Okay so when ur done with letting the air out do you still keep the car on when refilling the tires or do you have to turn it off THEN fill the tires up ?
Thanks, George. Worked exactly as you demonstrated on my daughter's 2016 Explorer after rotating her tires. Got a little worried on the RF tire - it dropped about ten pounds before the horn sounded.
Thanks George for posting this excellent and useful video. You just saved me money because now I don't have to take my vehicle in twice a year to have my all seasons and winter tires changed over.
is this good way in mustang 2016 with automatic transmission? How you turn on procedure in Mustang? Are you also use emergency lights?? please reply, thank you
When I do the steps it says to program left front tire. I start letting the air out and it finally honks when I almost let all of the air out and then I move to the next tire clockwise and it never honks and I look at the dash and it says it has not been programmed start over. I've done this 3 times and its not working. Any suggestions?
Hi I have a ford fiesta 1.25. I have seen your video where you use the brake pedal then turn the ignition 3 times and press the brake again and then ignition again three times and the horn beeps. Then you use the scanner to reset each wheel clockwise direction. The question is could I just take air out the tires like this video to reset them or have to use a magnet
Hello friend, thank you for your video, I did everything you said, I have a 2013 Ford C-Max, but only the horn sounded with the left front wheel, the other 3 did not sound, which may be, I bought the car this month, thanks
Just an FYI this method of pushing brake and turning ignition on and off does not work on the 2011 Ford limited expedition. Instead you must turn the ignition to on position and then press your emergency light button 6x. The horn will honk and your display will say train left front tire ( drivers front tire ) then you have to begin letting the air out of the tire. It will honk once then move to passenger front, passenger back then finally driver back. Make sure all of your tires are inflated to the correct psi before beginning. Your display will tell you after each honk to move the next tire. In my case all of the sensors honked except the final one which is the drivers side rear tire meaning the sensor is bad.
I have a question I have a 2016 Ford f150 I originally had the 17in factory wheels I change them for the 20in Ford lariat wheels can I still train my sensors to work properly thank you in advance
my 2010 Ford fusion enters training mode but the front passenger tire doesn't trigger the horn, I've tried the process twice and nearly emptied the tire both times ... sign of a bad sensor on that tire?
did you fix your hill park assist and traction control off problem yet? dealing with the same problem, right now and pretty sure it is abs speed sensor but wanted your input since looked like you were in the same style as my customers escape 2016
I just bought 2nd hand wheels from a identical car model and got the alarm notification. Then attempted this. This didnt work. Didnt get into "training mode" after pushing the buttoms as described. But after driving for about 30 minutes the alarm notification dissapeared and the sensors started working as they should without doing anything. Car model is Ford Mondeo 2015. This is the European model of the Ford Fusion.
What's the advantage of doing this over going through the settings and getting the system to learn the tyre pressure itself? On a 2012 pre sync focus it's under driver assist on the main dial menu
Tried it on my 2014 Ford Escape didn't work I got two beeps from the horn while releasing air from the first tire. Do you know if I can use a retraining tool on it even though its its not required
Do you know how to do this without that button start? I've got a 2018 Tourneo and the mechanic did something similar with the key but wouldn't tell me what exactly.
Man oh Man.... Im having some issues with my 2012 Explorer Limited 2.0 ecoboost.... Maybe you or someone can chime in and lmk what I'm doing wrong..... As you stated... From an off position, foot off the brake, hit the start button twice. Now ignition is on, but car is NOT. *While car is in run position (motor off) push the hazard light 3 x's - Horn Beeps... (mine dose) While leaving ignition in the on position, goto the front driver's side tire and start deflating till you hear a beep. (I can deflate the tire to the ground, and I get no confirmation beep,) So I'm like F'it, and fill the tire back up.... when I stop filling tire, I get a double beep. I then check dash, and it says tire whatever sequence failed. Re-train frt left tire....... I then do this procedure again, step by step.... and to no avail, I get the same senario???????? My only thought process is that maybe bc I have a set of 24x10 inch rims on the car, maybe that's why...????....???? SOMEONE PLEASE HELP ME... THIS HAS BEEN A HUGH ISSUE FOR ME... And I obviously can't figure this out..... I'd be so VERY APPRECIATIVE if anyone could help me..... Coleon@gmail.com Thank You A MILLION TIMES, and then Some.... Frustrated in Florida, John....
Doesn't work on my Kuga 2015. " Tyre sensors not detected". This is the message that keeps coming up on my screen. I can reset it but after 5-7 miles it appears again.
More RUclips videos need to be like this! Straight to the point, 100% useful information.
Awesome bud, this video saved me a lot of drama. Their is little to no videos anywhere on these topics regarding push button start escapes. Thankyou
Okay so when ur done with letting the air out do you still keep the car on when refilling the tires or do you have to turn it off THEN fill the tires up ?
Thanks, George. Worked exactly as you demonstrated on my daughter's 2016 Explorer after rotating her tires. Got a little worried on the RF tire - it dropped about ten pounds before the horn sounded.
I put in new tps on 2016 explorer rf let it drop 13 psi never beeped
Thanks George for posting this excellent and useful video. You just saved me money because now I don't have to take my vehicle in twice a year to have my all seasons and winter tires changed over.
you are the best ..... the magnet did not work for me, but this did.
Thumbs Up amigo.
Much appreciated. This worked for me on a 2018 explorer with push button except I had the hit the hazard light button 5 times.
Super 👍😉😀
Thanks!
Dude, you are genius.
Anyway thanks a lot. It worked perfect on my mustang
is this good way in mustang 2016 with automatic transmission? How you turn on procedure in Mustang? Are you also use emergency lights?? please reply, thank you
What year your mustang was ?
Hi,i have a 2018 ford fiesta st line,nothing seems to happen when I press the hazard button 3 times,any ideas,thanks
Works on a 2016 Explorer as well... just incase someone needs that info. Great video
I have a ford Taurus 2013 push start tire pressure sensor fault light is on help
@Dickie Romans
Thanks for posting ‼️
I'll try it tomorrow 👍😉😀
Ford Flex 2010 with manual key. This worked for me. Thanks.
Mike Hamann did you have to turn key on and off 3 times?
😀😀😀😀 Jorge you’re the man ... very smart man Respect Brethren👊🏿 🇯🇲
Does this work with a new sensor the system has never seen before or only ones previously programmed (eg wheel rotation).
my own daughter had to help me out with this till it worked! lol it actually did work. Thanks so much
Hi Christine how much air did you took out I kept going And after10psi it says restrain tire. I tried again didn't work
@@saqeeb9000 what car do you have?
@@osamahabeeb7132 2010 ford fusion se
@@saqeeb9000 yeah it didn't work on my 17 fusion
Thanks. This just the info I was looking for.
Thanks a lot! Very usefull video. Does this work on a 2013 Ford Explorer Limited?
It didn't work on mine
When I do the steps it says to program left front tire. I start letting the air out and it finally honks when I almost let all of the air out and then I move to the next tire clockwise and it never honks and I look at the dash and it says it has not been programmed start over. I've done this 3 times and its not working. Any suggestions?
I have a push button start Buick encore will this work on my right now my back passages tire has reading -
Hi I have a ford fiesta 1.25. I have seen your video where you use the brake pedal then turn the ignition 3 times and press the brake again and then ignition again three times and the horn beeps. Then you use the scanner to reset each wheel clockwise direction. The question is could I just take air out the tires like this video to reset them or have to use a magnet
Is this process the same on the UK Ford Focus?
Worked on my 2019 ford ranger..note it's not keyless but it worked!!!didn't used any pen or pencil.just my nail lol
Hello friend, thank you for your video, I did everything you said, I have a 2013 Ford C-Max, but only the horn sounded with the left front wheel, the other 3 did not sound, which may be, I bought the car this month, thanks
Do you have a method with a key? 2017 Ford Interceptor
Does this work with Fords using Key ignition ?
Just an FYI this method of pushing brake and turning ignition on and off does not work on the 2011 Ford limited expedition. Instead you must turn the ignition to on position and then press your emergency light button 6x. The horn will honk and your display will say train left front tire ( drivers front tire ) then you have to begin letting the air out of the tire. It will honk once then move to passenger front, passenger back then finally driver back. Make sure all of your tires are inflated to the correct psi before beginning. Your display will tell you after each honk to move the next tire. In my case all of the sensors honked except the final one which is the drivers side rear tire meaning the sensor is bad.
I have a question I have a 2016 Ford f150 I originally had the 17in factory wheels I change them for the 20in Ford lariat wheels can I still train my sensors to work properly thank you in advance
my 2010 Ford fusion enters training mode but the front passenger tire doesn't trigger the horn, I've tried the process twice and nearly emptied the tire both times ... sign of a bad sensor on that tire?
Would this work on a 2014 Ford Explorer (police inspector ) ?
Great video George, do you know how to replace or inspect the sensors? My car has the "tyre sensors not detected" error
Was it work for your tyre sensor not detected? Or you replaced sensor?
How do you know if your 2014 fiesta supports this if you don't have the sensors?
Does this work on a 2008 mercury Milan premier
What if you use another Dorman tpms from another ford vehicle on 2008 f150 5.4 tritan pickup
Great! It worked for my Ford edge 2015! Thank you!!!
will it work on mondeo 2015 .put bigger alloys on and got that light on dash
Thanks so much. This helped a lot and likely saved me money.
What about car without push button start?
I have ford Mondeo 2015 . Thanks
Does this work on the new 2021 Ford rangers?
Works for me 2010 ford edge SEL AWD thankz a lot!!
did you fix your hill park assist and traction control off problem yet? dealing with the same problem, right now and pretty sure it is abs speed sensor but wanted your input since looked like you were in the same style as my customers escape 2016
Work on my ford maverick 2023! Thanks 👍
If I changed two front rims in my 2014 fusion do I need to do this?
I just bought 2nd hand wheels from a identical car model and got the alarm notification. Then attempted this. This didnt work. Didnt get into "training mode" after pushing the buttoms as described. But after driving for about 30 minutes the alarm notification dissapeared and the sensors started working as they should without doing anything. Car model is Ford Mondeo 2015. This is the European model of the Ford Fusion.
my mondeo mk5 shows tpms sensor malfunction ... ! How can i find out which one is it without going to a dealership?
Aren’t you supporting over fill the tire to 40 or 45psi. Then start the procedure?
I have a ebay tpms light that won't train with exiter tool may try this
I tried on my 2013 Ford Fusion it goes into learn mode but no honk confirmation after releasing most air front driver tire is something wrong ?
I had the same issue. Did you ever figure it out?
Same here.
Did you guys figure this out? Same issue with my 2010 fusion.
@@babyd755 Did you find any solution?
Did you find any solution?
Does this work for key cars?
What's the advantage of doing this over going through the settings and getting the system to learn the tyre pressure itself? On a 2012 pre sync focus it's under driver assist on the main dial menu
no advantage :) some Ford´s just dont have this option on the driver assist settings :)
How do you reset it on a 2018 Ford Escape SE 4WD ?
Interesting video-thanks for making it. Does this work on a 2015 Ford Fusion Hybrid?
I guess there’s one way to find out 😂
Tried it on my 2014 Ford Escape didn't work I got two beeps from the horn while releasing air from the first tire. Do you know if I can use a retraining tool on it even though its its not required
thanks ! no bs straight clear info !!
Will this work on a 2020 F-150 Platinum edition ?
Will this work on 2014 escape
Thanks, George.......🙏😏
Thank you, you saved me $58.00
A shop was gunna charge you 60 bucks
the second tire took a little longer? did you over inflate it?
Did you find any solution?
Hello I have ford c max 1.6 diesel titanium 2011, I get notification " deflation detect OK to store Tyre pressure" , how do I reset it??
will this work on a 2017 focus st with a push button start but no touch screen display?
probably not
2016 Edge Worked perfect! Thanks!
What about for Toyota tacomas?
When adding a new motorcraft tpms out of the box. Do you need to anything to the sensor before mounting the tire over it.
Yes its still has to be synct to the vechicle
George Melnik , but can that be done after tires are mounted.
Thank you it was helpful. It works with my C- max 2013
does it work for US c-max hybrid or for European c-max? I just tried with my 2013 c-max energi but it does not work
I tried this on a 2012 Mustang GT but it was turn key no horn beep any other ideas?
It works on 14’ mustang???
How do you put the air you let out back in?
It also works without the push button start on 2013 Ford escape sel with screen
it works ! Perfect ! Thank you !!!
I had to push the hazard button 6 times to activate the TPS training on my ford focus 2013.
Technically he did mean turn it on and off 3 times he just worded it wrong. As you see him press it 6 times
Thank you. It works on 2017 Fusion titanium
but if i have the classical key instead of the button, will it work too?
Good question... just try it ‼️
Great video! Thanks for posting it!
Will this work on my 2014 Bmax ?
will this work on 2019 kuga
Do you know how to do this without that button start? I've got a 2018 Tourneo and the mechanic did something similar with the key but wouldn't tell me what exactly.
Do the exact same procedures but with your key.
Watch this:
ruclips.net/video/aFateW5KGAI/видео.html
Unfortunately didn't work with 2015 Mustang. Any idea how to fix it?!
Thanks
Really good - thank you!
I have 2019 F150 but the wheel come from 2020 F150 , can I retrain those sensors to my 2019 truck ?
Thank's bud! You saved me some money!
Man oh Man.... Im having some issues with my 2012 Explorer Limited 2.0 ecoboost.... Maybe you or someone can chime in and lmk what I'm doing wrong.....
As you stated...
From an off position, foot off the brake, hit the start button twice. Now ignition is on, but car is NOT.
*While car is in run position (motor off) push the hazard light 3 x's - Horn Beeps... (mine dose)
While leaving ignition in the on position, goto the front driver's side tire and start deflating till you hear a beep.
(I can deflate the tire to the ground, and I get no confirmation beep,)
So I'm like F'it, and fill the tire back up.... when I stop filling tire, I get a double beep. I then check dash, and it says tire whatever sequence failed. Re-train frt left tire.......
I then do this procedure again, step by step.... and to no avail, I get the same senario????????
My only thought process is that maybe bc I have a set of 24x10 inch rims on the car, maybe that's why...????....????
SOMEONE PLEASE HELP ME... THIS HAS BEEN A HUGH ISSUE FOR ME... And I obviously can't figure this out.....
I'd be so VERY APPRECIATIVE if anyone could help me.....
Coleon@gmail.com
Thank You A MILLION TIMES, and then Some....
Frustrated in Florida,
John....
Thank you so much!
tried many times on my 2013 Ford Explorer but to no avail. Is there any way to get this work. i have renewed all the TPMS on my new mags & tires.
Did you find any solution?
Does this procedure works on my ford escape se 2015
Didn’t work on my 2015 cmax push button start with screen :(
It did not work on my 2014 explorer.😕 tire pressure sensor fault appears on the screen. do you have any idea or tips? thanks
Did you find any solution?
Thank you
does it work in a ford 150 2012?
awesome help. thanks.
Nice video
2015 Roush stage3. Didn’t work for mine. All it would do is release all air from tires. No horn beep. lol
Worked perfect on my 2015 Edge
Will this also work for an 05 expedition?
Thank you! I did it!!!!
Does your magnet work on this as well? just curious
Doesn't work on my Kuga 2015. " Tyre sensors not detected". This is the message that keeps coming up on my screen. I can reset it but after 5-7 miles it appears again.
If the horn never honks does that mean the tpms sensor is bad
Thank you!
helo, can i do that with my ford escape 2009
Will this work for 09 lincoln mks