I followed these steps to a T and nothing. I can’t sustain a connection to the WiFi bridge for longer than 30 seconds before the webpage stops responding. But my WiFi settings say I’m still connected to the bridge.
That's odd. If you use a direct ethernet cable connection (no WiFi bridge), does it work? My WiFi bridge setup in this video continues to work flawlessly.
The final IP address is wrong in the video. Go to your settings menu on the printer > about machine> and at the bottom of the screen is your printers IP address. To connect to your printer, go to the network you just set up in the interface, open a new window and type in your machines IP address and you should be able to access the unit and print.
This is good, now do you have a method of slicing via tablet then sending file to neptune 4 pro max?
Very good, only missing feature is camera stream of 3d printer.
does it work for Neptune 3 pro
@@guest4ff318 does it have Ethernet?
I followed these steps to a T and nothing. I can’t sustain a connection to the WiFi bridge for longer than 30 seconds before the webpage stops responding. But my WiFi settings say I’m still connected to the bridge.
That's odd. If you use a direct ethernet cable connection (no WiFi bridge), does it work?
My WiFi bridge setup in this video continues to work flawlessly.
The final IP address is wrong in the video. Go to your settings menu on the printer > about machine> and at the bottom of the screen is your printers IP address. To connect to your printer, go to the network you just set up in the interface, open a new window and type in your machines IP address and you should be able to access the unit and print.
What if i check for my machine’s IP address and it says “0”?