+CJ Tieleman Word! This is the exact reason I tell other Honda guys don't focus on peak power numbers so much. With lightweight chassis and solid motors 200hp performs like a lot more.
Don't forget the gearbox. Stock k20 all ready has a short gearbox wich helps alot. 2nd gear cuts of at 85km/h at 8200 rpms, and there's a lot of shorter final drives available
I have an EF hatch in perfect shape. I'd argue that it's easily the best condition 90 EF Hatch SI in America and if not, it's at least top 10. I have it garage kept with still only 140k original miles on the motor. I got it from my best friends family after he unfortunately took his own life a few years ago. He always wanted to swap a K20 into it but never did. At some point, I'd like to swap a K20 into it but I've never been that good when it comes to building cars etc. I can build computers all day, but I'm a newb when it comes to working on cars. I also don't have the 8-10 grand that I figure I'd have to spend in order to make this swap happen. I wish I could maybe get some help with a kickstarter, or possibly a go fund me or something and share my story with those who may be willing to help me make this dream come true for my dear friend Andrew. He's been gone for almost 3 years now. It was on 3.12.17 that he unfortunately took his own life after dealing with depression. 😪😰 I know he'd be happy that I got the car after he passed, but he'd probably be mad at me that it's still just sitting in the garage. At the same time I keep it garage kept while my Audi is out in the snow and terrible weather conditions out here in the Pacific Northwest.
K20a2 is from an EP3 type R the difference between the 2 i dont know. This engine costs about 10k euros because it runs on nitrous. A stock engine/longblock will cost around 2k the bolt ons about 1500 (header throttle intake) ecu and swap stuff about 2k so a simple swap about 5.5 -7k
CJ Tieleman Currently i have moto license for 125cc i have street legal Honda CR 125 - 2003 but next summer i will take classes for Car license and im thinking either a honda or a jeep like a suzuki vitara or samurai or smth
I already have honda civic grand nouva 91. can you tell me the modification you did with your ee9 car? I need your advice to make modifications to my car. thank you
stock k20a2 longblock RRC intake 70mm throttle 3" exhaust with a Simons muffler Ktuned bigtube header and a magnificent tune from Sneaky tuning in Holland
Farid Abedrabbo rrc intake bigtube header 4221 drom ktuned no cat and 3" exhaust with a 32cm freeflow exhaust from simons and a 3" coldair intake with a 6" vibrant filter
Do you have any social media accounts I can dm you about where you got the parts?? They don't seem to be the right ones when I look for one, thanks for replying!!
Big well done, it sounds really good. I have an ec8 currently 15 vtec I really would like to k or b swap it in the near future as my first project any suggestions on the k swap?? I've heard its got a lot of work to be done.
Hassan Massan hater detected!!! A honda with k20a or b18c1 with bolts on and a little more can destroy bmw m3, bmw 335i This motors only are for people who really know about cars and mechanic
Even for a K20 in an EF hatch that upfront torque is unreal looking! A lot of turbo motors don't even get a snap like that. Impressive!
John Hayes and its only 250bhp on pump 98 gas
+CJ Tieleman Word! This is the exact reason I tell other Honda guys don't focus on peak power numbers so much. With lightweight chassis and solid motors 200hp performs like a lot more.
Don't forget the gearbox. Stock k20 all ready has a short gearbox wich helps alot. 2nd gear cuts of at 85km/h at 8200 rpms, and there's a lot of shorter final drives available
Ahh that cam sound from the front is the best sound i ever heard no engine can match that k series sound when the car is coming towards camera
Alex Cast tnx
this sound is the best i love it
I have an EF hatch in perfect shape. I'd argue that it's easily the best condition 90 EF Hatch SI in America and if not, it's at least top 10.
I have it garage kept with still only 140k original miles on the motor. I got it from my best friends family after he unfortunately took his
own life a few years ago. He always wanted to swap a K20 into it but never did. At some point, I'd like to swap a K20 into it but I've never
been that good when it comes to building cars etc. I can build computers all day, but I'm a newb when it comes to working on cars.
I also don't have the 8-10 grand that I figure I'd have to spend in order to make this swap happen. I wish I could maybe get some help with
a kickstarter, or possibly a go fund me or something and share my story with those who may be willing to help me make this dream come
true for my dear friend Andrew. He's been gone for almost 3 years now. It was on 3.12.17 that he unfortunately took his own life after
dealing with depression. 😪😰 I know he'd be happy that I got the car after he passed, but he'd probably be mad at me that it's still just
sitting in the garage. At the same time I keep it garage kept while my Audi is out in the snow and terrible weather conditions out here in
the Pacific Northwest.
Just build it bro you need 5k to get a k20a2 bolt on with 70mm throttle body rbc intake and 3"freeflow exhaust.
Hey if you ever want to sell it let me know
Fkn nice as hell and I love the camera mans laugh after the first pull
Altijd tof om te zien dat ik deze civic gebouwd heb!!!!! Ben blij dat hij nog rond rijdt 👍🏻👍🏻👍🏻
Ja hij rijd nog maar veel vervangen al blok bak interieur maar veel nog zelfde
Also the car itself looks dope to me! Not over the top but still beastly like it should be.
John Hayes tnx man
Magnifico sonido...hermoso...
Love your vtec sound... 💚
Old school I love it!!!
That shit fucking moves! Good work!
More videos on this beast!! Love a k20 sits perfect in this hatch
That exhaust sounds really nice like a honda should sound my d16a6 rebuilt sounded similar people asked me if it was turbod I said no why lie
Nothing will ever beat the limiter at 2:25
love it sound sick...
Stock k20 with header 3inch exhaust and 70mm throttle and a super retune
CJ Tieleman straight piped or has muffler/resonator? Sounds insane!
WBRos59 has 1 small resornator
thats nice good k20 header nice sweet
which header?
how did you get the hood/ground clearance? what mounts?
k20a2 stock motor met boltons en 3" uitlaat systeem 250pk n/a
i love your ef bro wha exhaust and mods do you have on your k20 ef ?????
Doing this to my 91 hatchback wish me luck!
Ringan siot...sound memang👍👍👍👍👍👍👍
Trying to kswap my ef too, what hood was used?
i like the black honda gear box it sounds good
So clean!
Beest van een motor!
Specs?
Did you put the battery in the back?
Yes
very very good
Nice car bro.Which header are you using?
emrvr ktuned bigtube
fit to directly? or cutting crossmember?or what:)
From what honda is the K20A2 from?
Where is the difference in K20A2 and K20Z3?
How much does an engine like this cost?(with normal millage)
K20a2 is from an EP3 type R the difference between the 2 i dont know. This engine costs about 10k euros because it runs on nitrous. A stock engine/longblock will cost around 2k the bolt ons about 1500 (header throttle intake) ecu and swap stuff about 2k so a simple swap about 5.5 -7k
CJ Tieleman damn that alot, but your ee9 is so sick
Blaž Benčič thanks bro. What do u drive?
CJ Tieleman Currently i have moto license for 125cc i have street legal Honda CR 125 - 2003 but next summer i will take classes for Car license and im thinking either a honda or a jeep like a suzuki vitara or samurai or smth
Blaž Benčič ok.
amazing
😂😂😂😂 engines are there to be killed already building a nitrous engine
Do to know how this guy got the k20a2 in his hatch with the stock hood? I've got the proper name brand mounts and it sticks up 1 inch to far
I just love that Ee9 hatchback
what's was the last year of that body style p.s. bad ass hatchback btw.
Jernard Davis tnx last year was end 1991 begin 1992 here with us in holland
I already have honda civic grand nouva 91. can you tell me the modification you did with your ee9 car? I need your advice to make modifications to my car. thank you
stock k20a2 longblock RRC intake 70mm throttle 3" exhaust with a Simons muffler Ktuned bigtube header and a magnificent tune from Sneaky tuning in Holland
thanks CJ
Hey how are you! What is the config for that sound? Cheers from Peru!
Ps: open header? 3 inch exaust..?
Farid Abedrabbo rrc intake bigtube header 4221 drom ktuned no cat and 3" exhaust with a 32cm freeflow exhaust from simons and a 3" coldair intake with a 6" vibrant filter
thanks!
That hatch is a rocket☝
VINNY VIN RICE rocket. Lol sounds like a lawnmower
Was een eer om naast je testaan cj bij japfest 2018 👍👍👌👌💪🏻
That shit goes hard
Pretty loud But sounds amazing
Hey bro, what are the exact spec of exhaust and headers you're using??? I'd love to get my EK to sound like that
kiNg_ Rj_101 3" catless pipe with only 1 simons exhaust (32cm) srs endtip (4") and Ktuned bigtube 4221 header
Do you have any social media accounts I can dm you about where you got the parts?? They don't seem to be the right ones when I look for one, thanks for replying!!
kiNg_ Rj_101 insta cjtieleman
Facebook c j Tieleman
Fb Nitrous Xpress
Wow ❤
Slooo sloooo slOOOOOOOOOOOO(vtec kicks in)
0:38
GAAAAAAAASH!!!
Bring The Noise! 🔊
geiles teil!!
Tnx people for all the nice comments
What kind of hasport swap for ee chassi? Efk1 or efk2?) thank you
Efk2
do you change left bracket? form ED|EC or use spacer?))
Gleb Pimenov yes we changed it for a ed6 bracket
What is the setup of the engine?
How did he get to close his hood without cutting it?
True
Love the sound dude. I'm waiting for someone to say this sounds like a fart can...
Vinnie Chicknugz haha let them hate the sound.......i always say the harder they hate the more I love it.....haters gonna hate
Is that N/A or Turbod??
Dylan Galdes this is na
Big well done, it sounds really good. I have an ec8 currently 15 vtec I really would like to k or b swap it in the near future as my first project any suggestions on the k swap?? I've heard its got a lot of work to be done.
Sick
Is that's really nice i just love the sound alot
Robert Mota thanks
omg that is so cool
Zooo wat een monster ik hou echt van civic's
So true
o kurwa no :D
I think 3" is maybe too much for na 4cyl with those mods, 2,5" would be better maybe
Oh it has nitrous nvm
2JAYZ-GTE nooo wayyy 2.5" is way to small if I use 2.5 it will make only 220bhp
2JAYZ-GTE it has nitrous but n.a. with 3" gives the car 30bhp extra comparing it to 2.5"
Heerlijk dat zoiets in Nederland rond rijdt haha
Tnx man😎
CJ Tieleman zie dat ik al had gecomment op deze video hahah, oepsie
it's very loud
CJ Tieleman its very gay car with no hp get a stock bmw u get more plezure
stfu
CJ Tieleman why is it so loud?
CJ Tieleman is it straight pipe
Hassan Massan hater detected!!! A honda with k20a or b18c1 with bolts on and a little more can destroy bmw m3, bmw 335i
This motors only are for people who really know about cars and mechanic
😎😎❤
That's pretty fast . How much power is he putting down
Sterling Archer 250 atmospheric and 380 on nitrous
Thank god i got my Ep3 going to swap it to a K24
steven balcasarez ???
Steevnb * why everyone knows ep3s are the worst civic
To each they're own boss , I like the ep3
Kesin türk bu adam
Anyone know of a good build vlog that shows how to get a k20 into an EF chassis and keep the hood intact?
predatorInc look at our video called SFP
@@CJ.Corvette link plz? Anyway nice EF.
@@andrewandrew4333 what link
@@CJ.Corvette I mean what a video called SFP?
ik ook haaahahahah leuk auto
Ehhhh love it tht shit
ZV-41-ST 😲😭 dat is volgens mij mijn oude civic. Die heb ik in 2006 verkocht. WTF!!! ZE LEEFT NOG!!😭😭
i wanted to see a flyby
Oscar A a
flyby and hiting the limiter in gear while fly bying
Blaž Benčič its cuz before hes about to pass by the camera guy he lets off the gas lol
Oscar A Yes, true, my uncle used to had a stock EE9 but he had like a 1.6 -NON Vtec engine :(
What happened @ 1:30
Nothing
No matter what it can not die no way 😎😎😎🙂
I want to buy one and touge run with it
name of the exhaust
Koen Dorrepaal Simons 3" freeflow
What about k24?
Josedaniel Jimemez Barquero what about that?
CJ Tieleman I'm planning to k swap my car, but don't know what better k24 or k20
Josedaniel Jimemez Barquero
K24 with k20 head and dragcartels will bring you 300bhp
Isınlanan k20 yapmışlar :)
A-OY KA-RA-MA
There's a place call the track, get there.
There's a thing called street racing you should try it
Heujj, allcarmeet Ulft.. Hehe
FashionKiller 1 ?
CJ Tieleman dat ik deze herken van de meeting in Ulft van dit jaar haha
FashionKiller 1 ah zo ja dat klopt
CJ Tieleman leip ding man
ahhh... k20 :')
A-TA VA KA-RA-MA
Simons
Di je klopka
(´・ω・`)👍
😂😂😂
Too loud lol