let go of clutch but doesn’t move as I switch gears does the same thing but revs up. Any idea what could be wrong???
Since the clutch plates were fine, could a person reuse them? Or is it better to just use all new parts?
If you are replacing one set, you should replace all of it together.
I ordered all my clutch parts from you but didn't get a clutch boss holder tool, is there any other way of getting it to not move? Like the quad being in gear or something?🙄
Very good
Mine has silver specs in the oil filter every time I replace it
What size is the huge bolt holding the clutch boss in the basket? I have a 2017 yfz450r would it be the same size?
Dear partzilla I have a yzf450 and I am not sure of the correct year as I want to purchase and fit a clutch kit and don't want to purchase the wrong 1 can u help???
Dear John,
As always , all details taken care :)
When does one change oil without changing oil filter ?
Is filter change required for alternate oil changes or it is something decided based on observation from the drained oil.
I just change filter and oil together. No reason not to.
Did he even put new crush washers on? Because your supposed replace em
Not all little things make the edit. Yes, replace them.
Is changing the clutch on the raptor 700 the same way
Raul Mendez Yes i did a yz 450f clutch pack. Comes with 9 disks just replace 1st with a full clutch pack.
@@josephfreeman1427 ok cool I was just asking because I might have to change the clutch on my 700 raptor and I wanted to use this video as a reference
Raul Mendez I'm pretty sure they're the same setup don't quote me on that you might want to do a little more research online before you go that far
Will all parts in link fit 2019?
Is the clutch boss supposed to spin freely when in neutral? Becuase mine does for a couple of turns then locks up
Yes, that's normal.
Ok even if it makes a rattling noise when running?
Then you might have another issue.
I have a 2012 and my clutch is real lose it want go it to gear wat could be the problem
check your cable and make sure it's adjusted. If it's loose at the clutch itself, then you'll need to inspect the clutch
Partzilla brand new clutch cable and clutch rod. I think the clutch have to much free play to let it engage
@@PartzillaParts if I have mine in gear with the clute in and the tiers are still locked up do u think I need a new clute
I have a Chinese 4-wheeler and I live in Spruce Hill Lane I have a Chinese 4-wheeler needs to get fixed
Español porfa 😎