Mopar Front Steel Bumper Install on a Jeep Gladiator Mojave (Factory LED Fog Lights and Skid Plate)

Поделиться
HTML-код
  • Опубликовано: 24 дек 2024

Комментарии • 31

  • @AlejandroGomez-yb3cq
    @AlejandroGomez-yb3cq Год назад +3

    In order to take off those washer/nuts you have to bend the bits that hold in to the bolt thread, you do each bit and it will fly off.

  • @josepech1111
    @josepech1111 Год назад +3

    Thank you for sharing. I’m going to look for a Mopar steel bumper for my gladiator

  • @ronnierebhan229
    @ronnierebhan229 Год назад +2

    Looks great! Excellent job!

  • @tootall2j
    @tootall2j Год назад +2

    Have you had any flickering on the fog lights after you changed the factory wire harness? I have a none LED package and buying the same Rubi steel bumper that comes with LED fogs light. After watching your video I’ll do the same and swap the fog lights wiring to hopefully not get the flickering.

    • @MotoringAdventures_KE7SAI
      @MotoringAdventures_KE7SAI  Год назад +2

      I had ZERO flickering! I was worried too after reading some forums about it. But it was just plug in play.

    • @tootall2j
      @tootall2j Год назад +1

      @@MotoringAdventures_KE7SAI i feel more comfortable moving forward and buying it! Thanks man.

    • @MotoringAdventures_KE7SAI
      @MotoringAdventures_KE7SAI  Год назад +1

      @@tootall2j Glad I could help!

    • @JLUHTX
      @JLUHTX Год назад +1

      @@MotoringAdventures_KE7SAI6 month update?

    • @MotoringAdventures_KE7SAI
      @MotoringAdventures_KE7SAI  Год назад

      @@JLUHTX I have since traded the Gladiator Mojave but the lights and bumper worked great up until I traded it back in late April of this year (2023). Hope that helps!

  • @ranchodosacuarios1967
    @ranchodosacuarios1967 7 месяцев назад +1

    Great video, thank you for all the helpful information. Does anyone know the part number for the fog light “holder”? I got a steel bumper but it’s bare and I need to find the missing parts

    • @MotoringAdventures_KE7SAI
      @MotoringAdventures_KE7SAI  7 месяцев назад

      Thanks! I'm glad you found it useful! The closest thing I could find to that fog light holder is this piece. It's the metal bracket that I think the fog light holder attaches to. But it doesn't show anything else beyond that. www.moparamerica.com/oem-parts/mopar-bumper-bracket-kit-right-68325051ad?c=Zz1mcmFtZS1idW1wZXItYW5kLWZhc2NpYSZzPWZyb250LWJ1bXBlci1hbmQtZmFzY2lhJmw9NDAmbj1Bc3NlbWJsaWVzIFBhZ2UmYT1qZWVwJm89d3JhbmdsZXImeT0yMDIyJnQ9cnViaWNvbiZlPTMtNmwtdjYtZ2Fz

  • @mikemckenna8530
    @mikemckenna8530 Год назад +2

    Great project...where did you find the Rubi bumper?

  • @SouthTXMojave
    @SouthTXMojave 2 года назад +4

    Man, I've been considering this for a while but stupidly I can't get past the not using the Mojave skid plate.

    • @MotoringAdventures_KE7SAI
      @MotoringAdventures_KE7SAI  2 года назад

      That was a hurdle for me as well. The silver skid plate is unique to the Mojave and I wanted to mod the Jeep but still keep some of the Mojave characteristics.

    • @StevenZagaris
      @StevenZagaris Год назад +1

      @@MotoringAdventures_KE7SAI There's a guy with a Mojave that fit it with some cutting.

    • @stevechristmas2733
      @stevechristmas2733 Год назад +1

      I’m half way through my install & it looks like adding a 3/8 steel plate to the bumper pushes it out enough to re-use the Mojave skid. There’s a guy on the gladiator forum that makes & sells ‘em for $45, less than buying a rubicon skid.

  • @johnhancock8955
    @johnhancock8955 9 месяцев назад +1

    Thanks so much for this helpful video! Should I be able to use a t45 that fits a socket wrench to remove the nuts around the bumper to get to the tow hooks or do I have to use a torque wrench? Thanks !

  • @6252e
    @6252e Год назад +1

    Great video, very informative. I also have the same 22 Mojave. I've heard the the Mojave skid plate will work and won't work. In your estimation with having both on hand what would have to be done to make rhe Mojave plate fit? Thanks for any insight

    • @MotoringAdventures_KE7SAI
      @MotoringAdventures_KE7SAI  Год назад +1

      Thanks! In order to make the Mojave plate fit, some minor cutting/fabrication of the bottom part of the front steel bumper where the skid plate and bumper meet, would have been necessary. To some, it is worth doing as they wish to retain the look of the mojave front skid plate. To me, this was an easier route to take and it looks just as good, in my opinion. There are a couple other youtube videos I've seen where they went that route instead.

  • @Mike-B-Jackson
    @Mike-B-Jackson Год назад +1

    Just what I was looking for! Thanks!
    Also, question: I had an “encounter” with my stock Mojave bumper. Only thing that’s damaged is the front plastic and the tabs that keep it in place on the outer edge. I’m wondering if it’s possible to buy just that outermost shell. Not sure I’m going to find people willing to part theirs out. :/

    • @MotoringAdventures_KE7SAI
      @MotoringAdventures_KE7SAI  Год назад

      Glad it could help! I’m not sure if anyone might part out the factory Mojave bumper, but I do see them for sale all the time on marketplace. Might be worth keeping an eye out for one. I sold mine to someone for $40.

  • @lorispino6827
    @lorispino6827 Год назад +1

    Where did you buy that steel bumper? Is it Mopar? What did it cost? Love it. This is the first steel bumper I would put on my jeep. What do you have in the rear? Thanks great video.

    • @MotoringAdventures_KE7SAI
      @MotoringAdventures_KE7SAI  Год назад +1

      It was a factory Mopar steel bumper from a Jeep Wrangler Rubicon 392 that I found on Facebook marketplace. It was around $450. For the back I installed a factory steel bumper and rock trails off of a Jeep Gladiator Rubicon. I posted a video about that installation as well. Thanks!

    • @Good-luck-Jonathan
      @Good-luck-Jonathan Год назад +1

      These are an option you can buy from Mopar. If you want the aluminum version, then company makes a copy of this CP concepts and sold through terrain extreme for weight savings.

  • @christophervela5447
    @christophervela5447 2 года назад +1

    I've thought about this type of mod for our 18 rav4 😁