2008 - 2013 Toyota Highlander Radio install
HTML-код
- Опубликовано: 19 авг 2024
- Parts used listed in the description below!
Watch a full tutorial as a 2010 Toyota Highlander will have a Sony double din Apple Carplay and Android Auto radio installed. This radio provides additional features including bluetooth, USB, backup camera compatibility, and an enhanced sound quality.
This video applies to Toyota Highlander models for years 2008, 2009, 2010, 2011, 2012, and 2013. This video also includes complete radio wiring and assembly, installation, and testing.
Click here to see the unboxing of the radio we used:
• Sony Apple CarPlay Rad...
Click here for the backup camera video:
• 2008 - 2013 Toyota Hig...
Pioneer bypass video: • How Bypass The Video R...
Alpine bypass video: • How To Bypass Parking ...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts used in this install (Amazon Associate Paid Links):
*Sony XAV-AX100 Double Din Radio: amzn.to/3e1qGgJ
*Pac (American International) TOYK989 Dash Kit: amzn.to/3qysWRD
*Metra 70-1761 Wiring Harness Adapter: amzn.to/3z8PT1y
--If you have the steering wheel control / Non JBL trim, use the
Crux SWRTY-61S: amzn.to/3iqHcK7
--If you have the steering wheel control / JBL trim, use the
Crux SWRTY-61J: amzn.to/2T1yw2m
--For just the AUX / steering wheel control harness, use the
Metra 70-8114: amzn.to/356ZIzz
*Toyota USB Flush mount adapter: amzn.to/3z87Yg7
Disclosure: As an Amazon Associate I earn from qualifying purchases
Parts used linked in the description of the video!
where do I find that parts list? looking for the nrs to the JBL system as I have.
@@Jake-or6mq In the description of this video
Thank you so much! You made my daughter's day and mine. We found an excellent running 2011 Highlander that was perfect for her. She was very understanding to sacrifice the backup cam she wanted in her car in order to get a more mechanically sound reliable vehicle in our budget.. and now we get to install it for her! Awesome day!
I just purchased a 2010 Highlander and I’m going to follow your video step by step to upgrade my radio! Thank you so much for this!
I appreciated the comments about the factor AUX connector... wasn't sure why my wiring harness had 2 connectors instead of three. No steering wheel controls, and my new radio comes with it's own AUX mini plug jack. Great video!
My seat heater switch died! I watched an different video where i was supposed to buy several other tools. This video saved me time and money! Thanks so much! My radio has been acting up for years! Not I might replace it my self and save $$$$!
glad it helped!
That’s my Highlander!! Thanks Provo Beast. Great job on the install and I am loving the new radio!
This video was great help on 2012 Highlander. Thanks!
get an android 10 head unit with the OEM-style look, which can also retain the use of the existing dials. It looks way better than this island-in-the-sea approach i.e. the centre head unit surrounded by boring black fascia.
This looks so ugly, I've installed a 10.1 in with Apple car play and android auto and wifi ready, tether from my phone to watch videos and it looks way better than this... it was basically plug and play,
@@311Hanel What model did you got with. Looking at the android 10 units myself. Have a non jbl 2010 highlander
@@pappascw no response gotta love it, I've looked into the 10.1 units. They're all made in China, like most things and the shipping is about 4-6 weeks for the Joying and is $400-600. There are other ones with slower hardware for $100-200 as well that are listed on Amazon. I like the idea of having the Joying because of the have firmware updates for it and the flush mount but I'm not dropping that much money on a headunit for 3.7 inches larger then the current headunit im gonna with and waiting 6 weeks for it.
Which one did you buy? Glad you're able to tell us that a double din radio that's 6-7 inches doesn't fit as nice in a space that can hold a 10.1 radio. What a grand observation. Now how about you tell everybody which one you bought instead so maybe others can decide on what headunit they want in their car. Not to mention which one specifically comes with retaining the existing knobs, all the ones i've seen either have new knobs on the top of the unit, no knobs at all or faux knobs that are just plastic molds. I mean no hate btw, I've just been researching what to do for my 2012 highlander and there is limited info on the 10.1 units
@@311Hanel where did you get your unit? I own a highlander 2012 and I am looking for a unit with car play and mirror . Thanks
My after market came with the same pluses you need. The issue with kin is the rear speakers don't work because it has different connector
Why was the blue power antenna connected to the red wire rather than to the matching blue wire on the stereo harness?
Hello! I'm planning on doing a stereo swap on my car and your video looks like it's going to be super helpful! However, my version has a backup camera and a Bluetooth mic already. Is there a way to use the original hardware that comes with the car to make the swap easier? Thanks in advance!
Great video @ProvoBeastAudio! Is there any way to use the factory metal brackets together with the TOYK989 Dash Kit or some other dash kit? The plastic brackets that come with the TOYK989 Dash Kit are flimsy and I would much rather use the stock metals ones.
Excellent information.. Thank you for your time..
Thank you for all your great content!
I just bought a 2008 Highlander with the JBL system. It already has a Kenwood DNX693S Head unit with a maestro. I'm going to replace it as it doesn't support Android Auto. Can I reuse the maestro for integration? Or am I better off to just get a Crux 61J ? I'd like to retain the factory amp and sub. Thanks
I couldn't find the rear speaker connector 😢😢
This same unit is in the 2010 Highlander we recently purchased, but it is not secure in the opening. It is sliding backward. I watched your video to see what holds it in place, but couldn't tell. (8:11-8:16)
I have a factory back up camera. How would I wire it?
Do you sell a kit to replace the factorty stereo for (2010) Highlander Limited Hybird w/JBL and Navigation. I'd love a Kenwood or Atoto with GPS and keeping all the steering wheel controls. I dealy even OBD 2 diagnostics would be a bonus.
Great job
Hi. I have the mid trim level with steering wheel controls and XM satellite radio. Will the satellite work with this setup? Thanks
Noice!
Can’t we shift the gear without turning ignition on ? Won’t it drain the battery until we finish the job?
Did this car have an amp In it
I have a 2008 toyota Highlander with the back up cam and jlb speakers. Will this set up work for my truck?
Wondering about all the various functions, so I wish you had demoed how it all works (camera, etc.) after the install. I'm also not a huge fan of the new faceplate where the old large knobs were on the side. Are there alternate looks for that?
We have a camera video that walks you through that. We didn't have steering wheel volume controls, or JBL, or any factory features you are asking for. Every radio's functions will greatly vary, so a demo won't do much good for others. Again, if you want to see the backup camera, see that video, linked in the description. No, all manufactures have to create some sort of dash kit to fill the factory knob holes, a pitfall of Toyota's dash design.
I have a 3td plug on my car six wires come into & it look s like about a 12 pin plug. do I need to order something else?
Hi PB, I am trying to connect a XAV-AX1000 to a 2013 Kluger. Bit confused with some of the wires on the harnesses. You able to assist if I send some pics and further discussion? Mike (Australia)
Shoot me a message on facebook or instagram and I can help out.
I also have a question... The radio you installed in this video is discontinued, but if I used a newer model Sony double din, which one would you recommend that could be installed following the steps in your video with the same other parts?
I had the same question. Looks like there is a boss audio double DIN touchscreen on Crutchfield for $199. It got great reviews so I think I’m gonna go that route.
@@VirtualWoodshed I'll check it out as well. What's the model number?
Can I get to the blend door motors from that angle?
I'm guessing it's the same with the SE that doesn't have the navigation but a back up camera on the upper screen right?
I would like to replace my dead 2012 Highlander non JBL radio with a Kenwood dpx505bt cd/radio. I have steering control and the top mounted backup camera. My question is what wiring harness will work with this to retain all functions?
Goto Crutchfield - plug it in and they will tell you what you need.
Hey...loved the video. Thinking about giving this upgrade a try. I did notice that the link to the Sony XAV-AX100 6.4 inches Car Play at Amazon says both 'renewed' and 'out of stock'. The alternative offered for a 2011 Highlander is a Double Din Car Stereo Radio Voice Control Apple Carplay & Android Auto, 7In HD LCD Touch Screen Bluetooth 5.2, MP5 Player with Mirror Link, Front/Backup Camera, USB/SD A/FM Audio Receiver, Subwoofer. Amazon has a model confirmation function, but 6.4 and 7" is a pretty big difference. Is this item really compatible using the stock brackets and trim pieces? BTW...I have the steering wheel controls and JBL speakers.
Having trouble - I have 2010 highlander with JBL plus Navigation. Bought the Crux SWRTY-61J - only the "no-video" harness seems to fit. Any ideas? This radio is apparently impossible to replace? Toyota part # 86120-0E250. What a pain.
Send us a message on Facebook and we can help!
How do you ground the parking brake wire
Ground the wire to a bolt or somewhere you can get ground to body.
❤❤❤❤❤❤
Great video, very informative, will Pioneer DMH-1500NEX work with Toyota Highlander 2010?
Yes, any standard double din will fit the parts used.
And you have to get the correct after market bracket kit.
this does not apply to 2013 Toyota Highlander limited as you will lose the warning lights and airbag buttns
That version will fit a double din radio really easily (using the factory surround).
I have question maybe you can help. I have 2011 hybrid limited. I bought a pioneer from Best Buy and they tried to install but my hazard control panel had multiple buttons and they said I need a different one like what’s in this car. Any idea of what you might do? I’m not convinced they know what their doing bc it was a shot show from the beginning.
Same problem here - 2010 with the navigation. The dash panel is different. I am trying to order a non-nav hazard button about $60 on ebay. Also the crux harness he mentions doesn't seemt to fit the car with the nav and backup camera. ugh. what a pain. thanks toyota!
You skipped attaching the brackets!
Bracket step-by-step instructions are included with the dash kit!
Will this work if I have JBL in my Highlander?
Yes, however, see the description for the alternative harnesses needed if you have JBL.
How did you pop out the piece on the console for the usb mount?
unsnapped it from under the panel.
@@ProvoBeastAudio so did you pop that panel off to gain access from underneath?
@@jonathanlehrman9582 Yes, which is needed in order to run the USB cable through the center console
You sound like Chris pratt
You are not the first to say that... ;)
What size screen did you put in?
All parts used are linked in the description of the vide.
Too much empty space on this dash kit.
You can thank Toyota for the dash design.