Sorry to be off topic but does anyone know a trick to log back into an Instagram account..? I was dumb lost my login password. I love any tricks you can offer me
@Ryland Ira Thanks so much for your reply. I found the site thru google and I'm in the hacking process atm. Takes a while so I will reply here later with my results.
Thanks, I gave a quick watch instead of that honey-do crap im suppose to be doing...i gotta do this in the next few days, i'm ordering that Tusk Axle Bearing Carrier, do you happen to have the o-ring part numbers laying around somewhere? Thanks either way...
The part numbers we used in this video were (2) 1S3-23147-01-00, (1) 93210-66001-00, and (1) 93210-71001-00. However, you will want to check the OEM parts finder for your specific ATV. You can find the OEM parts finder here and these O-rings are under the Rear Arm schemcatic: www.rockymountainatvmc.com/oem-parts/Yamaha
I'm about to tackle this job it seems straightforward, my question is does the carrier bearing you provided in your link come loaded with the components and necessary O rings?
They do not I have them a call and just like Yamaha all the parts are separate and it looks like you have to press them bearing on the carrier unless you get it from somewhere else
Yamaha doesn't list the O-ring sizes but here are the quantities and part numbers for the O-rings we used on this machine: (2) 1S3-23147-01-00, (1) 93210-71001-00 and (1) 93210-66001-00. These can all be located in the OEM parts finder here: www.rockymountainatvmc.com/oem-parts/Yamaha
I believe we used either Maxima Hi-Temp Waterproof Grease or Bel-Ray Water Proof Grease. Maxima: www.rockymountainatvmc.com/parts/maxima-hi-temp-waterproof-grease-p Bel-Ray: www.rockymountainatvmc.com/parts/bel-ray-water-proof-grease-p
why is the sleeve inside the carrier seem so loose in there and should the greese help that sleeve being so sloppy and loose inside there ??
Do I sense a YFZ project coming??? Loving the sport quad videos!
Sorry to be off topic but does anyone know a trick to log back into an Instagram account..?
I was dumb lost my login password. I love any tricks you can offer me
@Rayden Bryson instablaster ;)
@Ryland Ira Thanks so much for your reply. I found the site thru google and I'm in the hacking process atm.
Takes a while so I will reply here later with my results.
@Ryland Ira It worked and I finally got access to my account again. I'm so happy!
Thanks so much you saved my ass!
@Rayden Bryson Happy to help xD
Good job Amigo 🫡🫡🫡
I’m hoping the same process for raptor 700r
U show the rotor coming off like nothing. The only damn part I’m stuck on mine will not come off
Mine too, did you solve??
@@Tiago.Ferreira.191hey, I got a punch and hit it on the rotor housing. Rotate to each side every 3-5 hits
Thanks, I gave a quick watch instead of that honey-do crap im suppose to be doing...i gotta do this in the next few days, i'm ordering that Tusk Axle Bearing Carrier, do you happen to have the o-ring part numbers laying around somewhere? Thanks either way...
The part numbers we used in this video were (2) 1S3-23147-01-00, (1) 93210-66001-00, and (1) 93210-71001-00. However, you will want to check the OEM parts finder for your specific ATV. You can find the OEM parts finder here and these O-rings are under the Rear Arm schemcatic: www.rockymountainatvmc.com/oem-parts/Yamaha
@@rmatvmc { checked, those are the ones i need, thanks again.
What size is the Hub bolt on the axle?
What year was the bike they worked on?
Excuse me, what size socket did you use to remove the castle nut where the tire goes?
The castle nut on this quad was a 24mm.
What is the part # for a 2017 yfz450r se and does this come with all the o rings????
THE C-CLIP/SNAP RING DOES NOT FIT WITH THE TUSK CARRIOR…WHY? IT DOES NOT PUSH THROUGH THE SWING ARM ENOUGH
Amigo el remplazo es igual para la yfz 450 año 2006
Does anyone know the name of ghe coller thag the seal ride on at 8:57
When u put the last two o rings do sit over the collar or between the brake rotor and collar
Hey man did you figure out what the collar was or part I can't seem to find it
What type and size of those little bolts on the axel nut?? The ones you undo before removing axel nut
I think they were a 3mm Allen. -Charles
I'm about to tackle this job it seems straightforward, my question is does the carrier bearing you provided in your link come loaded with the components and necessary O rings?
Did they answer you back...
@@joemichie4865 nope
What kind of grease do I use for this job
They do not I have them a call and just like Yamaha all the parts are separate and it looks like you have to press them bearing on the carrier unless you get it from somewhere else
use your parking brake
What size are the O rings being used?
Yamaha doesn't list the O-ring sizes but here are the quantities and part numbers for the O-rings we used on this machine: (2) 1S3-23147-01-00, (1) 93210-71001-00 and (1) 93210-66001-00. These can all be located in the OEM parts finder here: www.rockymountainatvmc.com/oem-parts/Yamaha
What is that @ 9:00 called
What grease it’s being used ?
I believe we used either Maxima Hi-Temp Waterproof Grease or Bel-Ray Water Proof Grease.
Maxima: www.rockymountainatvmc.com/parts/maxima-hi-temp-waterproof-grease-p
Bel-Ray: www.rockymountainatvmc.com/parts/bel-ray-water-proof-grease-p
Anyone have a part number for collar @ 13:06...? Please! Lol
Did you find this out
I need this part number as well