That's significant, 10 db less at idle and about the same on throttle. Nice diy!
4 года назад+3
Its def a decent muffle, but its still absurdly loud and not gonna do much to make a difference on the street if I cop hears/sees that lol.. He def need a big resonator, or he can just do a a valved exhaust setup where he has his fender dump, but can hit a switch and block it off and send the exhaust out the back thru a full exhaust when on the street.
@ yeah I agree its still too loud and people around specially cops would definitely notice. I would jist like to commend the effort made on that diy to muffle the sound a bit. I also agree that mazzei should do a full conventional exhaust under the car that has tolerable loudness and have a switch to use that fender exhaust so he can use this rx7 on normal roads without too much attention. Then with a flick of a switch that side exhaust will be activated! Hehe
Very significant noise lowering. Problem with rotaries in general (and especially that one!) is the heat and exhaust pulses destroy any proper noise killing device bolted behind them. The soup can will last until the first decent backfire lol. Best option would be something similar made from thick walled stainless, packed with stainless steel wool, and a bent tip to point the noise downwards.
I hope that doesn't start a fire. Love this channel tho. I've been trying to build my veilside fortune rx7 for a long time in my garage and in storage on my own. I've finally really put the time into it after my baby girl was born. A bit of help from a friend. I always looked at this channel for support. I know people dislike that kit, but I sold my isf to get my rx7 and the wide body that makes my dream car. I'm sticking with it and love this FD. I was always told rx7 s were unreliable and when you're building a car you love who cares.
A good resonator/muffler can really make a big improvement in sound quality. Honda motors are notoriously loud and higher-pitched. The Rice kids love putting big ass 4" N1-style muffler fart cans on them and they sound like pure shit. What those Honda's need is top quality stainless(Or Ti if u have the money) with a proper silent resonator and a proper Muffler. The 18" Magnaflow Resonator and the Vibrant Ultra Quiet really deepens a Honda motors sound, it just needs to be paired with a really good muffler like the Apexi Ws2.
For road driving not racing perhaps run a 4" exhaust to the back and fit a custom 4" muffler not a resonator. Resonator cancel some high frequency noise but a muffler will have noticeable db reduction. A good muffler hp drop will be very small. A 4" muffler I made for a 20b made 880 rwhp around 95db. With an ear splitting straight pipe 900. Adjust boost controller to same boost same hp.
Brilliant! Nice job you guys. It may not be perfect, but for a quick 'temp' noise reduction, it actually sounds good. I had the same type of silencer years ago in my sport bike. A real pipe out the back might eventually be needed if you want to continue to drive on the street, but this will help in the meantime.😁👍
Vigoss Virus what are you 5? You don’t think rob is gonna put on the proper aero kit for events such as pikes peak and everything else, both cars are beautiful street and race cars
Just have a cut out for a nice ultra quiet Resonator.. Like the MF 18" or Vibrant.. I use them on my hood and fender exits and they make a huge difference. This silencer had a subtle affect, but it was still load AF.
i had exact same thing with my GT47 supra just longer and the feed in was conical .. made a big difference .. it used to sit in a towel on the backseat when it was go time
What more can you do?... Would fabricating an entire exhaust system with catalytic converter with QUICK DISCONNECT feature work...so a quick disconnect for the street & another for drag racing
If you re pack that thing with stainless steel wool, the packing will last longer than your first drive (that 2 stroke fiberglass packing will burn out in no time!
This is what I do with 2 stroke mopeds lmfaooo. It quiets them alot but yes it caps their power. And yes, I know I'm mentioning mopeds and this is a rotor symphony, but the scenario it's the same, it would still hurt eardrums.
Not gonna lie. Slowly becoming a person who genuinely likes rotary engines 😂 before I'd always hate on them, but it turns out I always hated on the 2 rotor. I still do lol. I dislike the 2 rotor alot. But the 3 and 4 rotors...😍😍 The 3 rotor is my favorite, it sounds soooo beautiful when modded correctly and in a certain rpm range
@@dewaldsinden8722 The rotors and the housings and the eccentric shaft and the seals and the little supporting stuff like an oiling system and cooling system and stuff.
they're different builds, mazzei's built for the track, not a straight line, while dahm with his awd + lack of downforce will smoke mazzei in a straight line
Lol the beauty mode is on your camera. Looked so funny when you walked up to it
OK thank God. I thought my eyes were fucking with me lmao.
Get an iphone. Then you dont need to look for these crap settings🤩🤩
That's significant, 10 db less at idle and about the same on throttle. Nice diy!
Its def a decent muffle, but its still absurdly loud and not gonna do much to make a difference on the street if I cop hears/sees that lol.. He def need a big resonator, or he can just do a a valved exhaust setup where he has his fender dump, but can hit a switch and block it off and send the exhaust out the back thru a full exhaust when on the street.
@ yeah I agree its still too loud and people around specially cops would definitely notice. I would jist like to commend the effort made on that diy to muffle the sound a bit. I also agree that mazzei should do a full conventional exhaust under the car that has tolerable loudness and have a switch to use that fender exhaust so he can use this rx7 on normal roads without too much attention. Then with a flick of a switch that side exhaust will be activated! Hehe
Very significant noise lowering. Problem with rotaries in general (and especially that one!) is the heat and exhaust pulses destroy any proper noise killing device bolted behind them. The soup can will last until the first decent backfire lol. Best option would be something similar made from thick walled stainless, packed with stainless steel wool, and a bent tip to point the noise downwards.
I just noticed that he is the real life version of "Dominic Toretto".
What about Dominic Toretto
Dominic Toretto is the real life Mazz
Torreto wishes he was this cool 🤷♂️🤣
@@Matty.Hill_87 very true!
A better version of dominic toretto
Always up for a new four-rotor video
Donut should do an episode on this bad ass build.
LIGHTNING
I hope that doesn't start a fire. Love this channel tho. I've been trying to build my veilside fortune rx7 for a long time in my garage and in storage on my own. I've finally really put the time into it after my baby girl was born. A bit of help from a friend. I always looked at this channel for support. I know people dislike that kit, but I sold my isf to get my rx7 and the wide body that makes my dream car. I'm sticking with it and love this FD. I was always told rx7 s were unreliable and when you're building a car you love who cares.
Oh no! A fire in the exhaust! As if it doesn't spit flames regularly rofl
@@KalLanPIDT well no shit, but with the wrap it could light and keep burning specially with the fresh wrap.
I guess we got one of these guys
@@spencergoss9987 Spot on, needs stainless steel wool packing.
NoNoNoNii no it’s not look at 1:52 the wrap is on the outside of the exhaust so it could light some shit up if it burns.
I even feel like it sounds cleaner.!
A good resonator/muffler can really make a big improvement in sound quality. Honda motors are notoriously loud and higher-pitched. The Rice kids love putting big ass 4" N1-style muffler fart cans on them and they sound like pure shit. What those Honda's need is top quality stainless(Or Ti if u have the money) with a proper silent resonator and a proper Muffler. The 18" Magnaflow Resonator and the Vibrant Ultra Quiet really deepens a Honda motors sound, it just needs to be paired with a really good muffler like the Apexi Ws2.
Thats an amazing difference us much as you and I loved the orgasmic sound of the 26B 4 Rotor it is still as orgasmic as what it was before and now
true, more enjoyable for smaller spaces or chill places
it made a difference i can tell still sounds amazing 🔥🤘🏼
Great DIY that works! well done and great video... it still sounds awesome!!
For road driving not racing perhaps run a 4" exhaust to the back and fit a custom 4" muffler not a resonator. Resonator cancel some high frequency noise but a muffler will have noticeable db reduction. A good muffler hp drop will be very small.
A 4" muffler I made for a 20b made 880 rwhp around 95db. With an ear splitting straight pipe 900. Adjust boost controller to same boost same hp.
Brap brap brap brap brap i could listen to that all day. What a epic build!
Pretty damn good difference👌🏻 but still with that sweet high pitch
Amazingly effective! Well done!
Y'as vraiment des fous sur terre !!! Ils faut être tarés pour faire un engin pareille ... Bravo !!!!
Brilliant! Nice job you guys. It may not be perfect, but for a quick 'temp' noise reduction, it actually sounds good. I had the same type of silencer years ago in my sport bike. A real pipe out the back might eventually be needed if you want to continue to drive on the street, but this will help in the meantime.😁👍
Love your car man . It just keeps getting better and better 👌🏼🔥🔥
PERFECT SOUND ROTARY!!
Bro I almost forgot how much I love the RX7,car look sick. Sound awesome with the silencer!!
Can’t wait for the Mazzei v.s dahm 1/2 mile
This car can take a corner dude. U blind with all the aero kit?
Fuxking g@y rob dahm g@y fan
Vigoss Virus what are you 5? You don’t think rob is gonna put on the proper aero kit for events such as pikes peak and everything else, both cars are beautiful street and race cars
Never realized these guys were in the Birmingham area until I saw the last video. I've always been a huge FD fan.
👍coolest rotary ever mate
This thing must be realllyy loud then....
That’s crazy 10 dB difference that’s more than 3 times more quiet
please explain to me, how you made that calculation lmao
Mophie that’s just general physics every 3dB is double the loudness
Mophie dB values are logarithmic 10dB difference is huge
Sounds alot better 👌
Just have a cut out for a nice ultra quiet Resonator.. Like the MF 18" or Vibrant.. I use them on my hood and fender exits and they make a huge difference. This silencer had a subtle affect, but it was still load AF.
why not run a full exhaust system? amazing build @mazzei formula
Nice.. Still can hear the turbo whistle
I thought it was already a complete perfect car. Yet he still have something to upgrade
downgrade*
@@KalLanPIDT its a definite upgrade since he wants to drive it on the street
@@adrianwelgemoed9562 from my pov its not
@@KalLanPIDT whats your point of view? Do you enjoy going deaf? Or being pulled over?
@@KalLanPIDT You can get banned from some racetracks like nurburgring if your cars is too loud. This is definetely an upgrade.
Them turbo noises though 😍
Expect to be seeing this beautiful Mazda around much more
That car makes that homemade silencer look good 💪🏻 I’d say that can just raised in value 😂
Sonho consumo motor rotativo parabéns muito top o rx7 👏👏👏👏
i had exact same thing with my GT47 supra just longer and the feed in was conical .. made a big difference .. it used to sit in a towel on the backseat when it was go time
What more can you do?... Would fabricating an entire exhaust system with catalytic converter with QUICK DISCONNECT feature work...so a quick disconnect for the street & another for drag racing
The sound is way better and silent!
Nice
gut idea, i have a suprais have anice weekend raudy ;)
Good one, sound nice still.
Crisp.AF
Now those it make a difference if the soup lid is from a clam chowder soup or should I stick to a chicken soup?
If you re pack that thing with stainless steel wool, the packing will last longer than your first drive (that 2 stroke fiberglass packing will burn out in no time!
This is what I do with 2 stroke mopeds lmfaooo. It quiets them alot but yes it caps their power. And yes, I know I'm mentioning mopeds and this is a rotor symphony, but the scenario it's the same, it would still hurt eardrums.
LOOOOOUD NOISES. That turbo whistle is sex
As much as I like a open exhaust in town it needs to be respectful there are kids and stuff that the loud pipes can hurt
Sick
Success! God job guys 👌
Is she twincam?
I hope youre kidding
Ofc 😂
Lol 😂 I love it
@@benyvonnemckenzie6576 Lol😂
Great
Woot
Meanwhile I get banned from the nurburgring for blowing 131 😅😭
Lordy what's popping 131 db?
Also commenting to know what you’ve got😅 131 is loud as hell
A dude i knew wrapped a polish beer can around the pipe of his Bobber.
Actually looked rather amusing. =]
WoW I love it
I just came for the exhaust clips 😂
Someone getting them gains..
Damn i love your car broo :((
Isn't that part of the exhaust an electric cutout though?
Not gonna lie. Slowly becoming a person who genuinely likes rotary engines 😂 before I'd always hate on them, but it turns out I always hated on the 2 rotor. I still do lol. I dislike the 2 rotor alot. But the 3 and 4 rotors...😍😍 The 3 rotor is my favorite, it sounds soooo beautiful when modded correctly and in a certain rpm range
🔥🔥
Epic
Just drive around with few noise cancellation loudspeakers pointed at the police. Haha.
Most aggressive car of the Internet
Waiting for tes drive check sound full trhottle
replace the rx7 body kit with veilside body
Restrictions is gonna burn your panel off mang
Lol I'm sorry but something like that is always full send
I thought the soup can sounded wicked
I want to build a 4 rotor what parts do i need
About $100k.
@@billybobjoe198 okay and what parts do i need
@@dewaldsinden8722 The rotors and the housings and the eccentric shaft and the seals and the little supporting stuff like an oiling system and cooling system and stuff.
WHERE'S THE TRUMPET?!
new phone?
Who dis
bilp blip
🇵🇹
Or just put a bypass with a real exhaust on it.
extra weight on a race car? no thanks
You should collaborate with Rob Dahm. Race against HIS 4 rotor
they're different builds, mazzei's built for the track, not a straight line, while dahm with his awd + lack of downforce will smoke mazzei in a straight line
Review trong xe
you made a straight through muffler, congratulations on the noble prise.
Its spelled Nobel Prize, and thank you!
@@dzmazzei Spelt. More then one form of English. Your welcome.
@@dzmazzei Spelt. More then one form of English. Your welcome.
wait wait, you're no no no wait yaw.
Philip Perry
Yeah, just like there’s more than one form of asshole.
yooo
If you want to make money, pay an editor and graphics designer to make thumb nails and a logo for you, then start pushing a brand
More focused on the fun to be honest
IN CRE DI BLE
Lol silencer.
*Exhaust dumping from fender*
Pov?
Dont do that man come on iets pure rotary u trying too make a beast spund like a fairy keep the beast shouting
What a weird camera
This 4 rotor rx7 way more batter 🤟💥 than rob dahm full billet crap
F da police