Thanks, I am glad that my idea has help you. The tester that you found looks like the same design I used. I just took the guts out of the housing and drilled the holes in the cover to match the spacing of the LEDs then used clear silicone to glue and seal everything in place. Sounds like you have the idea.
That's the coolest voltage indicator I've seen so far. I searched Northern Tools but couldn't find what you might have purchased. I have a 1995 GL1500A and have been trying to find a good installation for a voltmeter. So far you have the best!
I got it from Northern Tools. I believe it was a battery volt tester / monitor. I took it apart. it has a circuit board about 1/2 wide and 2 1/2 long with the wires hooked to it. I drilled the holes in the Goldwing plastic cover to match the spacing of the LED's on the voltmeter. I then took clear silicone to glue it to the cover and then encased the hole thing in silicone to waterproof it. I wired it to something that has power with the key is on. Simple and it works like a charm.
I just found the tester I think you might have used on eBay. Search for "Battery / Alternator Tester, LED Indicators 12V Alternator Charging Tester" and you should find it. It's being sold by dcmm1997. RUclips won't let you post links to other sites... Cool idea! Thanks!
Very nice. Those GL1500's are timeless.
Just saw your video, always something to learn about the Goldwing, I learned a few things about my Goldwing watching this, thanks...
Thanks, I am glad that my idea has help you. The tester that you found looks like the same design I used. I just took the guts out of the housing and drilled the holes in the cover to match the spacing of the LEDs then used clear silicone to glue and seal everything in place. Sounds like you have the idea.
That's the coolest voltage indicator I've seen so far. I searched Northern Tools but couldn't find what you might have purchased. I have a 1995 GL1500A and have been trying to find a good installation for a voltmeter. So far you have the best!
very nice machine..you have..GOLDWINGS Rule
Personally, I would not mind owning one of these bikes. They are very reliable and dependable.
I got it from Northern Tools. I believe it was a battery volt tester / monitor. I took it apart. it has a circuit board about 1/2 wide and 2 1/2 long with the wires hooked to it. I drilled the holes in the Goldwing plastic cover to match the spacing of the LED's on the voltmeter. I then took clear silicone to glue it to the cover and then encased the hole thing in silicone to waterproof it. I wired it to something that has power with the key is on. Simple and it works like a charm.
Very nice bike.I have a 1500
Очень классно выглядит.
If yours is like mine , it has a seat cover in the little pouch at the bottom of the passenger back rest.
I installed the I-pod interface. It is hooked into the antenna wire and plays through the radio
I just found the tester I think you might have used on eBay. Search for "Battery / Alternator Tester, LED Indicators 12V Alternator Charging Tester" and you should find it. It's being sold by dcmm1997. RUclips won't let you post links to other sites...
Cool idea! Thanks!
I love it
Its available for sale?
Place?
Price
Think I found my next bike. It's not a Harley, it's as you said... a cadillac
does anyone know which heal toe shifter and running bords on the 96 goldwing
How you install speedometer cable 1500 Se
how much did this bike sell for? where is this located?
who installed the ipod connection
thats a skick voltmeter......where did u get it.
How much?
Where is the vin located
شكد سعره
can anyone tell me his a 1989 goldwing any good.im thinkin of buyin one with 57k
That’s what mine is and everything still works with 97000 miles. Replaced timing belts about 2000 miles ago .
How much?