How to choose the right turbocharger || EXPLAINED
HTML-код
- Опубликовано: 14 июн 2024
- In this video I explain how to choose the correct turbo size for your car! All the formulas and calculations are in the video. Let me know if you like this super technical stuff.
Enjoy... 
Авто/Мото
your channel is so underrated, you dont only explain turbochargers in detail but display graphics to better understand them in detail i havent seen anywhere else on youtube, i really wish you the best man and thank you
Thank you so much! This is super motivating 🙏
For real I just got into cars and this channel really open my eyes to the world.
@@duynguyen4164 👍I'm learning stuff alot easier from him also he's legit
Yo I'm an auto wrecker, sell 3-10 powertrain a day it is nice. You explain well, hats off to you, Im glad your teaching it all the best
@@MZopyrusit's factible put un turbo A una Chevrolet S10 2.4 4cil turbo diesel
By far one of the most informative turbo videos I've seen. I'm looking to upgrade my 2004 Honda Civic with a custom turbo setup, and I learned more in these 13 minutes than all of the hours and hours I've spent scouring the internet for information.
Same
Likewise
I’m preparing for automotive trade school things and at the same time learning how to choose a turbo for a future project I’m planning out for a 91 crx or ef sedan
I'm in the same boat. I'm trying to figure out how viable turbocharging my 2005 Civic LX is lol
Good luck brother!! I have a 99 turbocharged SI and it rips, I bet yours is gonna be kickass 💪💪
Never understood compressor maps from any other YT explanation.
You are a gifted teacher.
Went through the math with you (using my numbers) and can't thank you enough.
Brilliant, absolutely brilliant.
I'm confused. When I run the numbers for manifold pressure I get a decimal not 34.5 psi I get 0.17270
O.K. 25 years ago I bought a book and read through it and for me it took some time, this guy explains it so quickly and accurately, he did skip the exhaust housing size, but they are easy to swap, one of my cars I went from a 0.86 to a 1.02 A/R and gained a lot top end and lost very little at lower RPM. Current build is a N54. I'm a full time dyno tuner and a mechanic for 37 years and this was a great refresher
I just want to share my personal lesson learned from sizing a turbo using this exact method - which resulted in lazy/laggy setup for street driving. I learned that you don’t need peak compressor efficiency at max RPM. It’s actually okay to be tapering off to the choke point at max RPM in a street application, which is what most factory turbocharged cars do. It is better to optimize peak compressor efficiency for the RPM range where you want to make power. With that in mind I would do the calculation at various engine RPM levels and compare the plot - looking for max efficiency at, for example, 5k RPM. It’s a good sanity check to plot the max RPM too, but not the number I’d care the most about.
This is great, and 100% true.
I tell people that the basic answer to the right size turbo is the smallest turbo that meant you power needs. Be realistic about your engine's power. Beyond that it start getting mathy.
@@177SCmaro people like to go oversize on turbo, if you live in a area were you don't have a lot of big and long straights is just dumb to have a turbo too big
I wanted to upgrade my turbo's on my Mitsubishi GTO , 3L V6 twin turbo AWD .
@@MZopyrusej1 b16 a 2 head b20 block v tec on the too2 los árboles ambos tienen v tec wirh headers yo need to do a gool turbo build somthing of 1000bwith ac😅
Such an underrated channel, here's to 10k by the end of the year!
10k by the end of the year would be great! 😅 Thank you for the support
Been on RUclips on and off all day. So far best explanation of turbo sizing
You're an absolute LEGEND for posting this type of information and making it so easy to understand. My brothers and I recently picked up a Z32 twin turbo and we plan on converting to single turbo for power numbers around 550-600whp. Now I can figure out exactly what turbo would be best for our goals with this car. Thanks bro :')
Keep up the good content!
Thanks this was really helpful for understanding turbos and how to choose one, im gonna try to turbo a nissan 1996 pick up with a KA24E the Brother of the KA24DE
Me too except it’s a 92
This content is gold. High quality information, no crap, all functional and delivered in a clear and concise manner. Big +1 to this.
Awesome explanation. I'm an engineer and followed this every step of the way. Very nice.
An underrated informative channel if i may say so myself . . . I learned something new about turbochargers . . . Keep it up, and I'll keep watching for sure . . .
I’m trying to turbocharge my 02 rsx type s and your video has made it more clear for me to choose a turbo, I also want to learn how to tune as a dream job! Thanks so much for these well informed videos 🙏💯
Brooooo i have an 05 type s that i wanna turbo but i also wanna get bags with some white rpf1s with like my same blue factory color or midnight purple wrap or something idk
I just found you recently and I know that I’m late to the party, but your videos are amazing. Short and straight to the point. I’m interested in trying to turbo charge my 2011 Lancer ES as my first project car.
this is just the second video i see and i already love you
I'm trying to get around 650 wheel horsepower from my 2jz gte vvti, so I am looking for the correct turbocharger for my setup. It is going into my Volvo 940 which of all the cars is the one I love (driving) the most. 😁 Thanks for this video I will soon sit down and calculate if the turbo that I was gonna buy is the right thing for me. Cheers from The Netherlands!
sounds like something like a G30-900 1.06A/R or divided 1.06A/R. As long as ur on some form of meth or Ethonal. or a g35-900 would get it done.
Appreciate your content - exceptionally made and thank you very much for your efforts!!! Would love to see more!
FYI: CALCULATION ADJUSTMENT:
Die Volumetric Efficiency rate of your given values 95% should be added at respective 0.95 (not 95) --> or you have to calculate the result again with *100 which makes it more bulky.
My man, you are a life saver. I’ve redone this equation and checked at least 50 times and got a pressure ratio of .4 and was 🤏🏻 this close to going insane 😂
I just want to say your channel has seriously helped my knowledge of vehicles!!! Honestly dude you are my favorite content creator and I can confidently say you might be the best out there!
I just subscribed. I’ve spent about 20 hours trying to find a video with this much detail and information. I’m building a 1.8t vw for 500 hp and trying to make a fun streetable car. Thank you so much for this video and can’t wait to see more!!
Love the video, the equations make this much easier. I’m turbocharging a 2003 Lexus IS300 with the 2JZGE VVT-i engine. Sitting in front of a W55 5 speed for now, eventually swapping for a 6 speed CD009. It’ll be a street/drift build!
I hope your not one of them people That block the intersection of the streets that the News Media talks about and gets them confused with Drag racing.....there's no reason for anyone to block off the whole intersection to do Donuts fined a Empty parking lot to do that stuff....besides it's safer to do in a Empty parking lot.
Great informative vid! I think I've watched tons it turbo related vids now and definitely learned a whole lot in this vid about actually selecting the right type. Despite watching so many vids on this topic, I still have a hard time understanding how to set up the different gauges with the wiring, where to tap into what etc. Hoping you go into as much detail as you did with this vid when you get to that part of the build!
I love the way you put stuff into detail , I was studying how to choose the right turbo to make my rb25 hit 350hp to 400hp
MZ, I just stumbled upon your channel by chance. Oh my… you are one of the best thing out there on RUclips for the car enthusiast community. 🙌🏾
WOW. Thank you so much MZ!! I just learned something ill never forget, took mad notes as always, damn dude, cant thank you enough
I'm doing R&D on my LF 2.0 Sonata to build it :)
Glad you found it useful!! 😁
Ive been involved in engineering turbochargers for over 55 years, basically race cars (Road Racing Porsche) drag boats (Big Blocks). This guy is giving you one on the best quick overviews I have ever heard. I have heard a lot of theory and this is close to a good start.😊
8:47 Volume Efficiency is 0.95** when doing the formula :)
it is 95 wha
@@raffifuzza8836 When multiplying, you do 0.95 not 95
I really do appreciate this video. While I may never build a turbo engine, I had often wondered what went into picking specifications.
Just showed up in my feed. Saw the video, instant sub. Great and simple video of a topic often left behind. Greetings all the way from Argentina!
My apologies for the ignorance, but I’m not able to get my final equation to work out… I DID PEMDAS 😂😂😂, I’m getting like .13…. Any help is appreciated
Pemdas ain’t workin for me either 😂
You're working with a percentage in there, which he didn't correctly show in the video. For example: 95% should be entered as 0,95.
Dude, anything that educates a true power enthusiast truly enjoyed your condensed video. The only thing I regret is that it ended! I'm subscribing, keep up the great work!
Just saw this channel yesterday and I am definitely having fun here.... Keep doing it man....
Very informative ,explained in detail with graphs ! Thank you for better understanding of turbos !
It's just so easy to listen to you, theirs no BS, it's just stuff I need to learn. Thanks man. I'll be watching your videos from now on for my studies!
Just subscribed, by far the best information I have seen on this subject.
I love this video!
I am working on finding a larger turbo for my 2018 WRX with the 2.0 FA20F engine, but one that has the best balance possible between fast spool and power up to at least 8k.
After watching your video, I FINALLY have a grasp on how to make some sense of compressor maps and use them as a guide to select my turbo!
Great video! the animation's u take ur time to make is hugeeeee. love the channel
Your video was great. It's informative and entertaining as well. Keep up the great work.
This was actually very helpful in finding out how big of a turbo I would need in some cars and some physics on how to get certain horsepower. You definitely need more recognition
And thank you so much for the effort to explain all of this I haven’t really found any RUclipsr that takes the time to break it down like that for those of us that know cars but don’t know in depth numbers like that
You totally helped me understand what I need for a turbo ...you are awesome
This, and the video before this one, was an awesome video! I’ve been wanting to turbo my 05 Mustang GT, and this helped me a lot with where I need to start!
i’m looking to turbo a naturally aspirated mk4 supra and man your video have been superrrr helpful great work man please keep it up!
I’m currently trying to turbo my 05 scion xa. Thank you for the great videos your channel is amazing
That boring video, was the greatest thing I may have ever seen!
Just wanted to say thank you for the clear explanation. Helped immensely.
Hey man love your video and how simple you made it seem right now I’m trying to turbocharge my 03’ Honda Accord Coupe V6 V-Tec
This content is 24k gold....bravo dude....🙏
Wow, this is very informative and cool video! I will be watching this a few more times to help me find what turbo works best for my autocross Supra (7M powered). Thank you for providing this excellent video!
I turboing a 2008 Yamaha road star warrior v-twin motorcycle. I appreciate the tech you put into your videos.
I genuinely am glad you made this I’m trying to turbo an 01 3.6 v6 mustang it’s a 5spd manual hard top bright red can’t wait to have it built I’ve got graphs drawn out and a turbo picked out already for it thanks to this vid keep the good content coming please
Your channel is amazing.
I’m trying to turbo a 2020 Elantra 2.0L
Just ran across this video. Thank you. I am now enlightened (and picking a turbo for my car)
came across this while looking to turbo my m50 e34, this video is a huge help in deciding what turbo kit i should choose and what turbo i should get as well.
Amazing video, this helped me learn tons about which turbo I will need to use on my G37 coupe street build, ill keep coming back to this video just to make sure I get the right one in the near future!
You lied... This video isn't long, nor is it at all boring. I've researched so much and here you go in 12 minutes just laying down all the math in plain english. I almost paid money for straight-forward information like this. Keep up the good work dude! ✌
Just discovered you, you get my sub for sure. This is such an awesome and high quality video and has definitely been saved as a reference. Thanks for teaching me something new today.
New to your channel, love it, love your delivery. I may have to watch it a few more times however, with extensive use use of the pause button. ✊🏼
I so love this video, watched it with my excel sheet in hand making my calculations for various HP figures
yes keep it up we are out here looking for detailed info on stuff and you are putting out great videos
This is an awesome video. I understand turbos so much better. Having the formulas to find the correct turbo is awesome.
Finally a great video on how to pick your turbo!
im tryna tubro a 09 accord and this vid is probably the best guide for selecting a turbo. Big props bro💪💪
love from south africa this is the best channel on automotive
The best and most clear video on how to choose the turbo!
In my case, for a turbo D16z6 that will be in my Honda logo!
Many thanks bro!
You just thought me how to calculate and figure out the pressure ratio and mass airflow for my engine and how to use the compressor map to choose the correct turbo for my power goals, forever grateful, thank you!! 🙏
I have been searching for years for this video. Thank you!
Probably your most popular video. You're a champion 🏆
How do you only have 32k subs!?
The RUclips algo really needs to ‘turbo charge’ this channel…see what I did there😅
You are a gifted teacher, my friend. There world needs more of you! 🙏🏾
Been wanting to turbocharge my 04 grand am with a 2.2. your channel has been a god send
This was very digestible, thank you so much.
This was an awesome explanation. You did a really a good job explaining the why.
Best explanation of how to size a turbo I've heard or read ever. I've seen several other RUclipsrs try to explain it and not get it this well executed. Maximum Boost's publisher should ask you to write the next book for them.
Definitely not boring! Very insightful! I am upgrading my built SR20DET so this videobwas perfect for me!
Finally! I have always wanted to know this 😭 thank you for the video.
I just wanted to leave here an appreciation message for all the work you do. You make the automotive space understandable for everyone. I deeply appreciate the way you explain things, using drawings and graphics to make sure the viewer knows what you are talking about, also you are able to make those math related videos entertaining. I wish you well and keep doing your best:)
If this was school you’d be the cool teacher because you’re so easy to learn from. Just subbed 💯
stayed till the end, extremely informative! Thank you! Turbo charging a BMW z3 with a 6cyl 2.5L. currently making 350 to the wheels with a gt35 but searching for a little faster spool! Thanks again!
That’s was everything I need to know. Good video!
Turboing my m54 3.0 z4
I feel I can go into a project confidently and will be accurate on it.
Enough knowledge here, in detail,very short and straight to the point
Yep. I was still watching at 11:53!!! Phenomenal video!!!
Totally not boring at all man thanks you for this details explanation solve my confusion.
I'm looking to size twins for an Olds 455 in a 69 cutlass. this has been the most helpfull video i've come across yet
Crazy useful. Thank you. Setting up a 331ci notch Fox. Considering a turbo build.
No BS straight to the point. No wasting time. but aimed at the avid enthusiast with a little more than average experience.
Watched quite a few videos on turbo compressor maps. Yours is without a doubt the best one. Thank you.
And to answer your question - I am trying to pick the right turbo for my OM606 that will go into my Nissan Patrol Y61.
This has got to be one of the best videos I’ve ever watched. It’s detailed and entertaining at the same time. I’m trying to turbocharge a 2012 Toyota Venza, yes I know, mid-life crisis.
Turboing an 09 harley. This is exactly what I needed for the math side of things! Thanks
This is the single best turbo video I've came across on youtube.
10/10.
I'm not a mechanic, but I am aiming for a 500hp+ 1jzgte build. This is going straight in the favourites.
Thank you
what is the 1jzgte in?
Im tyring to turbo my 09 civic si. Got everything I need from this video
Amazing!! I’m turbocharging an ex show car pulsar gti sedan, been thrown so many different turbos to use , now I can pick the best one!
I love the way you explain things, great job! I'm gonna turbo charge my MB E230 it has a lot of potential. Aiming for first step at 300 HP, then will go up from there.
not long not boring very informative easy start to understanding turbo chargers
I just got a 95 Nissan d21 hardbody from a dude who used it to drift. Decided I wanted build it up a bit and get a turbo for it. This vid honestly helped me a ton. I’ve seen a few other turbo vids but all the info just kinda flew over my head. This vid helped me to put everything together. Thanks for the info man, hope the channel blows up!
I hope your not one of them people That blocks off the whole intersection just so you can do some donuts.....find a Empty parking lot to do that....the people that drift and do donuts in the intersection make it look bad on us street Drag racers because the News Media gets Drifting confused with Drag racing because the News Medias doesn't know the difference.....Not saying your the one that's doing it but please for the love of God spread the word and tell everyone to find a Empty parking lot to do your donuts at......peace ✌ and love to all motor sports 🏁🏁
Bro thank you so much. For the last idk how long i have been racking my brain thinking "how is it possible for people to spit flames out of their down pipe. This just showed me that after 5ish years of learning about cars and engine and physics of everything, I had either not learned or had forgotten basic turbo anatomy. I feel dumb😅
Excellent explain’n, love the math. Great video!
I’m going to switch the turbo of my Z20LER Astra H and this video has been a save for me, as I’m pretty new to tuning, thanks a lot!
best one i've seen yet. Great
Hands down the best automotive channel I ever found wtf how does it only has 23k SUBS, it's more informative than donut media.
Actually reached boost enlightenment watching this. Awesome video
Awesome video! Very new to this world, so its great to have something like this to learn. Ive thought about putting a turbo on a 5.3L LS btw