Looks good, should of did the upper control arm upgrade while you were there. Those ball joints will be hating life. They weren't made to handle that angle.
Every shop that I have gone to wanna charge me over 1K to install the level kit!?! I was like wth why so much?? What they said made no sense. Is there anyway you can explain?
Wait, he said “Left side alignment was off pretty bad” when he had computer print out. Then he said later in video that it was a waste of $90 and alignment wasn’t that bad
Is the front leveling kit all you have installed? If so does it look leveled or should I buy something for the back end as well? Debating on just doing the front or not, TIA!
Looks Great! Would like to do what you did on my 2019 Ram 1500. Want to make sure fits in my garage. Can you please tell me what the overall height of your truck is to the top of the shark fin antenna on top of cab is? Or do you remember total height in inches it added compared to the stock truck? I’m guessing 4.5 inches lift + tires?
I went with the 2 inch on my rebel. Kinda disappointed and wish I went with the 2.5, still sits quite a bit Lower in the front but it’ll be better since I won’t be nose high with a light load in the back
Looks amazing! Just did a Bilstein shock 2" level on my 20 Laramie. Need an alignment now... did you follow the factory specs for your alignment after the level?
Hey bud did you change your upper control arms ? And did you have any issues? Like angle being all goofy or wear etc i dont want to mess up my suspension you know. But i keep seeing people saying if you level it you gotta change the ucas etc and what size tired you put on .?
Hi! Can you tell me the brand and size of your tires? It’s look great with the OEM wheels. How much they charge you to install the Level kit? And what the brand of your 2” spacers? Congratulations!
Just purchased a 2021 rebel 4 x 4 . dealer is saying that the block lifts are not recommended for this truck and they cause front end damage if used.. THe tech is recommending the bds lift kit for $3200 installed..
I haven't had any problems with my leveling blocks.. I have had them on 4 trucks now. No issues.. If you don't want to lift the truck more than 2.5" then don't buy that BDS lift. If you want the truck lifted 6" than the BDS lift is a great choice. I just wanted the leveled look, so that is why I went with these..
Hey man, great videos. Quick question, I have a 2020 ram I put the same 2.5” lift and rebel tires/rims… I have not had an alignment but have noticed a serious whining noise from the front end at 50mph…. What do you think?
I own a 2019 Ram 1500 Big Horn 4x4. I purchased a set of BF Goodrich ko2 all terrain 275/65 18 tires, I also am installing 2” spacers. Do you think I will have rubbing issues and need to install a leveling kit?
i just got a 2021 ram laramie night edition. same color and everything. i need to get some bigger tires though. Question: if you add a leveling kit does it take away from the smooth feeling ride that all new vehicles have?
I watched your video and got this setup, minus the spacers. I went with Nitto Terra Grappler G2 295 60R20. Do you have any issues at cruising highway speed or power issues?
Hi I just put thus same kit on a 2021 ram 1500 big horn and I'm having some noise issues in the front end intermittently. All torques have been triple checked any suggestions ? Also have experienced anything similar?
Hey, I recognize that truck. Thanks for helping me with my leveling kit decision with this video! Wonder if the kit will work on the Warlock Classic or Rebel?
Just put these on, thanks for the video. For some reason, at the tail end of turning left or right the spring(of that side) compresses and my front end noticeably dips about a half inch...any clue what could be causing that?
Nice looking truck! I have the exact same truck, white with night edition. I added rough country 2" strut leveling kit which replaced the front struts with longer ones. Still rides like factory
awesome truck! but would be any issues if this is done in a rebel since it goes aeromode above 60 m/hr because it has air suspension or do the sensors need to be chip?
@@DOOWORKPRODUCTIONS okay thanks for replying back I'll keep that in mind, I was thinking of putting 1.25-in spacers on mine and keeping my stock wheels
What’s your opinion on 35”s with a 2.5 level? I was set on 35”s for mine as everyone told me 33”s would look too small, but yours look badass. 35”s too big?
Can I get a 1 inch level spacer for the rear suspension only? I have motofab 2.5 on front and the front looks higher! I have a 2019 Ram Bighorn sport 4X4. TY. Nice Ram
Does it ride the same as oem? or did it change the ride quality? want this on my 2020 limited longhorn but unsure if it will change the ride dramatically since I already have the stock 22”s.
@@DOOWORKPRODUCTIONS I’m doing the 2” not the 2.5” so you think maybe it’ll be less taken away from ride quality or the same. I’m just guessing the higher you lift the rougher the ride.
Just purchased a 2019 Ram 1500 2wd new body style and I plan to put on a 2.5 front leveling kit with 35x12.5 tires on 18x9 wheels! Does anyone have any knowledge as to of this would cause any rubbing? If so what can be done to combat that issue? Also, will I absolutely need to purchase to control arms? And why? (First time truck buyer & first time dealing with large wheels/tires and any type of leveling kit)
love your vids i have the same truck dam near jus curious how did you get white with blacked out girl i have the blck insert but the bezel parts are white
I did the same level kit and 4 shops can’t get the alignment on my 2021 Laramie any advice I don’t want my 33” nitto getting mangled with the wheel pulling to the right
I have the same problem. Can't find an alignment shop to make it 100% right. It amazes me that these Hunter Alignment Racks don't have updated software to align these new trucks...
My only option was to order rough country’s 3.5 lift kit which cost 1100$ that includes the struts and shocks instead of the puck spacer. I heard the reason why we can’t get the trucks aligned is because of the control arms being to out of wack and the new heavy duty control arms will sit flat and not throw off the geometry. With the 2.5 motofab the control arm is at max angle
Will never use a puck spacer again.....adjustable coilover is way to go....more money but you'll end up there eventually anyways so....actually be cheaper to do it the first time
Question, instead of the 2" spacers, could you just go with like 285/55/20 or 285 50/20? Would that give you that same amount of tire outside the fender well?
Looks good, should of did the upper control arm upgrade while you were there. Those ball joints will be hating life. They weren't made to handle that angle.
Thanks!!!
right!
Every shop that I have gone to wanna charge me over 1K to install the level kit!?! I was like wth why so much?? What they said made no sense. Is there anyway you can explain?
Wait, he said “Left side alignment was off pretty bad” when he had computer print out. Then he said later in video that it was a waste of $90 and alignment wasn’t that bad
He also said in the beginning of the video he's run a bunch of their leveling kits then later on he says this is his second kit. Haha!
im new to the truck world, just got my self a 2022 1500 bighorn, do you only need front leveling kit? or all around?
Quick question I’m about to do the same exact leveling kit and tires … are these tires pretty noisy or they decent ?
Is the front leveling kit all you have installed? If so does it look leveled or should I buy something for the back end as well? Debating on just doing the front or not, TIA!
Yes, just a 2.5" level in the front.. Nothing in the rear. Sits perfectly level.
Looks Great! Would like to do what you did on my 2019 Ram 1500. Want to make sure fits in my garage. Can you please tell me what the overall height of your truck is to the top of the shark fin antenna on top of cab is? Or do you remember total height in inches it added compared to the stock truck? I’m guessing 4.5 inches lift + tires?
I went with the 2 inch on my rebel. Kinda disappointed and wish I went with the 2.5, still sits quite a bit Lower in the front but it’ll be better since I won’t be nose high with a light load in the back
Looks amazing! Just did a Bilstein shock 2" level on my 20 Laramie. Need an alignment now... did you follow the factory specs for your alignment after the level?
Yessir
With the 2” shock kit is the control arm still on that kind of angle?
Hey bud did you change your upper control arms ? And did you have any issues? Like angle being all goofy or wear etc i dont want to mess up my suspension you know. But i keep seeing people saying if you level it you gotta change the ucas etc and what size tired you put on .?
Hi! Can you tell me the brand and size of your tires? It’s look great with the OEM wheels. How much they charge you to install the Level kit? And what the brand of your 2” spacers? Congratulations!
watch the video to find out
Hope that truck never leaves the pavement. With those she’ll offsets you will have rock chips all down the side of your truck.
😂😂😂
Just purchased a 2021 rebel 4 x 4 . dealer is saying that the block lifts are not recommended for this truck and they cause front end damage if used.. THe tech is recommending the bds lift kit for $3200 installed..
I haven't had any problems with my leveling blocks.. I have had them on 4 trucks now. No issues.. If you don't want to lift the truck more than 2.5" then don't buy that BDS lift. If you want the truck lifted 6" than the BDS lift is a great choice. I just wanted the leveled look, so that is why I went with these..
I would like to do the same to my truck, but ? Have u had any issues with it...upper/lower ball joint, brake line ect?
Nope - no issues at all
Hey man, great videos. Quick question, I have a 2020 ram I put the same 2.5” lift and rebel tires/rims… I have not had an alignment but have noticed a serious whining noise from the front end at 50mph…. What do you think?
That's weird, I have never experienced that with mine.
I own a 2019 Ram 1500 Big Horn 4x4. I purchased a set of BF Goodrich ko2 all terrain 275/65 18 tires, I also am installing 2” spacers. Do you think I will have rubbing issues and need to install a leveling kit?
So all you did was put the lift on the front?
Yes..
Did you adjust your headlights after installing the kit or no? I feel like taking the rake out of the truck would possibly blind people
They didn’t have a problem with you having wheel spacers on the truck?
Nope!
Do you need new control arms with the 2.5 or is it fine with the stocks ones? Also how does it ride off-road?
I put readylift tubular control arms on mine. They cover from 2 to 4 inch es of lift.
@@jeremysylvia3237 link to arm’s
Not sure I'll buy a 2.5" kit but it's nice to see a video with a clean truck instead of hearing someone say "I shoulda cleaned the truck first"
Was the alignment issue because of the spacers or lift kit?
Because of the leveling kit..
Do you still have this truck and the kit and have you had any issues after 2 years
2.5 in front and 1.5 in back I got round country still not put them in but struts come pre lifted 2.5 think it like the same
Hey i just bought a 2022 Ram 1500 lerami night edition will it fit on i want to go with 3” how much did you raise the rear ?
I didn't raise the rear at all..
I have a 2019 ram 1500 crew cab rwd will those fit on my truck?
i just got a 2021 ram laramie night edition. same color and everything. i need to get some bigger tires though. Question: if you add a leveling kit does it take away from the smooth feeling ride that all new vehicles have?
Yes..
Those ball joints will fail when you off-road FYI.
Is there a big ride quality difference with the leveling spacers? Thinking about installing some.
Just curios on why you didn’t go with a full strut lift? In theory they’re not much money with the overall price of our toys.
I watched your video and got this setup, minus the spacers. I went with Nitto Terra Grappler G2 295 60R20. Do you have any issues at cruising highway speed or power issues?
Do you know what the biggest tire one could run with without rubbing?
37s
Are those 20 in rims? Tires and size??
What size wheels are u running. Looks sharp. I have a 2020 rebel with stock 18s with 2.5" level kit. Looking to go bigger tires that won't rub
Any problem towing heavy with them wheel spacers?
Negative.
How’s it run 20k miles later?
What tires and size ? Are these wheels spaced out ? If so what are they
Hi I just put thus same kit on a 2021 ram 1500 big horn and I'm having some noise issues in the front end intermittently. All torques have been triple checked any suggestions ? Also have experienced anything similar?
Hmm.. Not sure what it could be. I had a squeak noise on my '19, but nothing on my '20.
Installed 2.5” leveling kit on my ram 1500. After installation it’s making a clicking noise On some bumps. Any idea what’s wrong or is it normal?
Make sure everything it tight especially your UCA bolts.
I'm running ReadyLift uca's, no problem here. RL makes uca's for 2" - 4" kits. That what I have!
Hey, I recognize that truck. Thanks for helping me with my leveling kit decision with this video! Wonder if the kit will work on the Warlock Classic or Rebel?
It will work on both of those trucks as long as they are a 4X4 and don't have the air suspension..
Did these wheels come with the truck or did you purchase them from an older Ram?
They came on the truck..
Just put these on, thanks for the video. For some reason, at the tail end of turning left or right the spring(of that side) compresses and my front end noticeably dips about a half inch...any clue what could be causing that?
Nice looking truck! I have the exact same truck, white with night edition. I added rough country 2" strut leveling kit which replaced the front struts with longer ones. Still rides like factory
Now they have leveing struts
what size tire do you run with that? and did the 2" level it completely? I have the 22 in white and I'm looking at getting that same level kit.
awesome truck! but would be any issues if this is done in a rebel since it goes aeromode above 60 m/hr because it has air suspension or do the sensors need to be chip?
Do you have to change the upper control arms?
Do you have a link to 2.5 spacers you bought?
Sarcasm obv 👌
Do the wheel spacers cause any issues?
Truck looks great bud i was just wondering about those two inch spacers did you feel any difference in the truck feeling heavier
The truck rides a little stiffer than stock but thats it.
@@DOOWORKPRODUCTIONS okay thanks for replying back I'll keep that in mind, I was thinking of putting 1.25-in spacers on mine and keeping my stock wheels
Does it effect the smoothness of the ride when installed. Like it even slightly
Slightly rougher ride yes.
What’s your opinion on 35”s with a 2.5 level? I was set on 35”s for mine as everyone told me 33”s would look too small, but yours look badass. 35”s too big?
You will rub with 35's on a 2.5" level..
I bought this kit did you ever need to replace upper control arms
I replaced mine. Readylift uca's 2-4" applications.👍
Do you have to do anything to back wheels ...?
Do you have air suspension?
Great looking truck! I’m guessing that’s 5% tint on the truck? Also, what percentage did you do windshield?
5% all around and 35% on the windshield..
Can I get a 1 inch level spacer for the rear suspension only? I have motofab 2.5 on front and the front looks higher! I have a 2019 Ram Bighorn sport 4X4. TY. Nice Ram
That I'm Not sure of..
What size tired are you running?
Does it ride the same as oem? or did it change the ride quality? want this on my 2020 limited longhorn but unsure if it will change the ride dramatically since I already have the stock 22”s.
It rides a little rougher than stock. But not bad..
@@DOOWORKPRODUCTIONS I’m doing the 2” not the 2.5” so you think maybe it’ll be less taken away from ride quality or the same. I’m just guessing the higher you lift the rougher the ride.
@@jorangel87 I'm not sure, I've never done a 2"..
How are your UCA's holding up? Any issues? I just installed the same Motofab 2.5" level kit. Wondering if I should have gone with new UCA's.
Mine are fine so far..
I got same 2.5 motofab on my 19 big horn my UCAs are still ok
@@misaelcarrillo833 Thanks, mine are installed now, no issues so far. Doesnt really look it will be a problem
Any issues years later with the upper control arms?
@@robz4825any issues thus far
Are we gonna straight pipe this one too?
Maybe! Stay tuned!
Did you need the wheel spacers to fit the 285/60/20 tires on the stock rims or did you just use them for looks?
@@DOOWORKPRODUCTIONS That wasn't a yes or no question.
No, I just did it for looks.
Gotta do this to my 2021 Ram. Beautiful truck my man.
Thank You!
What can i do if i ripped the dust cover on the ball joint?😔😔
Does the 2.5 Motofab kit cause the front end to be higher than the rear?
Slightly
Did it change the ride quality? Also, did you have to adjust your headlights?
Thanks
Very little. Truck still rides great. I did not adjust my headlights..
Just purchased a 2019 Ram 1500 2wd new body style and I plan to put on a 2.5 front leveling kit with 35x12.5 tires on 18x9 wheels! Does anyone have any knowledge as to of this would cause any rubbing? If so what can be done to combat that issue? Also, will I absolutely need to purchase to control arms? And why? (First time truck buyer & first time dealing with large wheels/tires and any type of leveling kit)
love your vids i have the same truck dam near jus curious how did you get white with blacked out girl i have the blck insert but the bezel parts are white
2020 Night Edition Package comes this way from the factory.
Love this. Exactly what I’m looking to do with my black on black 19. Why did you get rid of your 19?
Because I wanted a new one with the Big Screen and Pano Roof..
Put a 4ft level underneath the door sill and you will see that you are now running high in the front, the rear fender well has more arc than the front
4ft...Jesus that's 48"
damm what size are those tires? are they on stock 20 inch oem rims?
285/65-20 on stock wheels yes.
What do you think about 3” level kit on 35s?
Not gonna work with stock UCA's..
@@DOOWORKPRODUCTIONS 2.5 moto fabs with light trimming will work?
And info on putting it on a limited with air sus?
I did the same level kit and 4 shops can’t get the alignment on my 2021 Laramie any advice I don’t want my 33” nitto getting mangled with the wheel pulling to the right
I have the same problem. Can't find an alignment shop to make it 100% right. It amazes me that these Hunter Alignment Racks don't have updated software to align these new trucks...
My only option was to order rough country’s 3.5 lift kit which cost 1100$ that includes the struts and shocks instead of the puck spacer. I heard the reason why we can’t get the trucks aligned is because of the control arms being to out of wack and the new heavy duty control arms will sit flat and not throw off the geometry. With the 2.5 motofab the control arm is at max angle
@@dominickli3633 That makes sense!
Will never use a puck spacer again.....adjustable coilover is way to go....more money but you'll end up there eventually anyways so....actually be cheaper to do it the first time
Can anyone please tell me is this effect on ride quality
What tires are those ? Looks
Great !
285/60-20 BFGoodrich KO2 Tires
Is that fits 2021 Ram bighorn Eco Diesel 4x2?
Yes.
Well why did you get such a bigger tire? Subscribed
That’s a good looking truck. This is the one that I want.
Does the bigger tire take a big gas hit ??
Yeah..
So did you trade in your 2019 for this 2020?
Yes, stay tuned, I have something new coming to the channel!
Question, instead of the 2" spacers, could you just go with like 285/55/20 or 285 50/20? Would that give you that same amount of tire outside the fender well?
Not sure..
The factory wheel is 20x9 if you want a wider look go 20x10 or 20x12 on a 33x12.5r20 tire no rub👌
Any updates on the ride ? How stiff does it actually get ?
Little stiffer than stock but not bad!
Nice looking truck. What rims do you have on? I love them. I have a 2021 Larime.
These are the stock Big Horn Night Edition Wheels.. with 285/60-20 BFGoodrich Tires..
how is the angle on uca at the ball joint?
Besides, the .5” difference - why would someone get the 3” spacer, instead of the 2.5”? They’re both the same price too
I definitely wouldn't. Because then you would really need new upper control arms. I think you can get away with the stock ones with the 2.5"
What 2 inch wheel spacers did u use?
Amazon Specials, look back through my older videos, I did an install/review video on them..
workshop I want to lift my ram 2 and a half can you give me an estimate
Where did you get your blackout decals on the bumper and hood?
He has the night package
How much did they charge to install?
I installed it myself with some help from one of my buddies..
With the spacers have you had any issues? Like do you have to keep getting it re-alligned?
No issues at all!
Is there one for 2WD?
It work on my 2022 2wd thank you 🙏🏼
Do you know if these motofab leveling kits fit the 2021 models?
Yes without Air Ride..
What offset do you have on there. Looks great!
These are the stock wheels..
Ohh man congratulations. Happy for you my friend. Why did you get rid of your old truck? It was nice too
Very nice! Thanks for sharing
Is your rear-end factory?
Yes..
I know you said the tire but do you mind commenting back with it... Thanks
285/60-20 BFGoodrich KO2
Question, it is 2.5” on each wheel?
That’s the answer I also want to know lol
Hey what kind of tires are those? Brand etc..
It was mentioned many times in the video.. They are BFGoodrich KO2 A/T Tires.