This is why pollution is so bad these days, uncontrolled emissions and water getting contaminated then running into rivers and the oceans. But I'm told my 10 year old diesel Car is the reason, and that's why I get taxed to death....😠
Denkst du, dass wir in westlichen Industrieländern wirklich verstehen, wie hart solche Bedingungen sind? Was denkst du, würde sich unsere Sichtweise ändern, wenn wir selbst solche Arbeitsplätze ausprobieren müssten?
I work in a steel mill now for 30 years and we do everything from producing raw iron to high-end cold rolled flat steel for several big players in the car industry. And yes we produce long stripes like this too on 3 big machines build in the 60s and 70s and what I see here is absolutely idiocracy. Dangerous? Leathel accidents are not a question. The complet handling, of the material and machines, is absolutely dangerous!
I worked in a slitter factory, we would get a master coil from the mill and slit it just like the video. There are SO SO many things wrong in this video. Ignorance is bliss 😂
@iamgriff such a handling and safety ignorance is more 1890. Our integrated chopping and splitting workshop was build in the 60s and 70s, the main cold rolling facility with four waltz stands in the 70s but even there the, before the fall of the wall, the standards were high.
@@nidhoggvomwalde2280 Our plant was the same, steel toes, hard hats, glasses, even Kevlar sleeves. lol you see these guys burn off the 1 1/4” banding? I died laughing thinking how much easier our life was with a signode cutter
@@nidhoggvomwalde2280 you sir are exactly correct. The reasons for this squalor is Aa caste system in which the poor classes have no chance of working their way out of the situation. Most of these shops are family owned The child isn’t allowed to attend school. They start working in the shop at an early age and stay there. As they gain experience, they move up the ladder of less difficult work. I think the worst jobs are those that break ships. It’s way worse than these shops.
@@TwoHeartedSpider I think the standards of what we think in the west as clean is totally different than what the lower class and poor Afghanistan or India or Pakistan or any of the stands. Think that clean is look at that place that’s dirty floor. They don’t have clean clothes they don’t wash their clothes. There’s nothing about that place that’s clean and will never be clean. ':-
Warum glaubst du, dass saubere Arbeitsplätze wirklich so schwer zu erreichen sind, selbst wenn die Arbeitsbedingungen hart sind? Könnte es vielleicht daran liegen, dass der Zeit- und Energieaufwand für Reinigung oft einfach nicht zur Verfügung steht?
When I see this type of work, the labor must be painstaking long and time consuming to do a lot of the most simplest things. That roll looks like it was sitting outside for a year
Индусы и Пакестанцы МОЛОДЦЫ !!!!!! нахрен технологию и чертежи давай делай всё от себя!!!!!Нахрен не нужна техника БЕЗОПАСНОСТИ!!!Вот что значит ВЫЖИТЬ в этом мире!!!!!!!
All that equipment is probably leftover from the Victorian era when Brittain was still boss there...that stuff first ran on steam, then converted to electricity but never ever cleaned since day 1 of production in 1870 or something...
That is exactly how they made nuts and bolts here in the USA 100 years ago for old steam engines. I worked on one, all the nuts and bolts were matched indiidually. Which no one realised when they took it apart for transport. When we reassembled the engine, we had major trouble getting nuts and bolts to match and fit well, as each one was a slightly different size.
Props to these guys, they likely made about 5 bucks a day but it was funny to see the similarities, the guy wrestling the drum and the fat guy in the clean dress standing there going 'it aint my job!'. a few times i had to wince when they were splitting the coils but i didnt see too many one handed workers. i think they keep the one pair of safety glasses in the front office along with the one blank accident report form. someone mentioned, nice 6s... i guess things changed since i was doing this we only had 5s back then. my job was the fco saw and i had a big panel, lots of flashing lights and knobs to turn which im still convinced did nothing other than make me look busy and these guys have a dirty greasy slide saw which no one gives a rats ass about. still a scary place. i know where concertina wire comes from, the scalf pit.
Металл проходит процесс травления в кислотной ванне, у нас на заводе было три травильные линии. Потом их заменили на одну современную, это чудо техники. Я иногда обслуживал их.
1. Вау! Некоторым перчатки и обувь дают ! 2. Печь на отработке заменяет санаторий. Он уже не понадобится. Э - экономия бюджета. 3. Ну, эти парни из ничего делают вещи, качество, конечно, не ахти. Не ноют, а работают трудолюбиво (?). Вот только ктото крепко бабосы имеет от экономии безопасности труда... Никуда рабство не делось, вот оно во всей красе. Живут ребята красиво, правда, не очень долго...
Так и должно быть. Люди живут во времена полной компьютеризации и автоматизации. 21-й век. Ручной труд полностью исключëн. Всë делают автоматизированые станки.
@@ВладимирСтукалов-д4еno. It shouldnt be like this. Just because they won't keep up with the rest of the world excuses shouldn't be made for them. It's a trash ass country
They didn’t saw it was pipe. It was tubing which in this case was square that was being produced. Even in this country round tubing is run through rollers to make it square or rectangle.
Sin zapatos de seguridad, sin cascos de seguridad, sin ropa adecuada para éste tipo de trabajo, sin gafas de seguridad, fabrica con mucho desorden, sucias, piso de tierra, sin zonas demarcadas por dónde caminar, falta de protección en algunas maquinas, esta fábrica no esté siglo, es del siglo antes pasado, del 1800
Это старая о допотопная версия агрегата АПР ( агрегат продольной резки ) , а есть еще АПР (агрегат поперечной резки) , а так же станы горячего и холодного проката. Я на заводе работал, там гораздо совершеннее станы и агрегаты и сам на некоторых из них работал. Этот рулон металла прокатан на стане горячего проката.
Wenn ich die Halle am Anfang sehe... 😵💫😵💫😵💫 Und dann mit Sandalen rumlatschen...wie im Mittelalter 🧐 wer da arbeitet sollte vorher sein Testament machen ⚰️🪦
Я так понимаю, ,,Болт - Гайка,, не взаимозаменяемые . А с другой стороны, учитывая износ станочного парка, или сказать правильнее, абсолютная убитость, по другому и нельзя. М...да. Тяжёлое наследие колониальной эпохи. И тем не менее ядерное государство. Парадокс. И слава Богу, что на границе с Индией проводят только ,, Петушиные,, состязания - Кто выше забросит ногу. Да будет так !
This is why pollution is so bad these days, uncontrolled emissions and water getting contaminated then running into rivers and the oceans. But I'm told my 10 year old diesel Car is the reason, and that's why I get taxed to death....😠
Those of us in the West developed nations think we have crappy jobs…. Need to check this out.
Nothing a few tariffs can’t fix right?
Denkst du, dass wir in westlichen Industrieländern wirklich verstehen, wie hart solche Bedingungen sind? Was denkst du, würde sich unsere Sichtweise ändern, wenn wir selbst solche Arbeitsplätze ausprobieren müssten?
it's how we started off in the 1800's England too...no different.
These guys are getting ready for their ISO certification soon. Nothing like a guy wearing sandals handing a 20 ton spool of steel.
Please find me safety shoes that can handle 20 tons???
Now now... those are Safety Sketchers!
Very talented hard workers who remind me of Great Britain 200 hundred years ago. Full credit to you all from the uk 🇬🇧
This is these people’s way of life and normal for them. Why do all these arm chair experts feel they are so superior with all their comments?
Tu crois qu'ils ont choisi ce mode de vie pour que tu puisses passer ta vie a faire grossir ton cul dans un fauteuil ?
plus they physically work hard too,unlike us ,we never would.
Das kann nur ein Beutestück aus Deutschlands sein 😮😮
I guess they are working with what they have and creating value for the circumstances provided
I work in a steel mill now for 30 years and we do everything from producing raw iron to high-end cold rolled flat steel for several big players in the car industry. And yes we produce long stripes like this too on 3 big machines build in the 60s and 70s and what I see here is absolutely idiocracy. Dangerous? Leathel accidents are not a question. The complet handling, of the material and machines, is absolutely dangerous!
I worked in a slitter factory, we would get a master coil from the mill and slit it just like the video. There are SO SO many things wrong in this video. Ignorance is bliss 😂
@iamgriff such a handling and safety ignorance is more 1890. Our integrated chopping and splitting workshop was build in the 60s and 70s, the main cold rolling facility with four waltz stands in the 70s but even there the, before the fall of the wall, the standards were high.
@@nidhoggvomwalde2280 Our plant was the same, steel toes, hard hats, glasses, even Kevlar sleeves. lol you see these guys burn off the 1 1/4” banding? I died laughing thinking how much easier our life was with a signode cutter
@iamgriff a simple grinder or scissors...
Their life isn't worth a penny for their bosses. I hope it's not Mittal, I would die in shame.
@@nidhoggvomwalde2280 you sir are exactly correct. The reasons for this squalor is Aa caste system in which the poor classes have no chance of working their way out of the situation. Most of these shops are family owned The child isn’t allowed to attend school. They start working in the shop at an early age and stay there. As they gain experience, they move up the ladder of less difficult work.
I think the worst jobs are those that break ships. It’s way worse than these shops.
Nothing beats watching Aladdin and his crew make pipe while eating a bowl of chicken and broccoli.
I will never understand why being poor and/or working under harsh conditions prevents them from keeping your workplaces as clean as possible.
Well said sir.
@@TwoHeartedSpider I think the standards of what we think in the west as clean is totally different than what the lower class and poor Afghanistan or India or Pakistan or any of the stands. Think that clean is look at that place that’s dirty floor. They don’t have clean clothes they don’t wash their clothes. There’s nothing about that place that’s clean and will never be clean. ':-
Warum glaubst du, dass saubere Arbeitsplätze wirklich so schwer zu erreichen sind, selbst wenn die Arbeitsbedingungen hart sind? Könnte es vielleicht daran liegen, dass der Zeit- und Energieaufwand für Reinigung oft einfach nicht zur Verfügung steht?
Es cultural, al jefe tampoco le importa y considera una pérdida de tiempo y dinero implementarlo, al cliente tampoco le importa.
@@prinz10ga cleaning takes time and costs money..management (wrongly) will not spend it.
The guy on the power hammer was a true master.
The product may change, but the squalor is ALWAYS the same.
It’s amazing to me they never clean anything up and just throw things around ?
.
You can't expect anything else from people who eat on the floor!
When I see this type of work, the labor must be painstaking long and time consuming to do a lot of the most simplest things. That roll looks like it was sitting outside for a year
The basic design of this operation is that the cheapest, most expendable part is the men.
That was a MASSIVE power hammer holy
Looks like quite ordinary steel to me..
Temu quality
It is, far to rusty to be any grade of stainless.
Да ,это обычный низко углеродистый чермет.
Pundar has a lot of work with those keys to Aladdin's palace!
Nice 6-S work area. 👏👏
Gretta tumber need to see it ,
Индусы и Пакестанцы МОЛОДЦЫ !!!!!! нахрен технологию и чертежи давай делай всё от себя!!!!!Нахрен не нужна техника БЕЗОПАСНОСТИ!!!Вот что значит ВЫЖИТЬ в этом мире!!!!!!!
Ну все это до поры, до времени...
Okay, as long as this shit produced stays in these countries 😂😂😂
The guy moving the drum - dollies are affordable and worth having.
On those rough dirt floors?
Oh ! Hallelujah stainless still ...
All that equipment is probably leftover from the Victorian era when Brittain was still boss there...that stuff first ran on steam, then converted to electricity but never ever cleaned since day 1 of production in 1870 or something...
I think this is the most dirty factory I have ever seen...
Regards from Denmark
Ordinary steel mastered by exceptional men. 💜🙏🏼
That is exactly how they made nuts and bolts here in the USA 100 years ago for old steam engines. I worked on one, all the nuts and bolts were matched indiidually. Which no one realised when they took it apart for transport. When we reassembled the engine, we had major trouble getting nuts and bolts to match and fit well, as each one was a slightly different size.
Я тоже это увидил. Все болты с гайками уникальная пара.
Oh boy osha would have a blast inspecting that place. Wonder how many toes those guys have left. Insane conditions.
Props to these guys, they likely made about 5 bucks a day but it was funny to see the similarities, the guy wrestling the drum and the fat guy in the clean dress standing there going 'it aint my job!'. a few times i had to wince when they were splitting the coils but i didnt see too many one handed workers. i think they keep the one pair of safety glasses in the front office along with the one blank accident report form. someone mentioned, nice 6s... i guess things changed since i was doing this we only had 5s back then. my job was the fco saw and i had a big panel, lots of flashing lights and knobs to turn which im still convinced did nothing other than make me look busy and these guys have a dirty greasy slide saw which no one gives a rats ass about. still a scary place. i know where concertina wire comes from, the scalf pit.
Bravo........Square stock tubing......cheers
I didn't see the "How many days without an accident" sign.
I like their safety sandals, steel toe capped 😂
Das Gewindeschneiden Absolute Sahne Frei nach PASST WACKELT hat LUFT !
Dayummm, so this is hell?
Stainless does rust until passivation process. Phosphoric acid is usually used to make white rust. Ergo stainless steel.
Металл проходит процесс травления в кислотной ванне, у нас на заводе было три травильные линии. Потом их заменили на одну современную, это чудо техники. Я иногда обслуживал их.
C'est évident que la sécurité et la salubrité coûte moins cher que chez nous.
Mais leur salaire est aussi très bas
These guys are professionals. 😮 Was this slitter made in the 1800's?
со времен британской колонизации , и резаки и кузница
All these workers and companies think they are top of the line in the industrial field.
I've seen some old disused factories and ones about to be demolished. This factory is no different.
Old worn out equipment from China or Korea….1970s or earlier used in India or more likely Pakistan.
@@prinz10ga probably in Pakistan
там будут работать пока стены не упадут при землятресении
Rolling the roll Into another roll so the roll can get rolled Into another roll....
…with a new thickness… And…? A very normal process, but here manufacturing is on the level like a century ore more back in time.
I worked at a factory here in canton, Ohio that did exactly this a lot of differences for sure
Interesting...
It’s taliban stainless
1. Вау! Некоторым перчатки и обувь дают !
2. Печь на отработке заменяет санаторий. Он уже не понадобится. Э - экономия бюджета.
3. Ну, эти парни из ничего делают вещи, качество, конечно, не ахти. Не ноют, а работают трудолюбиво (?).
Вот только ктото крепко бабосы имеет от экономии безопасности труда...
Никуда рабство не делось, вот оно во всей красе.
Живут ребята красиво, правда, не очень долго...
слышь, иди ищи другой работа. у нас на селе ток это и лакокрасочное без респираторов!
Nice
why is everything so run down?
Cause they don't know how to clean and maintain things. Just how they are
Because it is Pakistan. Because it is Pakistan, everything was old and worn out to begin with.
@@walter9724 developing country= no regulations.
Так и должно быть. Люди живут во времена полной компьютеризации и автоматизации. 21-й век. Ручной труд полностью исключëн. Всë делают автоматизированые станки.
@@ВладимирСтукалов-д4еno. It shouldnt be like this. Just because they won't keep up with the rest of the world excuses shouldn't be made for them. It's a trash ass country
evidently this shop hasn't been in operation very long, there isn't that much garbage laying around
😂😂😂😂😂
saleeting prosses اس نوٹ good
👍🏻👍🏻👍🏻👍🏻
They burned anything toxic or Not
Just your normal non union factory in India or maybe Pakistan. What a dump!
Are there even unions in those countries?
@@HewhoPonders-kq4bxhell no
Are those STEEL TOE flip flops?
This isn't stainless steel.
this is stained steel
It's not even a factory.... more like Mordor....
Or the most
@@svenp.6725 Mordor 😂 My master bids thee welcome 😂😂
No stainless steel here.
Gud job
зашёл почитать камменты, ради веселья. курил. много думал... вобщем нифига не весело.
EPIs é coisa que nem sabem oque é pelo visto...
Какое затратное изготовление квадратных труб. Они так очень скоро разорятся!
👍
Talk about fly-by-night steel-making process! Obviously not in the U.S.
Where’s the stainless steel? All I’m seeing is big rolls of carbon steel.
Cutting metal with a welding rod keeps the metal from raveling?
Stainless steel does not cut with a torch thus using a welder.
@@Sillyturner A tool called a "nibbler" works great. It cheap and makes a neat cut.
All from scrap steel, they look like the steel rolls we made in Corby northants and Redcar in Scotland. Going through a slitting machine.
Oh and your pipe is square
They didn’t saw it was pipe. It was tubing which in this case was square that was being produced. Even in this country round tubing is run through rollers to make it square or rectangle.
❤❤❤❤❤❤ 🙏
what a dangerous and dirty workplace
Look at their ages…they can’t get young men to do anything either..
The amount of RUST!
This is why so much cheaper on items from india
Sir .. sir .. you have some rust stains on your stainless steel…
Lmfao
Çoookkk ilkel ve gei kalınmışlılık bi o kadarda çok tehlikeli bi çalışma şekli bence çalışanlara çok yazık çok 😟😯😟😟😢😢😔😔❤️❤️❤️🙏
Hey look, I found the bag of popcans someone stole off my deck.
Sorry.. wrong video.
Lot of rust on the ends when stacking there steel
And we drive electric cars
You should a process video on proper grammar.
They didnt have a clue about the loopstore?
How are the electrical wiring done 16:19 without the blue smoke getting out ?
That is not stainless steel, it's rusty
You have to wait for the counterfeit paperwork at the very end. Once it says 316, that's when the magic happens.
What a mess no tension on the strip
Sin zapatos de seguridad, sin cascos de seguridad, sin ropa adecuada para éste tipo de trabajo, sin gafas de seguridad, fabrica con mucho desorden, sucias, piso de tierra, sin zonas demarcadas por dónde caminar, falta de protección en algunas maquinas, esta fábrica no esté siglo, es del siglo antes pasado, del 1800
Last century was 1900 and it's all mid 1900s except workers were better dressed for the job.
And that’s how exhaust pipes are mfg.
из говна сделать конфетку а потом её сесть,и высрать потом сделать ещё одну конфетку!!"!!!!!БезОтходное ПРОеВОДСТВО !"!!!!!!
Le norme antinfortuniste non le conoscono. Con i sandali.
Pazzesco.
Plus dangereux que cette usine c est impossible
20:30 Stainless Steel my ass... 🙄
that stuff is just garbage. throw it over there in the corner
😛
Terrible.
Это старая о допотопная версия агрегата АПР ( агрегат продольной резки ) , а есть еще АПР (агрегат поперечной резки) , а так же станы горячего и холодного проката. Я на заводе работал, там гораздо совершеннее станы и агрегаты и сам на некоторых из них работал. Этот рулон металла прокатан на стане горячего проката.
Wenn ich die Halle am Anfang sehe... 😵💫😵💫😵💫 Und dann mit Sandalen rumlatschen...wie im Mittelalter 🧐 wer da arbeitet sollte vorher sein Testament machen ⚰️🪦
Жрать захочешь и голым там работать будешь 😅
This is MS ( Mild Steel) not Stainless Steel.
Я так понимаю, ,,Болт - Гайка,, не взаимозаменяемые . А с другой стороны, учитывая износ станочного парка,
или сказать правильнее, абсолютная убитость, по другому и нельзя. М...да. Тяжёлое наследие колониальной
эпохи. И тем не менее ядерное государство. Парадокс. И слава Богу, что на границе с Индией проводят только
,, Петушиные,, состязания - Кто выше забросит ногу. Да будет так !