Chevy S 10 steering wheel removal ignition key replacement

Quick video on how to remove a steering wheel or finish 10 remove directional signal switch and remove the steering wheel and also removing ignition lock

[@stanallport6746]

every how to video should be direct and quick like this one..great job,sir!

[@Jvcomet]

Thanks for watching 👍

[@Prezents]

Thank you!!!! answered my question.

[@Jvcomet]

Thanks for watching

[@Nomadcreations]

Good step by step vid, thanx

[@Jvcomet]

Thanks for watching 👍

[@josh9864]

Thank you for the vid.👍

[@Jvcomet]

Your welcome thanks for watching hope you subscribed to our channel.

[@jacobmendez6186]

Thankyou this video was really useful for me when replacing the wires on how to take it apart👍

[@Jvcomet]

Cool glad it helped thanks for watching.please help out by subscribing and hit the like button thanks. 👍👍

[@coltonneedham8962]

How did you do the hitting part I’ve tried over and over again it won’t work

[@Jvcomet]

Need to put lots of pressure on the back side of the steering wheel with your legs. Then hit the shaft by shocking it it should pop👍

[@LuisOrtiz-yq1ud]

I can’t get the wheel off, what tool did you use to hit it?

[@Jvcomet]

A round steel 3/4” bar and a dead blow hammer. Put pressure on the back of the steering wheel with your legs then make sure the nut is loose but still on so you save the thread from getting damaged. Should pop right off.

[@charlessalard4636]

I need that part turn signal handle goes in..whats it called mine broke in that part.thanks

[@Jvcomet]

That would be the turn signal switch

[@DiablitoSpeedz]

👍👍

[@Jvcomet]

Thanks

[@EGOODWYN86]

What's the name of the tool to remove the locking ring???

[@Jvcomet]

Not sure exactly what’s it’s called other that what you just said. Auto zone or Napa will have it.

[@krazykracker7706]

Thank you so much for the video. I believe my turn signal switch is bad. I don't have any signals on the inside & outside the truck. I replaced the relay & fuse is good. I'm guessing it's the turn signal switch that's bad

[@Jvcomet]

Most likely but check the flasher first . The round thing in the fuse block that clicks power goes through that first

[@krazykracker7706]

@@Jvcomet That's the relay I replaced & the square 1 beside it. I replaced both of them already. Fuses are good too. I'm guessing it's the turn signal switch that's bad?

[@Jvcomet]

That would be the next thing

[@krazykracker7706]

@@Jvcomet Thanks for your help. I can't really take it to a mechanic, they cost too much & it's my only transportation.

[@Jvcomet]

I hear you. Is it tilt wheel or a fixed steering colum. You can probably find a good new or used on eBay pretty cheap.

[@benjaminvick7451]

The steering wheel isn't coming off, I've put all the pressure i can on the bottom and hit it several times and its not budging

[@Jvcomet]

You will have to get a steering wheel puller. You can buy a cheap one from harbor freight or free rental from a parts store.

[@scottpeacock1345]

But you don't show how to remove the horn pad

[@Jvcomet]

It just pulls off. Has a ring that’s kinda slings out. Hope that helps 👍thanks for watching

[@quintinmorfin8129]

My question is how in the hell do you put the steering wheel back on

[@Jvcomet]

Once all the parts are back together the steering wheel will only basically go on one way. Then put the nut back on and tighten it.