Did you happen to include in a video how you provided power/ wired for power the 608 or is the power provided by the head unit? Also does 608 need to be grounded? Thanks for the great video series and your help!
Hi great video thanks for the help, I was wondering where did you end up installing the crossovers and why didn't you install the crossovers next to the amp and dsp?
Wire Strippers: www.crutchfield.com/p_18119100/SG-Wire-Cutter-Stripper-Tool.html?tp=990 RCA Terminals: Link in the description of this video Wire: Link in description of Part 1 Video
Where does the signal from the sub come from? Also it looks like you ran 6 out puts going to the amp. Does that include tweets or an Additional sub for later?
The lows get separated by the DSP and put on a separate Stereo channel. You are correct about 6 RCA outputs from DSP to AMP. LF + RF + LR + RR + Sub Left + Sub Right
@@GJDGarage so when using the dsp for the front speakers which are spliced into the tweeters what signal do you assign the fronts going to the amp. Do you use high mids or bass since Is two different signals for two different speakers.
William De La Pena I know the focal ISS 165’s will. You can verify by using crutchfield.com’s “will it fit?” tool. Just answer the questions about your car and it will spit out the compatible speakers.
Man i just received this enclosure today so hyped, and your docuseries is so helpful. Thanks for the effort ! 😀
Did you happen to include in a video how you provided power/ wired for power the 608 or is the power provided by the head unit? Also does 608 need to be grounded? Thanks for the great video series and your help!
How’d you wire the dsp to the head unit ? Is it a 9 speaker mustang ? Thanks
Hi great video thanks for the help, I was wondering where did you end up installing the crossovers and why didn't you install the crossovers next to the amp and dsp?
The ISS 165 crossovers are tiny and to be installed in-line.
Do you have a link to the wire strippers? And the RCA cable you used? Thanks
Wire Strippers: www.crutchfield.com/p_18119100/SG-Wire-Cutter-Stripper-Tool.html?tp=990
RCA Terminals: Link in the description of this video
Wire: Link in description of Part 1 Video
Man these are some great videos! Do you have an active link for the enclosure?
www.ebay.com/i/302601217963?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=302601217963&targetid=475515100021&device=m&mktype=pla&googleloc=9008771&poi=&campaignid=1669934840&mkgroupid=65058350539&rlsatarget=pla-475515100021&abcId=1139296&merchantid=7956594&gclid=CjwKCAjwzJjrBRBvEiwA867byuaM5QIO5KXVTTTwVaLM_KpMy_H0Bt_UUtQcxwrlG0tbAPkYgpHLCxoCIUIQAvD_BwE
Where does the signal from the sub come from? Also it looks like you ran 6 out puts going to the amp. Does that include tweets or an Additional sub for later?
The lows get separated by the DSP and put on a separate Stereo channel. You are correct about 6 RCA outputs from DSP to AMP. LF + RF + LR + RR + Sub Left + Sub Right
@@GJDGarage so when using the dsp for the front speakers which are spliced into the tweeters what signal do you assign the fronts going to the amp. Do you use high mids or bass since Is two different signals for two different speakers.
Sorry it took so long. I didn’t get notified you made another comment. I sent the full spectrum and let the crossovers do their job.
Did you have to do any modifications to ACM unit? Also I want to follow follow your setup. Would you recommend a dsr1 for Dsp?
The dsr1 should work great.
nice work.
Thank you sir!
Hey bud .. just to make sure before i buy.. can i install 6 3/4 speakers on the front no problem?
William De La Pena I know the focal ISS 165’s will. You can verify by using crutchfield.com’s “will it fit?” tool. Just answer the questions about your car and it will spit out the compatible speakers.
I will be installing an amp for highs and another for subs.. do i need to buy one of those dm boxes?
I would. There are other ways to do it, but a DSP will give you greater control over crossover points and eq.
need to re-record it without the headcold now. I think I'm gonna be sick watching it. Good guide otherwise though.
never mount amps on sub enclosure
You need to contact all the powered sub manufacturers and share your wisdom. They have been doing it wrong all these years.