Mark, So the biggest log i ever moved was also a HUGE White Oak. Back in about 1994 I was hauling Timber out of the Midland,Pa area (Down there near you guys) And on the North side of town, Up on that hill that over looked the City Park. Back up on that hillside that faced the SE, Here stood this MONSTER White Oak that had been hit by lightning on one of the 3 large upper branches. There where a total of 4 large White Oaks up there within about 25 yrs of this monster, That where likely seedlings off this old oak and they where probably 100-120 yrs old then according to the Arborist that the City hired. And his advice was to remove this larger damaged tree and let the 30+ smaller trees get some sun. The Arborist figured that old tree was somewhere between 220-228 yrs old at the time. The first 2 logs where taken out of the woods at 26 ft. The butt log was egg shaped and at the narrowest point was 63". They cut it in half at the landing. And we chained it the the Prentice Loader and lifted the end up and had the shudder push each log up on to the rear of the trailer. I check to see what the guage said with just those to logs on it. And it was just under 10-K lbs. I got that whole tree loaded on the truck. And had just about 44-K from just that one tree. There was some Popular in there that where in the 40" class. And some Red Red Oak that made Vener grade logs. I wish I had taken pictures of that job. 1994 was long before cell phones with a camera.
Drama at the circle mill.... Thanks Mark, after seeing a video like this one I understand your appreciation of smaller, boring logs. Thankfully you team were able to demonstrate man-handling logs without getting hurt. Wishing you and your team a great weekend holiday with family and friends. Peace brother
Hey Guys! Absolutely amazing! I taught Jr. and Senior HS from 1975 to 1980. Two Families owned Saw Mills, they were brothers. They had walnut for plaques and Pine for pallets. I was there! Amazing! They were not as big as YOU but I did NOT know much about sawing. I AM Amazed! I loved to watch them and love to watch you all! Thank You!
Way to go Mark. That was an excellent demonstration of a superb Sawyer. What a beautiful log and you with your talents got the best out of it. Stay safe and God bless. 🇨🇦✌️
There was so much in this video which gave credible reason why you make stop signs while cutting large diameter logs. Great video Mark! Keep up the good work. And prayers for you and your eye issue.
I'm not criticising. I'm merely pointing out best working practice. The working practice there would not be tolerated in the European Union. Shop would be shut down due to lack of Health n Safety.
Wow! Strength and endurance are impressive in the guy splitting that log. Outstanding video on quarter sawing with a circular saw. It's easy to see why quarter sawn oak is scarce and expensive.
Hi Mark, great video. Thank you. Even when you have a difficult extra larger log, follow the process. It works every time. If a curly situation arises, adapt the process. A great video to wake up to and provide a positive start to the day. Thank you
I am up in north Canada. Used a lister diesel to saw small sized logs with the belt twist from motor to blade. Each log you saw, I smell that, and a sawmill smell, well, it's Awesome.
That was always my favorite part when I sawed. The unexpected lol. Yes you have to stay calm at all times. You men did a fine job. Thanks for sharing the video.
If you could put 4 flats on a log like that, then take it off the mill and make squarish like quarters you could turn the quarters to saw the quartered faces, but still lots of waste and extra effort. You still made some nice lumber. We appreciate you guys!
My grandfather established a sawmill and handle factory here in Queensland Australis long before I was born in 1964. My Father was employed by him just after he came out of Natioanl Military service in the Royal Australian Airforce. Theres an old photo of my father and crew setting up a Canadian Sawbench. It would have been pre 1960. He eventually met my mother at church and we all grew up, 11 of us, with timber in our blood. My father was a timber getting supervisor and on school holidays, I often went bush with him in South East Queensland to open gates for him as he wrangled the crews. They were great guys and taugt me a lot of stuff about life etc. Well, inspired by that, I have had a very successful career as a surveyor. I am never happier than when I'm in or near good timber country and its an absolute delight to see folk working logs into good building materials. Timber is sustainable. It locks up carbon for a very long time. The environment where timber grows supports habitat for all manner of critters. For timber, we take the upper story an pioneer species flourish below. Then the next generation of millable timber comes along and the cycle begins again. Love your work guys! Very special and memorable for me. I've been a surveyor for 43 years but sawmilling always grabs my attention. KEEP UP THE GREAT WORK!
Hearing protection sir. >=85dba single hearing protection. >95dba, dual hearing protection. Add to that, eye and hand protection. It's a choice, but we need only ask ourselves what our next long weekend or holiday with family would be like without hearing, sight, or a hand. It's a choice we make.
Cutting a log open is just like having Christmas morning! Each new board is a gift; it might be great or it might be a bit of a disappointment. Excellent video, fellas!!!
I have been watching you guys cut logs for a while now. I really like seeing the way you work! Keep up the great work. I hope your eye heals fast Mark!
Mark, I had detachments in both eyes, one in 1972 another in 1973, the '72 detachment left me completely blind. Both repaired and have had no problems. Have yearly check-ups. Good luck to you .
😱 That was quite a shocker respectively frightening. I was happy to see that nothing got damaged. 2) Strangely I let myself distract by the two discolorations on the blade. 3) You are absolutely right, shaping down a big log with the sawmill is better. By the way: Nice to hear that your eye is better. Best regards, luck and especially health to all involved people.
First time watching your channel. Really nice. My dad and I used to go up to a saw mill in KY and pick up a truck load every year. They would invariably have one bent tooth in their blade which left saw marks so bad that you had to take another quarter off when planing .
Ten o’clock in the morning brew time bacon buttie and watching you guys , split logs for the mill as an apprentice Sthil 090 saw fourty odd inch bar made you sweat, hope the eye gets better soon todays job making square nuts 7/8 whitworth thread for a vintage machine you need a big spanner , thems nice boards coming off the mill you guys have a nice day
We used to go to the saw mill up in Ft. Bragg , Ca. A couple times a year, I would watch the guys work at the mill for hours, I really enjoyed it. So much work, and hard work. So I am enjoying watching you.
Ft. Bragg, CA brings back fond memories of a lady I met there. We spent three days together back in 2004 and I will never forget her. Never saw her again.
I think that was a job well done, the timber sure did look good, I hope you folks find your market for this wood, I think it will make great furniture wood.
Six retinal detachments later, lasers, needles in the eyes, but thank God if only lost some peripheral vision downwards. Some unlucky people wake up and realise they are blind withe the retina fully detached. Never ever ignore the incredible blackness rolling up or down like a blind, usually preceded by lots of black floaters. Mine were attributed to my motor sports history banging my head around in a rally car years ago. Take care and no rapid head movement from now on, and good luck with it all. Great videos, good commentary too, somehow relaxing in a strange way.
Well, you win! I’ve only had 4 LOL! Two in each eye, first one when I was 16 in 1978. That one cost me most of the vision in my right eye. Technology back then wasn’t what it is today. The surgery’s have come a long way since then.
I enjoy watching you guys work, turning logs to lumber i also saw the safety guy on the light guard you need to have a talk whit Sammy to stay safe , HAVE a GRATE WEEKEND PS hope your eye is healing fine GOOD DAY
Glad you're doing better and when my eyes get dilated it looks like an ice storm to me. There's GOT to be safety at a mill or a lot of funerals and/or trips to the E.R. And it don't take all day for something to fly all to flinders. Happy weekend and God Bless
Little bit of pyrodex makes that job much more enjoyable. I split our oversized logs in a similar way except after the score cut I drive 2 slats about 4 " apart. Pour some in. Drop a wick in. Then I drive another 4" long slat to plug the hole. Done rite it will pop em rite in two wo any damage. I have tried it wo a score cut, just using a plunge cut and natural seams. With good outcomes. Made splinter piles out of a few learning though lol
Swinging in an arc. I learned that driving spikes on a drag line rail track. Works good so no real lifting of the hammer head. He’s a real expert at it.
When I was little boy, now 71 years of age, I use to go with my uncles to the saw mill above our town. It was a really large mill that only cut pine that was hauled from all over the county of Fairfield in South Carolina. I remember a 671 Detroit running the mill. Next to the mill was a small gully where they ran the saw chain to carry the saw chips. I remember that saw mountain about 50 or more feet high and we loved to play on that saw dust pile. When the mill was running, you could hear it for a long way off. About one mile from my house now through the woods is a family run mill that is very old. Still running every day sawing rough pine lumber. Not much oak. They used to have an M&M gas engine running the mill. Finally moved to electric and still running the circular blade.
I am sure the electric motor is much more efficient as per fuel handling and maintenance on the engines. The guy that runs the mill near my house is of a different bread. lol. His daddy built a farm way back when it was country. He raise cows and hogs. He also has a lot of land not far from the farm where they grow extra corn and hay. The saw mill was another way to make money and most of the lumber is sold to locals. Most is southern yellow pine. The older dad a few year back and his only son now runs the farm and mill. The son, also has an agriculture degree from Clemson. He lives in the family farm house that he has totally renovated. Two story big house sitting the hill surrounded by 150 acres of pasture and now subdivisions. Country in town. The mill is still in the same place it is was when first built. In a hole with NO room for trucks to come and go. About 20 yards from the mill is pasture land flat and pretty. I ask him why he does not move the mill to the pasture. He said his daddy told him to over move the mill as it was not easy to set up. This boy is loaded with money and could easily purchase a new mill. But he is content and country as hell. lol A good old boy but stubborn as a muslim. @@Mutlap
I had a detached retina on a Friday emergency surgery repair following Tuesday the other one went worst time most invasive painful procedure I’ve ever been through if it hasn’t happened to you you can never understand. Glad you’re ok. Love your channel and your mill. I found you from Andruw 👍
Mark you should explain about the figures in 1/4 sawn and how veneerers love them, nasty felling shake but you handled it well. thank's for another good video!
Great video Mark and Eddie and ZZ Mark, the grain on those boards looked stunning for furniture. Hope all goes well for you when you go back to the hospital, here's to a speedy recovery. Take care.
Nothing to be sorry about!!! He should just pay attention to the fascinating sawing process rather than criticizing the narration. Great video guys, you work hard at making it look easy!!!!!
hay Mark I like your setup and love these type of sawmills. wish you were local to me here in Michigan I'd run out there for a bit and see your setup up close and chat about buying logs from me thanks and be safe
...Disclaimer...I am not a "lumber man", I have no expertise in running an operation such as yours...But...what I saw (unintentional funny) when you first split the log with the chain saw, was the outcome it would have when running it through the main saw. I do not know if you would do this on a majority of your trees, or any, or just this once for this video. As you split the log initially with the chain saw, you lost several cuts out of the middle of the tree, due to the need to true the faces of that log, before you could get any "boards".. There should certainly be another way, that is much more precise, to prevent this, if and when you find the need to utilize the chain saw operation............I enjoyed the video and want to thank you for this production...blessings to you all....
i have even less experience than you, Johncollins, but I agree! Then they put the first half on the mill, and wasted the first three boards! I would have thought that, seeing as how they were dealing with the money part of the log, they would have squared the log up after the first skim cut, and left the unevenness for the sapwood at the tail of the process!
I watch nuts319 video and yours. What I liked is eyes on each other while the work is going on. Me being retired firefighter/ paramedic before I retired was the safety officer. So checking on work in a dangerous place. When Pete was cutting at least 2-3 people were watching him. In the mill I see at least two people eyes on when the log started to break loose. Everyone did what they needed to do. Great work and everyone goes home safe.
worked for a sawmill in adams ville tn. we had a 8 foot butt cut white oak . we drilled a hole in the middle and used a 1/4 stick tnt to blow it in two 4 peaces so it would fit on our sawmill
I love watching guys work while I sit here with a cocktail.
that sounds good!
Mark, So the biggest log i ever moved was also a HUGE White Oak. Back in about 1994 I was hauling Timber out of the Midland,Pa area (Down there near you guys) And on the North side of town, Up on that hill that over looked the City Park. Back up on that hillside that faced the SE, Here stood this MONSTER White Oak that had been hit by lightning on one of the 3 large upper branches. There where a total of 4 large White Oaks up there within about 25 yrs of this monster, That where likely seedlings off this old oak and they where probably 100-120 yrs old then according to the Arborist that the City hired. And his advice was to remove this larger damaged tree and let the 30+ smaller trees get some sun. The Arborist figured that old tree was somewhere between 220-228 yrs old at the time. The first 2 logs where taken out of the woods at 26 ft. The butt log was egg shaped and at the narrowest point was 63". They cut it in half at the landing. And we chained it the the Prentice Loader and lifted the end up and had the shudder push each log up on to the rear of the trailer. I check to see what the guage said with just those to logs on it. And it was just under 10-K lbs. I got that whole tree loaded on the truck. And had just about 44-K from just that one tree. There was some Popular in there that where in the 40" class. And some Red Red Oak that made Vener grade logs. I wish I had taken pictures of that job. 1994 was long before cell phones with a camera.
Drama at the circle mill.... Thanks Mark, after seeing a video like this one I understand your appreciation of smaller, boring logs. Thankfully you team were able to demonstrate man-handling logs without getting hurt. Wishing you and your team a great weekend holiday with family and friends. Peace brother
thank you , great comment.
I know alot of people think boring , but I love to watch it, since I am an arborists, past 30 years ,
Hey Guys! Absolutely amazing! I taught Jr. and Senior HS from 1975 to 1980. Two Families owned Saw Mills, they were brothers. They had walnut for plaques and Pine for pallets. I was there! Amazing! They were not as big as YOU but I did NOT know much about sawing. I AM Amazed! I loved to watch them and love to watch you all! Thank You!
Way to go Mark. That was an excellent demonstration of a superb Sawyer. What a beautiful log and you with your talents got the best out of it. Stay safe and God bless. 🇨🇦✌️
thanks Doug.
There was so much in this video which gave credible reason why you make stop signs while cutting large diameter logs. Great video Mark! Keep up the good work.
And prayers for you and your eye issue.
I love quarter sawn wood 🇨🇦
It’s always a pleasure to look at, and work with.
i have cut alot of logs and you do a great job of reading each log cheers from BC Canada
thanks Keith.
Good to know your eye is doing good. Stay safe and may GOD bless.
thanks Robert.
Who the hell would have anything bad to say about these videos nice work. Learned allot. Thank You💪💪
Don't get too hung up on your critics!!😂😂 we love your videos!!
thanks .
I'm not criticising.
I'm merely pointing out best working practice.
The working practice there would not be tolerated in the European Union.
Shop would be shut down due to lack of Health n Safety.
Wow! Strength and endurance are impressive in the guy splitting that log. Outstanding video on quarter sawing with a circular saw. It's easy to see why quarter sawn oak is scarce and expensive.
Hi Mark, great video. Thank you. Even when you have a difficult extra larger log, follow the process. It works every time. If a curly situation arises, adapt the process. A great video to wake up to and provide a positive start to the day. Thank you
thanks Patrick.
This was interesting. Quarter sawn creates challenges for round saws is no joke.
Thanks for sharing.
thanks Joe , that's why we don't quarter saw on this mill.
Nice Milling getting the quarter sawing done, and nice work splitting that white Oak log.
thank you.
I am up in north Canada. Used a lister diesel to saw small sized logs with the belt twist from motor to blade. Each log you saw, I smell that, and a sawmill smell, well, it's Awesome.
That was always my favorite part when I sawed. The unexpected lol. Yes you have to stay calm at all times. You men did a fine job. Thanks for sharing the video.
thanks Jeff.
Mark, very impressive videos, thank you very much!!!!
Excellent learning experience. Thank you.
thank you.
If you could put 4 flats on a log like that, then take it off the mill and make squarish like quarters you could turn the quarters to saw the quartered faces, but still lots of waste and extra effort. You still made some nice lumber. We appreciate you guys!
My grandfather established a sawmill and handle factory here in Queensland Australis long before I was born in 1964. My Father was employed by him just after he came out of Natioanl Military service in the Royal Australian Airforce. Theres an old photo of my father and crew setting up a Canadian Sawbench. It would have been pre 1960. He eventually met my mother at church and we all grew up, 11 of us, with timber in our blood. My father was a timber getting supervisor and on school holidays, I often went bush with him in South East Queensland to open gates for him as he wrangled the crews. They were great guys and taugt me a lot of stuff about life etc. Well, inspired by that, I have had a very successful career as a surveyor. I am never happier than when I'm in or near good timber country and its an absolute delight to see folk working logs into good building materials. Timber is sustainable. It locks up carbon for a very long time. The environment where timber grows supports habitat for all manner of critters. For timber, we take the upper story an pioneer species flourish below. Then the next generation of millable timber comes along and the cycle begins again. Love your work guys! Very special and memorable for me. I've been a surveyor for 43 years but sawmilling always grabs my attention. KEEP UP THE GREAT WORK!
Enjoyed the video guys. Good to see something different and some of the things that can go wrong.
thanks Graham.
Mine detached for no reason too Mark. But it's fine now. Glad your follow up went well! Thanks for the update! Be well
thank you.
One awesome show, never seen this done before, thanks for sharing !!
thanks carl.
when i was a teenager my dad and I split white oak logs to make fence post. none were nearly as big as that monster thankfully.
locust post?
I keep watching these! Why? It is just fascinating to me.
People are irritated about everything it seems. I watch to see some of the gorgeous wood. like the cherry
Hearing protection sir. >=85dba single hearing protection. >95dba, dual hearing protection. Add to that, eye and hand protection. It's a choice, but we need only ask ourselves what our next long weekend or holiday with family would be like without hearing, sight, or a hand. It's a choice we make.
Mark i love the show,im disabled not able to work anymore .i really enjoy seeing how its really done.
Get well soon, Mark. Hopefully your vision hasn't been affected. Love the boom!
Another "goody" !!
Cutting a log open is just like having Christmas morning! Each new board is a gift; it might be great or it might be a bit of a disappointment. Excellent video, fellas!!!
Real nice creative sawing to find a few good boards out of that last quarter log.
thanks.
I have been watching you guys cut logs for a while now. I really like seeing the way you work! Keep up the great work. I hope your eye heals fast Mark!
That was nice lumber but a pain to saw you had a problems but solved them guick nice job keep up the good work thanks for sharing.
Chasing the tiger . Love the grain and stability . Got a 32” red oak. Going to saw it same way . Keep it real. Hope eye heals up soon .
Mark, I had detachments in both eyes, one in 1972 another in 1973, the '72 detachment left me completely blind. Both repaired and have had no problems. Have yearly check-ups. Good luck to you .
thanks Allen.
Hope Sammy Safety enjoyed ride. Have a great day Guys
thanks Jack , he sure did lol.
Very interesting video Mark. Loved the quarter sawing, that's some beautiful wood. Fun to try different techniques
thanks William.
Man that's some nice looking wood coming from that log. White oak was one of my favorites to work with...and cherry.
I love to see fresh cut white oak. My favorite hardwood. That is a nice looking stack of oak.
😱 That was quite a shocker respectively frightening. I was happy to see that nothing got damaged. 2) Strangely I let myself distract by the two discolorations on the blade. 3) You are absolutely right, shaping down a big log with the sawmill is better. By the way: Nice to hear that your eye is better.
Best regards, luck and especially health to all involved people.
thank you , great comment.
Good Luck! And I hope your EYE keeps getting Better! Keep it UP! John
First time watching your channel. Really nice. My dad and I used to go up to a saw mill in KY and pick up a truck load every year. They would invariably have one bent tooth in their blade which left saw marks so bad that you had to take another quarter off when planing .
Ten o’clock in the morning brew time bacon buttie and watching you guys , split logs for the mill as an apprentice Sthil 090 saw fourty odd inch bar made you sweat, hope the eye gets better soon todays job making square nuts 7/8 whitworth thread for a vintage machine you need a big spanner , thems nice boards coming off the mill you guys have a nice day
We used to go to the saw mill up in Ft. Bragg , Ca. A couple times a year, I would watch the guys work at the mill for hours, I really enjoyed it. So much work, and hard work. So I am enjoying watching you.
Ft. Bragg, CA brings back fond memories of a lady I met there. We spent three days together back in 2004 and I will never forget her. Never saw her again.
I enjoy your vids - so normal, natural.
If it was easy everyone would want to do it! Nice too see quarter sawn that wide AWESOME Stick of lumber
I think that was a job well done, the timber sure did look good, I hope you folks find your market for this wood, I think it will make great furniture wood.
Six retinal detachments later, lasers, needles in the eyes, but thank God if only lost some peripheral vision downwards. Some unlucky people wake up and realise they are blind withe the retina fully detached. Never ever ignore the incredible blackness rolling up or down like a blind, usually preceded by lots of black floaters. Mine were attributed to my motor sports history banging my head around in a rally car years ago.
Take care and no rapid head movement from now on, and good luck with it all.
Great videos, good commentary too, somehow relaxing in a strange way.
Well, you win! I’ve only had 4 LOL! Two in each eye, first one when I was 16 in 1978. That one cost me most of the vision in my right eye. Technology back then wasn’t what it is today. The surgery’s have come a long way since then.
thank you , this is my second time for my right eye.
That could have gone horribly wrong real quick. Good job Mark! You can't buy experience.
thank you.
Looks like somebody is going to get some pretty furniture. Glad to hear your eye is recovering.
thanks Jerry.
Like your videos. I'm an amateur. So no criticism here. I just watch and enjoy.
Congratulations on 69K! Good news on your eye!! As always a 😎😎😎😎Video!
thank you.
I enjoy watching you guys work, turning logs to lumber i also saw the safety guy on the light guard you need to have a talk whit Sammy to stay safe , HAVE a GRATE WEEKEND PS hope your eye is healing fine GOOD DAY
thank you.
Glad you're doing better and when my eyes get dilated it looks like an ice storm to me. There's GOT to be safety at a mill or a lot of funerals and/or trips to the E.R. And it don't take all day for something to fly all to flinders. Happy weekend and God Bless
thanks Lewie.
U 2, Uncle Popeye!@@markgalicic7788
Congratulations, finally after all this years a quarter sawn oak
thanks.
Good job. You guys are pros. Experienced.
thanks Richard.
Enjoyed watching been watching for years thank you hope your eye gets better.😊😊😊
Fun to watch good old boys just getting it done!
A chunk of that beauty would have made a great mantle piece for my fireplace. Delicious.
Little bit of pyrodex makes that job much more enjoyable. I split our oversized logs in a similar way except after the score cut I drive 2 slats about 4 " apart. Pour some in. Drop a wick in. Then I drive another 4" long slat to plug the hole.
Done rite it will pop em rite in two wo any damage.
I have tried it wo a score cut, just using a plunge cut and natural seams. With good outcomes. Made splinter piles out of a few learning though lol
Dude twirling that 10# sledge like a toy. That’s real work.
Swinging in an arc. I learned that driving spikes on a drag line rail track. Works good so no real lifting of the hammer head. He’s a real expert at it.
Love watching the good...the bad and the ugly👍
Nice to see you are such good sport to the eye issues.
thanks.
Good evening from Lincolnshire UK. Pleased you are on the mend Mark.
good evening andrew.
I know you say you don’t like to quarter saw logs. But is sure is pretty!
I love how the gnome went along for the ride. :D
Enjoy watching you guys
I think you’re doing a great job for the responsibility you have🎉
thanks Jerry.
When I was little boy, now 71 years of age, I use to go with my uncles to the saw mill above our town. It was a really large mill that only cut pine that was hauled from all over the county of Fairfield in South Carolina. I remember a 671 Detroit running the mill. Next to the mill was a small gully where they ran the saw chain to carry the saw chips. I remember that saw mountain about 50 or more feet high and we loved to play on that saw dust pile. When the mill was running, you could hear it for a long way off. About one mile from my house now through the woods is a family run mill that is very old. Still running every day sawing rough pine lumber. Not much oak. They used to have an M&M gas engine running the mill. Finally moved to electric and still running the circular blade.
energy cost comparison between the two. The main reason for switching I can guess there are many reasons but I would like for you to tell me.
I am sure the electric motor is much more efficient as per fuel handling and maintenance on the engines. The guy that runs the mill near my house is of a different bread. lol. His daddy built a farm way back when it was country. He raise cows and hogs. He also has a lot of land not far from the farm where they grow extra corn and hay. The saw mill was another way to make money and most of the lumber is sold to locals. Most is southern yellow pine. The older dad a few year back and his only son now runs the farm and mill. The son, also has an agriculture degree from Clemson. He lives in the family farm house that he has totally renovated. Two story big house sitting the hill surrounded by 150 acres of pasture and now subdivisions. Country in town. The mill is still in the same place it is was when first built. In a hole with NO room for trucks to come and go. About 20 yards from the mill is pasture land flat and pretty. I ask him why he does not move the mill to the pasture. He said his daddy told him to over move the mill as it was not easy to set up. This boy is loaded with money and could easily purchase a new mill. But he is content and country as hell. lol A good old boy but stubborn as a muslim. @@Mutlap
Hello Mr. Mark,Texas Tim here hope U-All have a great Labor day
thanks Tim , you too! Hope to see you soon!
POop on the nay sayers, You guys are doing a great job! Tough job you guys do. And you do it well! Thanks for your videos. They make me happy!
thanks Tim.
I had a detached retina on a Friday emergency surgery repair following Tuesday the other one went worst time most invasive painful procedure I’ve ever been through if it hasn’t happened to you you can never understand. Glad you’re ok. Love your channel and your mill. I found you from Andruw 👍
oh dear, keep that guy away from the chainsaw. He just butchered that log!
That sure is a good cutting saw!
good to see the two flags flying, along with the others. Merica!
Mark you should explain about the figures in 1/4 sawn and how veneerers love them, nasty felling shake but you handled it well. thank's for another good video!
thanks John , great idea.
Great video Mark and Eddie and ZZ Mark, the grain on those boards looked stunning for furniture. Hope all goes well for you when you go back to the hospital, here's to a speedy recovery. Take care.
Nothing to be sorry about!!! He should just pay attention to the fascinating sawing process rather than criticizing the narration. Great video guys, you work hard at making it look easy!!!!!
thanks Dennis.
I really enjoy the videos! God Bless
hay Mark I like your setup and love these type of sawmills. wish you were local to me here in Michigan I'd run out there for a bit and see your setup up close and chat about buying logs from me thanks and be safe
Nice first quarter log roll onto the carriage
thank you.
❤️💙 I love watching these videos 💚💜
It's Winker Galicic ! 😉
p.s. Best wishes for a speedy (eye) recovery Mark!
thank you.
A very worthy log for quatersawing!!
You all are Masters of wood cutting
Nuts319 has a good sledge hammer swing
yes he does very strong.
@@markgalicic7788 that swing that nuts319 uses is good way not to tire yourself out fast
If John Henry would have used that swing against the steam-powered drill his heart would not have quit. Excellent job.
Best sawmill channel on RUclips.
hi there good sawing . john
thanks John.
Mark I hope you get well soon. I'm a diabetic also and it's not easy so please take care of yourself and keep up the good work ❤
thanks Harriet.
...Disclaimer...I am not a "lumber man", I have no expertise in running an operation such as yours...But...what I saw (unintentional funny) when you first split the log with the chain saw, was the outcome it would have when running it through the main saw. I do not know if you would do this on a majority of your trees, or any, or just this once for this video. As you split the log initially with the chain saw, you lost several cuts out of the middle of the tree, due to the need to true the faces of that log, before you could get any "boards".. There should certainly be another way, that is much more precise, to prevent this, if and when you find the need to utilize the chain saw operation............I enjoyed the video and want to thank you for this production...blessings to you all....
i have even less experience than you, Johncollins, but I agree! Then they put the first half on the mill, and wasted the first three boards! I would have thought that, seeing as how they were dealing with the money part of the log, they would have squared the log up after the first skim cut, and left the unevenness for the sapwood at the tail of the process!
Gotta side with you on this one.
80.5K subscribers as of March 18 2024. Nice work!
I watch nuts319 video and yours. What I liked is eyes on each other while the work is going on. Me being retired firefighter/ paramedic before I retired was the safety officer. So checking on work in a dangerous place. When Pete was cutting at least 2-3 people were watching him. In the mill I see at least two people eyes on when the log started to break loose. Everyone did what they needed to do. Great work and everyone goes home safe.
Hope all is well with your eye....good video! One Yinzer to another.....Go Stillers.
worked for a sawmill in adams ville tn. we had a 8 foot butt cut white oak . we drilled a hole in the middle and used a 1/4 stick tnt to blow it in two 4 peaces so it would fit on our sawmill
Eddie & I use black powder with cannon fuse.
Watching that guy cut hardwood with that "left coast" softwood saw was almost painful.
Watching that guy trying to cut anything is almost painful.
Out of that first huge log quarter....you yielded exactly one quartersawn board..
thank you for the video. good one! i've sawn logs in half with a chainsaw too. good idea.
The second quarter also yielded one usable quartersawn board. Put most of the quality into 4and5inch flat sawn....or into the slabwrack
Excellent work! thank you!