Does anyone else think the engineers were messing with us when they programmed this code 😂 Thanks brother, very clear and concise! Just watch this video while sitting in your car and follow along to Toyota's lil diddy.
Didn’t work with the “lock” button, for me worked with the unlock button, did it twice for programming two remotes and worked perfect, Toyota tundra 2004 thank you for your video!!
Awesome info man! Just replaced the battery in the fob in an 02 sequoia i bought and this procedure worked to a tee! Life saver . . Who could guess this procedure? Lol . . Nice and to the point. Just the way I need it!
A million thanks i just saw your video and program my remotes the only thing on mine was that I had to turn key to on twice and it worked on my 03 sequoia
This genuinely works no bs didn’t work first time I tried did it again and it worked no bs or not comment if it’s not working for you just keep trying ❤
Thanks for this! I’ve got the same truck and same key set. I was wondering though, have you gotten the window button to do anything? My remotes only lock & unlock.
My rear window only came down and could not get it to roll back up. It also disabled the inside window control so I had to use the door key to roll it back up. Tried to redo the sequence, but without a different result. Other than that, works great.
@@yeahboyoboy The remote can't put the window up. Safety feature. If the window lock button on the door is pushed, that also disables the rear window button.
2005 Sequoia. When I get to the last step, clicking lock on the remote, the locks cycle twice. That indicates the remote was not accepted. I have tried this maybe 10 times! Any idea why it would know I have done the steps on the remote but not accept the remote? I also tried turning the key twice, which clears existing remotes. Same results. I bought this 2005 Sequoia used. In really good shape, but no remotes.
When I remove the key entering program mode my locks cycle twice then when I push lock and unlock at the same time they cycle again (twice) and then when I push lock nothing. Any recommendations?
Hi dear..Please look for a way to program the Center Lock Toyota Sequoia 2002. I have a problem that the ash device does not work. It gives a signal, but it does not lock or unlock the device. Note that all doors operate a manual center lock, please help.
It doesn't work with all cars...the car has to be built with the program option included...if its not then the car will never answer you ....that is how you know unless you call the dealer and have them run a make on your vin
This is all garbage. I just spent an hour trying to make this work on my 2004 Sequoia and it does not work. Following these steps will not put the car into “programming mode” either.
Does anyone else think the engineers were messing with us when they programmed this code 😂 Thanks brother, very clear and concise! Just watch this video while sitting in your car and follow along to Toyota's lil diddy.
Didn’t work with the “lock” button, for me worked with the unlock button, did it twice for programming two remotes and worked perfect, Toyota tundra 2004 thank you for your video!!
I don't know why I struggled so hard doing this but it worked and I'm elated!
Awesome info man! Just replaced the battery in the fob in an 02 sequoia i bought and this procedure worked to a tee! Life saver . . Who could guess this procedure? Lol . . Nice and to the point. Just the way I need it!
A million thanks i just saw your video and program my remotes the only thing on mine was that I had to turn key to on twice and it worked on my 03 sequoia
Same here
Turn key on twice to clear existing remotes and program new remotes. There is a limit to how many remotes can be programmed. I don't know the limit.
Just did this for my 2005 Tundra! Worked perfectly 😎👍🏻
Thanks so much for posting this!
my 2006 tundra only has a metal key but does have central locking.... will this work?
@@throlyhd9448I think it should be
Thank you! For some reason, every other video shows a different method that did not work for my 2005 tundra. Finally got it after watching your video!
Thank you for this video. Super easy!
Cheat code enabled 👍😎 on my 2003 Toyota Sequoia I needed to turn the ignition on twice for it to work.
Which step did you turn it on twice ?
Very clear and easy instructions - thank you so much Sir!
Exactly what I needed for my 04 tundra limited, thanks!!
Up, down,. Left, right, left right a,b a,b select, start.
After the 8th try I got it to work. Thank you!
Worked like a charm! If it the steps don’t work the first time try again until it does.
This genuinely works no bs didn’t work first time I tried did it again and it worked no bs or not comment if it’s not working for you just keep trying ❤
Worked like a charm. Thanks for the video
thank you very much, easy to follow instructions
This worked for me, thank you!
Can you program the key fob for it to open the window?
Awesome job, EASY PESY!!
Life saver , thanks👍
This works but the last step is not close the door instead turn ignition to on then off then close the door and you should be set.
Wont work on 2005 Sequoia. When I get to step 3 after opening the door, my alarm goes off.
Did u get get it to work?
Thanks for this! I’ve got the same truck and same key set. I was wondering though, have you gotten the window button to do anything? My remotes only lock & unlock.
I’m not having any luck with the window either. If you find out how to make it work, come back here and tell me. Thanks!
My rear window only came down and could not get it to roll back up. It also disabled the inside window control so I had to use the door key to roll it back up. Tried to redo the sequence, but without a different result. Other than that, works great.
@@yeahboyoboy The remote can't put the window up. Safety feature. If the window lock button on the door is pushed, that also disables the rear window button.
Excelent!! ❤Yes it worked!!
Very good, worked for me
2005 Sequoia. When I get to the last step, clicking lock on the remote, the locks cycle twice. That indicates the remote was not accepted. I have tried this maybe 10 times! Any idea why it would know I have done the steps on the remote but not accept the remote? I also tried turning the key twice, which clears existing remotes. Same results. I bought this 2005 Sequoia used. In really good shape, but no remotes.
some comments say try turning the ignition on twice for it to work.
When I remove the key entering program mode my locks cycle twice then when I push lock and unlock at the same time they cycle again (twice) and then when I push lock nothing. Any recommendations?
When I tried this it wouldn't do anything!
I did it on my 02 sequoia and nothing is happening, is there something wrong my car or the key fob??
Good job!
Do you have to do the process for each remote?
AxZxTxExCxA Yes, you do the same process for each remote.
No, you only need to do the remote steps for each remote. 2 buttons, then 1 button.
Is that car a tundra
It’s just keeps setting my alarm off after the first step
Hi dear..Please look for a way to program the Center Lock Toyota Sequoia 2002. I have a problem that the ash device does not work. It gives a signal, but it does not lock or unlock the device. Note that all doors operate a manual center lock, please help.
Can’t get my 2006 sequoia into programming mode
I did what video says but when I done and tried remote my locks lock and unlock two times and stop what does it mean
That means it wasn't done correctly I had to turn the ignition on twice for it to work on my 03 Toyota Sequoia
Any particular brand for key fob?
Dos it work on 2014 Tundra?
I did the same thing, How come it not working
It's not working for me. Any help appreciated 💯
Porque no se puede programar mi control de sequioya 2003
Touch your head while standing on one foot, touch
Can I do this with the paseenger door instead of the driver door? Because my driver side door light switch doesnt work.
I don’t know for sure, but it seems like it would still work since you’re still engaging the locking mechanism.
It would only take you about 1 minute for find out. Let us know!
We not gonna talk about man's being a lady killer? Hawt hawt
It doesn't work with all cars...the car has to be built with the program option included...if its not then the car will never answer you ....that is how you know unless you call the dealer and have them run a make on your vin
This works in a 2002 toyota tundra???
I can’t get it to work on my 03 tundra
Not working for my 2001
En donde puedo comprar los controles y traerlos a Guatemala?
www.amazon.com/gp/product/B00Y1HRRFO/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Unfortunately this video did not work for me. This other video did work. ruclips.net/video/RjnUNWuJHs4/видео.html
This is all garbage. I just spent an hour trying to make this work on my 2004 Sequoia and it does not work.
Following these steps will not put the car into “programming mode” either.
Did you ever figure it out
Nope