Hear ya on the freakin labor charges!!! Same way. Even bought dealer level software. Like $10,000 worth that’s already paid for itself with this after treatment BS!! Recently got some quotes for a head gasket. 8600!! Top line, labor $6,000!!! Guess ill be doing that in the driveway too. UGH!!!!
Supa nice job 👍👍👍 One thing though is another video I saw on this recommended having a priming pump since the lines were cracked, ether was mentioned but not the recommendation. You didn't seem to cover that. What did you have to do?
Boss I believe one of the 10mm is stripped on one of the seals I was cleaning the engine a bit I checking bolts and one turns and turn it don’t bottom out all others are tight as they should hoe can I fix it or I need to take it to the shop thank you in advance also I’m driving a 2019 Frieghliner cascadia dd15
Boss what about replacing that black plug above it what’s the name of that plug going in the engine mine is leaking a bit but from the one closest to the cab
@@truckerslife1013 mines I believe leaks a bit can I just take it out and put a new seal or something please if you make a video on how to fix that leak inside the plug it’s clean but around it it’s where I see a bit of oil coming thru
That's your injector harness. You can use carb cleaners for the outside before unhooking the harness from the side of engine. If you have oil on the inside of the big harness plastic bolt you need to clean it out good and get you another o-ring and medal clip that attaches to harness. If you don't the oil will bleed through the harness from the engine down to your ecm and destroy your computer..
@@truckerslife1013 I was doing one where the engine is buried in the cab ... and boy was I in over my head! The people who have me doing it gave me crows foot to use instead of the actual fuel line socket boy was I pissed off that day ! I couldn't get the banjo bolt back on until someone brought a electric ratchet and angled the bolt into place for me ... then from there we just put it back together I learned my lessons 101 about that seal !!
Man I don’t have a word to thank you
You are very welcome😊
Thank you for this! Great camera angle and explained throughly thank you sir
Thank you as well. Please tell your frienda
Beautiful thanks
@@javiercabello3814 you are very welcome
Bro you saved me so much money and time thank you so much for sharing!
Thank you and glad I could help...please tell a friend
Thanks for the class my 18 Cascadia leaking I will follow your steps an replace mine
Glad I could help.
Amazing job 👍👍
Thak you so much. Hope I helped😊
I would love to see how you remove injector six that’s the most easiest one at the rear of the engine 😂 enjoyed your video👍
Lol is right. That #6 can give a person some issues
I’m in the market for a freight liner and I found a 2005 but the owner says one of the injectors is bad what u think
Thank you for keeping it simple!
You are very welcome. Please tell your friends
Thanks for the video, you saved me some thousands of dollars. Bless
Glad I could help 😀
Thanks
You are welcome. Please subscribe and tell a friend
My boy Leroy man I’m using this right now thanks bro
Wowsers, that's crazy...thank you and make sure you subscribe
Excellent thank you for sharing 👍🏽👍🏽👍🏽
You are very welcome. 😁 please tell a friend
Thanks for sharing good ideas
You are very welcome and thank you. Please tell a friend
Great video!! Thanks for the help!
That is for the Jake brakes and injectors.
CAN YOU MAKE A VIDEO ON HOW TO REPLACE THE NOX SENSORS ON FREIGHTLINER CASCADIA PLEASE.
@@mogivanni those are super simple to replace. remove passenger-side skirt and there they are
Is that Bruce Leroy?
Hear ya on the freakin labor charges!!! Same way. Even bought dealer level software. Like $10,000 worth that’s already paid for itself with this after treatment BS!! Recently got some quotes for a head gasket. 8600!! Top line, labor $6,000!!! Guess ill be doing that in the driveway too. UGH!!!!
Lol. It's not hard. You got this brother
Thanks for sharing, great video
You are very welcomed. Plz tell a friend
Supa nice job 👍👍👍
One thing though is another video I saw on this recommended having a priming pump since the lines were cracked, ether was mentioned but not the recommendation. You didn't seem to cover that. What did you have to do?
A PRIMING PUMP IS IDEAL BUT I DONT THINK ANYONE HAS ONE SO THE MANUAL PUMP ON YOUR UNIT IS THE WAY TO GO. I YOU AND TELL A FRIEND
Will the engine start immediately or must the air be removed from the diesel pump? Thank you
It will start immediately
thanks for the vid , I need to do 3 on my truck...
Your welcomed. It should be a piece of cake
THANK YOU SIR!!
Boss I believe one of the 10mm is stripped on one of the seals I was cleaning the engine a bit I checking bolts and one turns and turn it don’t bottom out all others are tight as they should hoe can I fix it or I need to take it to the shop thank you in advance also I’m driving a 2019 Frieghliner cascadia dd15
There is a thing, it's called heli coil. Its placed inside the stripped hole to create threads for the bolt.
Thank you for.video
You are very welcome. Please tell your friends to subscribe
Thank you bro
You are very welcome
good stuff.
Your best
How you bleed the system after open the fuel rail?..
You dont have to bleed the system. You only have to prime the system if you replace the fuel filters
Thanks 🙏🏿
Thanks sir very well explained where is ur location address
Thank you I appreciate that
Good work!
Thank you . I appreciate that
@@truckerslife1013 No thank u, u da man wit da plan!
Boss what about replacing that black plug above it what’s the name of that plug going in the engine mine is leaking a bit but from the one closest to the cab
That is for the injectors and Jake brakes.
@@truckerslife1013 mines I believe leaks a bit can I just take it out and put a new seal or something please if you make a video on how to fix that leak inside the plug it’s clean but around it it’s where I see a bit of oil coming thru
That's your injector harness. You can use carb cleaners for the outside before unhooking the harness from the side of engine. If you have oil on the inside of the big harness plastic bolt you need to clean it out good and get you another o-ring and medal clip that attaches to harness. If you don't the oil will bleed through the harness from the engine down to your ecm and destroy your computer..
Before you start the engine need purge or how please
No priming necessary
Thank you.
Did you have to replace the o rings also?
No sir. There aren't any
But when ever there is a o-ring, good idea to replace them
Do you have to prime the system before you start the truck or not
No
Ok. I haven't done it yet but I am gonna ..thanks
@@truckerslife1013 how do you prime the system? Saw one video of a guy putting starter fluid in the injector. Any thoughts? Thank you.
No Sir
@@truckerslife1013 thank you
You work for CRST I do too
Awesome...thanks for subscribing
TRUCKERS LIFE 101 no problem and yeah I’m a mechanic at the chino yard in CA
Have you ever done #6
Yes. You just have to remove a few more fuel lines to access the seal
@@truckerslife1013 I was doing one where the engine is buried in the cab ... and boy was I in over my head! The people who have me doing it gave me crows foot to use instead of the actual fuel line socket boy was I pissed off that day ! I couldn't get the banjo bolt back on until someone brought a electric ratchet and angled the bolt into place for me ... then from there we just put it back together I learned my lessons 101 about that seal !!
Lol very entertaining story. Thank you for sharing
@@truckerslife1013 it gets worse! The place didn't have a priming machine or starting fluid 😆 the truck wouldn't start
Onley for one and now I need to fix the rest
That's crazy. Wish you were nearby, but with this video, you can DIY and save big bucks
@@truckerslife1013 I stripped the 10mm bolt holes on the#6. Help? Can I put a larger size bolt or is there an easy fix?
@@peachtransport2157 you can purchase a heli-coil. Check at any auto parts store and explain to them what happened
Do you have to use an O-ring also?
No sir. Just the seal
@@truckerslife1013 Thank you for the quick response. 👍
how did you know it was bad?
what were the error codes?
thanks
No codes. It was leaking
👍😃
Where are you located
California
@@truckerslife1013 do you make house calls to do a diagnostic computer check on dd13
Do you make house calls can you do a computer diagnostic check
Sorry , I do not.
They changed me 1,850 for that
Just for the seal? Wowsers