2013-2016 Ford Escape Serpentine Belt And Tensioner Replacement How To DIY

This 2014 Ford Escape is getting a new serpentine belt and tensioner.
🛒PARTS LIST:
▪️ Belt tensioner: amzn.to/3ybc8s9
▪️ Serpentine belt: amzn.to/4df0zPt
▪️ Thread locker: amzn.to/491k78u
🛒TOOLS NEEDED:
▪️ Electric ratchet: amzn.to/3Sw4W12
▪️ Flex head ratchet: amzn.to/47PZwm7
▪️ Impact socket set: amzn.to/3Hy3fKi
▪️ Impact wrench: amzn.to/3Sfmiht
▪️ Prybar set: amzn.to/3IkSlWw
▪️ Ratcheting wrench set: amzn.to/48NM974
▪️ Socket and wrench set: amzn.to/4b6K8ob
▪️ Torque wrench 1/2: amzn.to/3AgaOB2
▪️ Torque wrench 3/8: amzn.to/48pwSbM
▪️ Torx bit set: amzn.to/4b5WUTQ
😎If this video has been helpful consider supporting us with a cup of coffee! 🙂
www.buymeacoff...
➡️I am part of the Amazon affiliate program and get a small commission when purchases are made through the links provided.
🔺DISCLAIMER
The information provided by Valley Mobile Automotive (“we,” “us” or “our”) on this video is for general informational purposes and entertainment only and does not replace professional advice.
All information is provided in good faith; however, we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on the video.
By working on your own vehicle, you take responsibility for the outcome.
Under no circumstance shall we have any liability to you for any loss or damage of any kind incurred as a result of the use or reliance on any information provided on this channel. Your reliance on any information on the videos on this channel is solely at your own risk.

[@BrianTheTrader]

FWIW, I think this is easier on the 2.0L engine. I'm about to do this job, but I don't think you need to remove the engine mount on that one. There are 2 belts in that car and you have to remove both for the job.