Just installed this today in my 95 k1500. Wasn’t to bad. Little hiccups and there. Currently trying to fixture out the light flash horn honk and door locks. Got the remote start working
I was skimming thru this FAST - If a car already has a factory alarm which is thru the vehicles "horn", then would this be a waste ? I'm asking, because I'm for a LOUD alarm.
@@WorldWidedog0 - Ah ok. They got Viper Alarms at Best Buy and since I have their Total Tech membership, they install their products for free (most of them) = I was like, hmmmm $110 to buy and they install it I was happy, but when I saw your video, I was like.....it's horn and NOT the Loud Laser Noises ???? (grunt) LOL
@@WorldWidedog0 - LOL The Honda I got has the foreign car "teeeeeeeeee"- cheap sounding horn. Even though the trans went out on my Nissan Maxima, at least the horn has balls.
About to get one installed myself was wondering if the remote start system would work. But seeing it work on your 96 Chevy have very little doubt it will work on my 06 Durango
It should so as long as there is no vehicle anti theft to get through, that would be your biggest pain, but in the end it’s very worth it if you hate getting in a cold vehicle like me.
Is there a way to get the wire diagram? I got the same remote start setup for my 98 gmc k1500 and want to try to install it myself.. I'm just not able to find a diagram. Thanks in advance and nice truck, love this body style
Hey man great video! Do you know or can you find out if they had to use a bypass when they installed it i cant seem to find out anywhere. I have the same model truck and would like to do this as well. Thanks for any input.
Just curious, How is your viper system working. It looks like you’ve had it for about a year now and I’m considering getting one for my 2010 Dodge Ram truck. Just heard viper was bought out a couple months ago. Any feedback would be appreciated.
The Fandinos I’ve had it for almost 2 years now, and I’m still happy with it, my only problem is sometimes in the winter on the first crank it won’t start the engine, but that’s just how I have the crank timer set low so it won’t overcrank, also I had a problem where the RPM wire wasn’t tapped in good enough so it wouldn’t tell the module the engine was running so it leave the starter engaged, but after the RPM wire was retapped that stopped happening.
Daniel Jr Polendo this 4105V is the only remote start I have experience with and I’ve had no problems with it since I’ve had it installed over a year and a half ago.
Okay then, I would have to check that out. But if it does I would need a bypass modulator ? But either way this is helpful advice and information. I Appreciate it
Daniel Jr Polendo yes, Passlock/VATS requires a chipped key to start the motor, so the module tricks the computer into thinking the key is in the ignition when the remote start is activated. You’re welcome for the information btw.
Joey MaGanja I hold the start button for about a second just to be safe, the parking lights flash when the command is received to start the vehicle. You can start the vehicle through a few walls but I recommend holding the start button for about 3-5 seconds. But once you hit the button it takes about 5-10 seconds to start, depending on how hot/cold it is outside, and if the engine is already warm or not.
@@WorldWidedog0 interesting.. lol. thanks homie i appreciate your quick response. Ill Buy this as yet another Xmas gift for myself and car. Great Vid and dope truck I love that body style
Anyone know how much Amps Viper use from battery?? Without remote starter power consuption is about 0.04Amps, after Viper 4205V instalation battery drainage is about 0.56Amps - it's normal or they connected in wrong way? Viper is killing battery within one week when you don't use car.
Adrian Correa it sounds like you’re saying you don’t have electronic locks right? If so you can still do the remote start and not have electronic locks, but contact your local dealer/installer and see if they can add electronic locks if that’s also what you want
danny Snt That run time is standard run time before auto turning off. There’s a way to get into the module and change but I don’t know how, really only viper dealers know how to.
tilapio meza I had a shop do mine due to how complex it is, but if you have the time/patience you can possibly find instructions online for the Gmt400 trucks, hope this helps.
Bruhhh they want 350 to install in my 89 Chevy which has a throttle body installed 😒 ima just buy the starter and put the thing in myself 350 bucks thats nuts
RUclips Warrior Good luck haha, there’s no instructions that come with it and no videos on these trucks with this remote start, which is why I made this video
tay white probably, just not connect a wire, but I didnt install the system myself, and I’m actually a fan of the honking, it helps me know if I locked from far away.
With this viper remote, you press the AUX button on the side once and then lock it or unlock it and the beeping should be off and you just hear the lock. Hope this helps but like World says, I like the beeping so i know if it is locked/unlocked from far away.
@@WorldWidedog0 did your alarm come with the bypass module ? .i want this on my 2010 silverado .i like yours couse its simple . Need that remote start its cold here in the mornings.
NOE MARTINEZ Mine did not include one, as I did not need one, you can fund universal bypass modules for around $20 online, but it would be best to check the reviews first
@@WorldWidedog0 Is there a way to get the wire diagram? I got the same remote start setup for my 98 gmc k1500 and want to try to install it myself.. I'm just not able to find a diagram. Thanks in advance and nice truck, love this body style
Just bought my first truck used and it came with one of these. Thanks for the tutorial so i know how it works😂
You can wire the aux to roll down windows, or heated seats, or anything like that for them cold or hot days
ZaHe I should’ve seen about wiring the power windows to the aux button, I unfortunately don’t have heated seats
Just installed this today in my 95 k1500. Wasn’t to bad. Little hiccups and there. Currently trying to fixture out the light flash horn honk and door locks. Got the remote start working
I have a 98 K1500, 5.7. Is there anything I need to be advised on before purchasing one for my truck?
@@michealdumasii5432 I believe a special bypass module since passlock/VATS became standard for GM trucks in 1998
Nice remote start. I'm having the same one installed next week before winter hits lol.
Gunnar Dotson in what vehicle?
Hyundai Elantra. Nothing special. Love your truck though
I was skimming thru this FAST - If a car already has a factory alarm which is thru the vehicles "horn", then would this be a waste ? I'm asking, because I'm for a LOUD alarm.
I would think so. But this vehicle did not have a factory alarm system on it. So I’m unsure.
@@WorldWidedog0 - Ah ok. They got Viper Alarms at Best Buy and since I have their Total Tech membership, they install their products for free (most of them) = I was like, hmmmm $110 to buy and they install it
I was happy, but when I saw your video, I was like.....it's horn and NOT the Loud Laser Noises ???? (grunt) LOL
@@cobrakainevereverdies6940 Also this vehicles horn is rather weak. An upgraded horn may also make a difference.
@@WorldWidedog0 - LOL
The Honda I got has the foreign car "teeeeeeeeee"- cheap sounding horn.
Even though the trans went out on my Nissan Maxima, at least the horn has balls.
@@cobrakainevereverdies6940 probably louder than the Chevy truck in this video.
Nice truck as well. My brother had one just like it different color.
About to get one installed myself was wondering if the remote start system would work. But seeing it work on your 96 Chevy have very little doubt it will work on my 06 Durango
It should so as long as there is no vehicle anti theft to get through, that would be your biggest pain, but in the end it’s very worth it if you hate getting in a cold vehicle like me.
Is there a way to get the wire diagram? I got the same remote start setup for my 98 gmc k1500 and want to try to install it myself.. I'm just not able to find a diagram. Thanks in advance and nice truck, love this body style
Chris Ireton thank you for the feedback! Unfortunately I tried the same thing as you and couldn’t find anything other than RUclips videos
Will any wiring shops install this on that year of truck?
Hey man great video! Do you know or can you find out if they had to use a bypass when they installed it i cant seem to find out anywhere. I have the same model truck and would like to do this as well. Thanks for any input.
BadWeather84 My Truck (1996) didn’t have Passlock or VATS, so I didn’t need a special key or bypass module.
You sound like the dude who sells fries on the simpsons.
Just curious, How is your viper system working. It looks like you’ve had it for about a year now and I’m considering getting one for my 2010 Dodge Ram truck. Just heard viper was bought out a couple months ago. Any feedback would be appreciated.
The Fandinos I’ve had it for almost 2 years now, and I’m still happy with it, my only problem is sometimes in the winter on the first crank it won’t start the engine, but that’s just how I have the crank timer set low so it won’t overcrank, also I had a problem where the RPM wire wasn’t tapped in good enough so it wouldn’t tell the module the engine was running so it leave the starter engaged, but after the RPM wire was retapped that stopped happening.
WorldWidedog0 thanks for getting back to me so quickly. Appreciate it!
The Fandinos, did you end up getting it installed?
Nice I’ll get one for my 98 Yukon
Hello, which viper alarm system is better ? I want to install one on my 1995 chevy Cheyenne.
Daniel Jr Polendo this 4105V is the only remote start I have experience with and I’ve had no problems with it since I’ve had it installed over a year and a half ago.
I'm glad to hear that it's still functioning and working properly. So the 4105V would be compatible with my truck?
Daniel Jr Polendo yes, as long as your truck doesn’t have Passlock or VATS you won’t need a bypass module
Okay then, I would have to check that out. But if it does I would need a bypass modulator ? But either way this is helpful advice and information. I Appreciate it
Daniel Jr Polendo yes, Passlock/VATS requires a chipped key to start the motor, so the module tricks the computer into thinking the key is in the ignition when the remote start is activated. You’re welcome for the information btw.
I have a similar truck as your and wanted to know if everything you needed for the install came in the box or did you need to purchase some add ons
No add ons needed, if your truck is a 98+ you’re gonna need a bypass or new key iirc because of passlock/VATS
Ok, thank you
ill buy one soon enough but do you have to hold the start button on the fob or did it take a few seconds to start up?
Joey MaGanja I hold the start button for about a second just to be safe, the parking lights flash when the command is received to start the vehicle. You can start the vehicle through a few walls but I recommend holding the start button for about 3-5 seconds. But once you hit the button it takes about 5-10 seconds to start, depending on how hot/cold it is outside, and if the engine is already warm or not.
@@WorldWidedog0 interesting.. lol. thanks homie i appreciate your quick response. Ill Buy this as yet another Xmas gift for myself and car. Great Vid and dope truck I love that body style
Joey MaGanja Thank you for the complements! If you have any other questions I’d be more than happy to help.
Anyone know how much Amps Viper use from battery?? Without remote starter power consuption is about 0.04Amps, after Viper 4205V instalation battery drainage is about 0.56Amps - it's normal or they connected in wrong way? Viper is killing battery within one week when you don't use car.
Is there any button on the remote that allows you to cancel the idle
Cameron Tirpack Yes, you press the start button again while the motor is running to shut the motor off.
Any complaints?
No other than my crank time is too short for winter here in NC, but that’s no vipers fault, my installer just didn’t set the crank time long enough
So yours is full electric I have a 96 k1500 but I still need to use my key to unlock nd role the windows down and up can they still do remote start ?
Adrian Correa it sounds like you’re saying you don’t have electronic locks right? If so you can still do the remote start and not have electronic locks, but contact your local dealer/installer and see if they can add electronic locks if that’s also what you want
Why does your your truck have 4 window switches? Did they make a model where ex cabs could roll down the back?
The original switch went bad on mine and I had this spare tahoe/suburban switch lying around, only the door windows roll up/down
Oh ok i was gunna be pissed because mines a 98 they dont roll down lol
Ashley Delguzzo if I remember correctly, GMT900 Trucks that are extended cabs do have the option of roll down windows on the extended cab part
Do you still have the Amazon link? Also could you program the truck to stay on longer?
The Amazon link is dead now I believe, try googling the part number
Still working?
How do you get the 25 minute timer on your remote start how do you program that?
danny Snt That run time is standard run time before auto turning off. There’s a way to get into the module and change but I don’t know how, really only viper dealers know how to.
@@WorldWidedog0 thank you s I actually want that 25 minute run time. If it's standard then I don't have to mess with it thanks
What happens if you hit the gas without the key in the ignition?
Cole Pike the engine will rev as normal, for mine at least, as my truck has a cable operated throttle body
would this work even if my truck does not have electric windows/ lock- unlock feature? (94 chevy c1500)
Kevin A. Garcia If I remember correctly it comes with parts that can add electronic locks
Will this work on 2008 Silverado
Will this kit work on any car
Will it run if you insert a duplicate key. One without a transponder.
Depending on if the truck has passlock or VATS equipped, which I believe became standard in 1998
How much was the install at sound solutions
Lyons Den Films $75 took around 2 hours for them to complete the job.
What did they charge
What I don’t understand is where is the panic button
On this model you hold the lock button for a a few seconds
What exhaust setup did you have here?
Dual exhaust with a Jones FB4554 muffler
Bro the focus
Does it come with a alarm system?
No
I have one GMC 1996 Sierra it is difficult to install ?
tilapio meza I had a shop do mine due to how complex it is, but if you have the time/patience you can possibly find instructions online for the Gmt400 trucks, hope this helps.
Do you have the link?
Keiyalon Stephens Viper 4105V 1-Way Remote Start System www.amazon.com/dp/B00CLE47V6/ref=cm_sw_r_cp_api_i_f92VDbNWW83XP
Thanks
Bruhhh they want 350 to install in my 89 Chevy which has a throttle body installed 😒 ima just buy the starter and put the thing in myself 350 bucks thats nuts
RUclips Warrior Good luck haha, there’s no instructions that come with it and no videos on these trucks with this remote start, which is why I made this video
If u get them from CRUTCHFIELD Wich I did it cost 200 dollars and they send you ANYTHING u need for it for free and they walk you through the install!
Can you set it without the horn beeping?
tay white probably, just not connect a wire, but I didnt install the system myself, and I’m actually a fan of the honking, it helps me know if I locked from far away.
With this viper remote, you press the AUX button on the side once and then lock it or unlock it and the beeping should be off and you just hear the lock. Hope this helps but like World says, I like the beeping so i know if it is locked/unlocked from far away.
How much was installation ? I want this alarm
NOE MARTINEZ Installation was $75 dollars by a reputable car accessories/audio shop, it took around and hour to hour and a half to install
@@WorldWidedog0 did your alarm come with the bypass module ? .i want this on my 2010 silverado .i like yours couse its simple . Need that remote start its cold here in the mornings.
NOE MARTINEZ Mine did not include one, as I did not need one, you can fund universal bypass modules for around $20 online, but it would be best to check the reviews first
@@WorldWidedog0 alright i will thanks so much for replying.
@@WorldWidedog0 Is there a way to get the wire diagram? I got the same remote start setup for my 98 gmc k1500 and want to try to install it myself.. I'm just not able to find a diagram. Thanks in advance and nice truck, love this body style
How much to get installed
$75 at my local car audio shop
What if my car comes with key ignition?
Luis Santana you mean you have to use a key to start your vehicle, no push button?
stop saying umm
Hope you liked the video!
Hey ur cute