Gas soldering iron
HTML-код
- Опубликовано: 20 окт 2024
- PARKSIDE 3-in-1 Gas Soldering Iron Set
3 in1: Versatile gas soldering iron set with infinitely adjustable power:
Soldering torch with precise flame - ideal for fine soft and brazing work
Hot air gun for molding plastic or removing paints
Soldering iron for current-independent electronic soldering
Comfortable, wireless work
Practical piezo ignition
Short heating time
Gas type: direct pressure butane
Appliance category: butane-propane mixture
Included accessories
4 soldering tips (1 x preassembled)
1 hot air attachment
1 hot air deflector
1 cleaning sponge in the container,
1 container with 20 g of lead-free solder (1.1 mm diameter)
1 protective cap
Technical specifications
Max. Flame temperature: approx. 1300 ° C
Max. Temperature of hot air: approx. 600 ° C
Max. Temperature soldering tip: approx. 450 ° C
Gas tank volume: approx. 10 ml
material
Housing: acrylonitrile / butadiene / styrene (ABS)
Dimensions
Gas soldering iron set: approx. 177 mm length (without tip) | Ø 51 mm
mass
about 400 g
Hazard and safety information:
Good Tool 🍻
❤❤❤❤❤
Just got one from Lidl too but can’t fill the gas as it goes everywhere but inside the gun.
Thanks for your comment! Make sure the gas bottle is fitted straight on the hose and gently press it 😊
@@proonline9988
I have the same problem Will not fill. Already wasted a can of gas and the and cost of this item.
Also having the same problem,, doesn't matter if it's straight or what angle it is, if you pump it in and out, if you jiggle and shake, it will not fill. @@proonline9988
Same here