Mass Production of LED Blub Holder || How TO Make a LED Blub Holder in Pakistan ||
HTML-код
- Опубликовано: 20 ноя 2024
- @techmanufacturer || #manufacturer #autoparts #smallbusinessmanufacturing #industrial #manufacturer #autoparts #industrialsolutions #industries #small_scale_business #smallbusiness #amazing #business #businessideas #viralvideo #viral #ledblubmanufacturing #techmanufacturer #ledblub
--------------------------------------------
Led Blub Holder Complete Process:
Creating an LED bulb holder with electroplating requires a few steps. Electroplating is used to coat the metal contacts of the holder to improve conductivity and prevent corrosion. Here’s a general guide:
Materials Needed:
1. LED Bulb - To understand the fitting requirements.
2. Metal Parts (e.g., copper or brass for contacts) - These will be electroplated.
3. Non-conductive Holder Base - For holding the metal contacts (e.g., plastic).
4. Electroplating Kit - Includes electrolyte solution, power supply, and plating metal (e.g., nickel or copper).
5. Wires - For connecting the LED to power.
6. Plastic Mold or Stand - To mount the metal contacts.
7. Drill - To make holes for mounting.
Steps:
1. Design the Holder:
Design the holder to accommodate the LED bulb’s shape and size.
Make sure to include slots or holes for wiring and metal contacts that will hold the LED in place.
2. Prepare the Metal Contacts:
Cut the metal to shape (often two small metal pieces for positive and negative contacts).
Clean the metal surfaces thoroughly to ensure proper electroplating adhesion. Use sandpaper or a cleaning solution to remove any oxidation or debris.
3. Electroplate the Contacts:
Set up your electroplating bath according to the instructions for your kit. Typically, this involves mixing an electrolyte solution that contains the metal ions you want to plate.
Attach one end of the contact to the positive side of a DC power supply and submerge it in the solution. Attach the plating metal to the negative side.
Turn on the power supply at a low voltage, and let the current run for several minutes to hours, depending on the thickness desired.
Rinse and dry the electroplated metal contacts.
4. Assemble the Holder:
Mount the metal contacts in the holder base, ensuring they align with the LED bulb’s terminals.
Secure the contacts with screws or glue, depending on the holder design and material.
Drill holes if necessary for wires to pass through.
5. Connect the Wiring:
Attach wires to the contacts, ensuring they’re securely connected for good conductivity.
Connect the other ends of the wires to a power source, considering the correct voltage and polarity for the LED bulb.
6. Test the Holder:
Place the LED bulb into the holder and test it by connecting it to the power source.
Check for a stable connection and bright illumination, which indicates good contact.
This process provides a reliable, corrosion-resistant bulb holder with electroplated contacts.
If you like this video Please don't forget to Subscribe our RUclips channel with some more interesting videos stories still waiting for you further on.
@techmanufacturer
#techmanufacturer
Acid water in to sewer in to river in to garden in to food for your children.. Live long and prosper Pakistan
Это производство - химическая катастрофа. Работники до преклонного возраста явно не доживают.
ничего страшного новых наплодят, больше страшно за планету с пластиковым мусором который не перерабатывают
Sou do Brasil amo vídeos assim.
can you explain: at 6'18" the "holder" has three small holes around the big one, then, from 6'25" until the end, there are only two...
Его съедает ржавчина 😅
Congrats 🎉🎉
Excellent work
Quem quer trabalhar trabalha , sem muita frescura. Vcs estão de parabéns são muito esforçados 🎉🎉🎉🎉
Great job
Just STOP with the damned bell!!! It’s seriously annoying!!
👍
Good work
Wah kya kmal dy view ay ny 👍👏
Where is the malay translation..?
MOVIE LOVE VÍDEOS
Better to make tea lights.
*🤔 Técnicos de Segurança piram com esses vídeos 🤣*
Used to have such a "holder", metal was thin as foil, and it snapped off after attempt of unscrewing the bulb... That's a firehasard.
Dang,I thought they was going to put the bulb together
И ВСЕМ ХОРОШЕГО НАСТРОЕНИЯ
Новый видео ждем
Hoping this will not be sold in our country
I've been spending lots of time watching rubbish like this. What's wrong with me?😂
Что то я не понял а почему в начале на цоколе 4 отверстия а потом почему 3?
Его коррозия захавала 😂
Bro location please
Kaisi feeling a Rahi hain
No perder el tiempo spoiler solo hacen los casquillos de las bombillas 😤nada de bombillas.
Dont you Think it is a Bulb holder
Tanto desperdicio de agua por una simple tapa de un foco y contaminación
Do you think this is a simple work and wasted a water.....oooh plz keep your judgement to yourself
What the hell is an LED Blub holder?🤔
😂😂 I seriously laughed so loud when I read this comment!! (I’m a simple person 😂😂)
It's where the blinker fluid goes 😂😂😂
Good work
Ggggghhhbhhg