BMW Smoke from engine room|Burning oil smell| 520d valve cover gasket replace|

#bmw520
valve cover gasket replace
oil leak problem
smoke from engine room
Burning oil smell
problem oil dripping
Song: Itro - Panda [NCS Release]
Music provided by NoCopyrightSounds
Free Download/Stream: ncs.io/panda
Watch: • Itro - Panda | Progres...

[@davidjones6616]

Thanks great video, did mine had to bleed injectors then fired up

[@MrWellhairy]

Great Video but what torque is needed for rocker cover bolts?

[@MarkoFQ]

10Nm

[@retkuuu1990]

Perfect video thank you :)

[@Appydem]

Where can I find something showing the tightening order for the N47 4 cylinder?

[@luisgameiro7486]

I have the same question, do whatever knows the tightening sequence?

[@craigcarter8474]

Hi Great video, what torque was the injector clamp set to? Going to need to do this soon.

[@Nicrig]

ive done mine on 26 Nm all perfect no problems since two years ago

[@Nicrig]

also recomended if the car has over 100k miles to replace the whole rocker cover not only the gasket

[@unclepabs]

@@NicrigGood point as the Crankcase ventilation diaphragm (under the disk cover behind the oil filler) can go stiff & increase rocker pressure & cause the gasket to blow again or even worse symptoms! Replacement crankcase diaphragm & cover from Viaco is part V20-3341

[@ersinylmaz4172]

Have the injectors washers been changed? did it get old

[@iambenmitchell]

How did you get the injectors to come out so easily? Any advice?
I’ve seen people use a slide hammer, but I have the same injectors on my n47 e84 like in this video that have the fuel line on the side instead of the top so there’s no where to screw the hammer into.

[@marwCZ]

You are living in Dune?

[@user-zo5rz1fc4d]

Going to try this myself 😮

[@gedman9527]

Did you tell replace injector seals

[@user-jp6fk6cy5v]

Danke für Video perfekt

[@user-rp6hh9ln2k]

What is the socket size for rockerarm cover?E10 or E12?

[@dinkarsharma788]

Kya isse dalne se lekage nhi hogi kya

[@tomasmargelis8083]

Hi, so you only changed the gasket?

[@elvismekic7778]

Na ja nicht schlecht aber da ist novh viel zum machen,ware besser neuer Ventildeckel plus injektor reinigen , Dichtung auch wechseln und und also

[@RikiJasmin]

Neuer Motor einbauen wäre noch besser

[@ivanmaragliano3544]

È sbagliato farla partire cosi, si rovina la pompa cp4

[@davidjones6616]

how long was it cranked over before it started and did you have to bleed anything

[@champagnepapi9428]

even 2 minutes, don't be scared just wait