1993 Chevrolet Ignition switch replacement
HTML-код
- Опубликовано: 9 авг 2021
- Holy pickles were not in the shop. Today I wanted to show you some of my everyday adventures. Just because the name says transmission doesn't mean we can't do or don't do more.
This customer has been a long time family friend and we're happy to help keep his truck rolling down the road whether it's an ignition lock cylinder replacement or a whole new trans were going to keep him going. I personally feel this way about all of my customers I want each one to know how much we appreciate taking care of their family.
Check back soon for more videos of all kinds of shinanigins in the shop. Thank you for watching our videos. Feel free to check out our Facebook page as well at the link below. 
Авто/Мото
Thank you, sir, for making this video. It was extremely helpful because my manual wasn't so clear, especially on how all those little parts fit together and come apart. That's the power of the internet: two years later and this video is still helping people.
Great customer service When you are in business you go the extra mile to help your customers/ friends
Thanks for the video! Just a little tip for the diyers like myself. The little two pronged switch didn't want to go back in for me. It kept getting stopped by a plastic tab on the lock cylinder. The tab moved real easy. I used a zip tie to hold pressure on the tab(like I would a screwdriver).
Its your channel put whatever videos you want. Don't apologize for making good videos.
Lol thank you
@@expressautotransmissiondav4207 what was the fix to the broken piece?
I just happened to have a few steering columns out back and was able to rob a non broken one out of one. GM laughed at me when I asked for a new one.
While replacing this ignition switch Dave subtly tosses out the following: "When I was 19 I did one of these ignition switch jobs without the use of a steering wheel puller." I cannot overstate how difficult that would be. I would say it's impossible and most mechanics would agree. But Dave did it. For that reason alone I liked & subscribed to this channel; a transmission repair channel. If I understood Dave correctly when he attempted this job so many years ago HE DIDN'T EVEN KNOW THERE WAS SPRING TENSION ON THE OTHER SIDE OF THAT CLIP. So when he finally tore the clip out BANG he was startled by the release. That is called Follow through. In the Oxford Dictionary under the word determination it should just have a picture of Dave with a caption underneath that reads See Him.
Great camera angle.. only surpassed by list of tool list and best of all..the great chatter
Thanks for the video. It’s good to see people step outside of their normal zone and do a video. I call it ignition switch too.
Great, well executed video! Working on my own truck and this is today's task.
how did it go?
Thank you sir! Very helpful video, all I had to do was watch it twice and I called a roll back to let my mechanic do it instead
😂😂😂😂😂
I'm glad you are making this I'm having the same exact problem and you're the only one with the video like this
Man you are awesome keep up the good work
MAN, I have one to do, but scared of not being able to put all the parts back on ?? 1994 Chev. 1500 😨
Thanks for the Visual and Audio Help !! Be safe, ☮️
Great video! I like the comedy!
Thank you were trying to remind everyone that just because the problem is serious doesn't mean you can't have fun fixing it. Plus I really love doing what I do.
Thanks for the video!
Awesome video David 1994 Chevy truck I like them older ones am 1995 k1500 4x4
Indiana is almost 100 degrees with nascar and Indy car at the 500 this weekend
Saved it to my Facebook in case I have to do same
If ya don't know how...practice at a salvage yard
Mater of fact I think I will get some of those parts at my salvage yard box it up as 1995 stock ignition parts
Thank you for the video as I’m one of them that didn’t know how to do that.
That's what we're here for glad to have been able to make the video
Man you made that look so easy
Nice video, thanks.
Good job!!
Thanks I appreciate it
Thank you Man.
Thanks for sharing
thank you dude
you do have a nice shop, and you do good work, ... One of the big builders on RUclips uses an impact to install their "famous" valve bodies 😁😂
Keep doin you man! Good stuff 😎
Thank you so much I really appreciate it. We're gonna keep it up for sure
I did pull a mint condition steering wheel off a 1993 Yukon for my 1976 GMC Motorhome. Same process.
done that but what about that model truck , stuck in park ? I have a 93 , 5.7 350 as well...the shifter moves normal and linkage all moving so it is some internal hairball
The channel is growing!! Keep it up man!
Thank you I appreciate it. We're trying to get it somewhere
The while kit not being junk but it def sucks thing made me laugh out loud man thanks..
Heck yeah
Could I do this if I lost my truck keys? And I just buy key/cylinder kit? And do this myself?
What is that little white piece with the two copper end pieces, that broke called? Asking for a friend, and NOT because I broke mine in the process. Is it necessary for the ignition to work? Great video btw. Helped immensely.
Did you ever find that part, mines was missing from my steering wheel when I replaced my ignition switch, it wasn’t there, and still have problems with the switch, not starting.
this is for a tumbler... not the switch which is behind the tumbler... got a video for that?
I like that dodge in the back ground.
You should see that dodge now it's missing the whole inside stuff
@@expressautotransmissiondav4207 your next video?
I've got one coming next already but I'll do a spotlight just for you and this absolutely gorgeous milk cow chaser
I was a head mechanic at aamco transmissions and I'm a mobile mechanic now
I replaced the ignition cylinder on 1993 s10 followed the instructions but now my flashers stay on ?
Hey bro, ive already replaced the ignition switch just like in your video...fast forward a few years later which is now...my ignition switch started to act up or what i thought was ignition switch...truck would intermittently shut off while driving then it got worse and i noticed that if i rotate the switch forward almost to the crank position then the truck would stay running...i thought it was bad switch because i used non acdelco so i got new oem switch and that didnt fix my issue...truck will crank up just fine but will shut off when switch returns after starting...WTF?...im gonna go to dealership and see if they could print me off a diagram from alldata but was wondering if you could help...i may just bypass all of it and just run a switch with a push button like the race cars have...its a 94 chevrolet k1500 auto 4x4 5.7
I'm using your video so my friend doesn't make fun of me
What is the name or part number of that plastic clip that was broken. Mine is broken too and i cant find it anywhere besides a junkyard
Did you ever fine out what that part number is and what it does in the ignition process
Is this same for 93 astrovan
11:00 “im a slow screwer” … me too bro. Me too.
At 8:03 that plastic piece that he broke, was missing in my steering wheel, does anyone know how to find that part, i replaced the ignition switch but still have problems with it coming loose and it just spins doesn’t make contact truck no start
Helped me fix my 91 suburban that I just bought that had no key at all ignition was so bad it would start with out key I didn't like that
Did the same to my 1994 pickup. After replacement, my battery drains at 5.6 volts and ruins the battery unless I remove the negative cable. Any recommendations?
Did you ever find solution? I have the same issue. Thanks
My battery drains and one by one everything died got new alternator and battery then it worked....now my ex put battery on after jumping a car and he hit something metal a few times and smoke came out engine where red battery box is fried wiring then made a new wire fix it... Nope just cranks won't start .bought new regulator. Computer won't read for diagnostics test .stripped screw on computer . Electrical machanic says if it breaks he needs my permission to remove it to check things out...please help I got a fuel pump fuel filter. I dropped tank and did hoses right .got them white and silver little screw things all 8 out another truck at pick n pull ,my son works hard two jobs goes to school, prom coming up ,graduation,passing his test to join the Marines like he's wanted since 5 yrs old....all I want to do is get my 2004 Chevy avalanche working and a little sprused up so I've gotten under cars in engines to pull parts given my money to lying mechanic shopes and at end of my rope can't find trusting folks except for your vids I'm more at ease thanks
I can't get mine to go back together so that's cool lol
I'm about to do the same thing to my 91 because my ignition is stuck on also. What's the name of that copper pin piece you removed that broke next to the ignition cylinder? Just in case mine is broken also
Mine did break and have no idea wtf it’s called.
Mine also broke, no idea what it's called or how to look up a replacement part.
I think it’s called TURN SIGNAL CANCELLING CAM
I have the skills but not the tools. How much should it cost to have someone replace my switch? Been getting quotes of $300.00+ to replace a $35.00 part.
🤔that does not look like a 6l80 😉
Good job on that.
Lol you sir are correct lol I've got some fun videos coming very soon for you 😜
@@expressautotransmissiondav4207 you killed that swap in less then 20 mins. You the man buddy
Not sure if anyone will ever reply to this, but i am hopeful if so its soon. my 94 gmc k1500s ignition cylinder is loose, its seems the gearing and action behind the cylinder is broke and or loose. if anyone knows of a website/diagram/video that would help me out please let me know! thanks in advance everyone.
That's the ignition lock cylinder the ignition switches down further
That’s the ignition lock cylinder not ignition switch
For those of you who don’t have a puller just smack the side and rattle it and it will come off no problem
That is the lock cylinder, not the ignition switch.
Right!
I know ! All the people misleading me in the titles !
He's a Joe Biden loving gun banning clown.
Everyone: Boo this man!
I learned something today🤣🤣 no shame
So it's a six pack job.
Why do I feel like he didn't go get the torque wrench 😂
You ain't lived until you have to tighten the loose bolts for the tilt steering 🤔
Bahahhahahahha such a fun experience 🤣🤣🤣
2😂
guess what I am doing today truck tried starting by itself
Why do people call these ignition switches. It is NOT a ignition switch. It a lock cylinder. The ignition switch is under the dash mounted on the column…
If your replacing lock cylinder then just say so. The ignition switch is on the column under the dash!
Great camera angle.. only surpassed by list of tool list and best of all..the great chatter