For those of you that have asked how they can tip me. You can now click the “super thanks” button and add a tip. Grateful for all my viewers and subscribers! This channel would be nothing without you.!
I got the 3/8 stubby a few weeks ago for automotive use. Amazing tool! Just love how compact and powerful it is. I love using it so much, I'm walking around the house looking for something to fix. LOL!
I hear you. Every time I bought a new tool I always try to find something to fix and sometimes I even fix something that didn't require fixing just to use the new tool. I think I have a tool addiction. My wife always say "What! you buy another tool?" and I said "No, just a new toy".
Isaac D that’s what I figured. I have noticed some finish damage on sockets before and that was just using the 1/4” hex impact driver with a socket attachment.
Your tool reviews are great because they involve actual use by someone with a lot of experience. The tool worked well in this video but it had some problems when using an extension. Special rigid extensions are available for impact tools and they might help you get the job done a little faster.
Thank you for making this video, great job! As a diy'er I just ordered this for Black friday, got a great deal on it, and am really looking forward to using it under the hood. Your video answered a lot of Q's I had as to how it would do, it's limitations, and where it would work well. Thank you!
57 thumbs down? what?? This is a meaningful, practical review, not just endlessly driving bolts in and out in areas with unrestricted access. What would have been REALLY handy for me - being selfish - would have been showing a non-compact wrench trying to reach those tight spaces as well, to get some idea of how often you'd have to resort to manual methods. Great video though, really helpful.
paul tester glad you like the review. Thank you for tips. Not everyone is a fan of Milwaukee Tools and they think they’re hurting him by putting bad conversations and thumbs down on peoples videos. It’s the same people But do it in all kinds of reviews. I pay them no attention.
Left Handed Archer no it dosent, I use chrome sockets with 3/8 impact stubby all the time. It makes no difference at all, some impact socket sets sit very loose on the tool. Chrome sockets fit tight and right
@@dredaypoop7944 Chrome sockets are too hard for impact use, you will be wearing out the anvil inside the tool a lot faster than if using the correct sockets. Chrome sockets have also been known to shatter under impact too, bad enough to cause injury
Bought this to help tear down the front and rear suspension to install some lowering springs on my car and it worked like a DREAM. I only had to use the 2Ah battery and still had 2bars left at the end of the job. Would highly recommend!
How to Automotive I decided to pre-order one on faith, still waiting on it to show up and put it to use on a few brake jobs on two of my less-driven vehicles... Looking forward to the form factor and that 4th setting seems incredibly useful, which you really showed well. Cheers!
I should have my 3/8 stubby next Monday when the Cornwell guy comes back. I should've had it this Monday, but it just shipped that day. Cornwell had a promo going on for the new m12 stuff. I picked up a m12 1/4 ratchet with a free battery. and then the 3/8. stubby kit I haven't even been able to use the ratchet yet because Tuesday I got sent home early from work because they were going to close the highway due to flooding.
I have 3/8s and I run a 6.0AH battery and i pulled the cab off a 2012 chevy duramax and did headgaskets on it from start to finish the only bolts I didn't use it on was the headbolts that I broke loose then ran the headbolts out with it amazing gun
I bought this tool a while back and it’s absolutely my favourite tool in my box I had to replace it once though as the circuit board failed although I’ve never dropped it or gotten it wet. Not sure if this is a common problem. Milwaukee gave me a brand new replacement and so far so good. I’m very happy with it as it has amazing power and comfort for everyday automotive use.
I know that engine had it in my 95 xle gold trim Camry then yrs later I had a 2000 Lexus es300. Loved that engine had 248,650 and 206,785 before I sold it this summer. Ran flawlessly
Really good job demonstrating this tools abilities, thank you. I plan on buying one soon, I just bought the M18 FUEL 1/2" High Torque impact wrench & the FUEL M12 1/2" Ratchet Wrench. I'm 54yrs old & just switched to Milwaukee Tools from DeWalt. I really like Milwaukee Tools innovativeness & thinking outside the box. I like their backpack vacuum, cordless soldering iron & cordless heat gun too I'd like for Christmas :-) Subscribed just now. Please do more videos like this.
Good video. Have you tried using the 4Ah battery? It may give you the torque needed for removing those reluctant fasteners. Some cordless tools don't produce max power when using the compact battery.
Its the only tool i keep in my automotive bag. I have drowned it in trans fluid, oil, and coolant. I have dropped it and left it out in the rain. The head is a tiny bit on the big side but it makes up for it in power. Worth every cent I spent on it. ($100 for tool, $50 for 8-22mm impact socket set, $60 for 6.0 battery, charger, and bag. All picked up locally from FB marketplace)
Enjoy your videos, very through and concise. I was able to obtain this tool due to your review, someone bought it for me after I did a brake job. I have quite a few Milwaukee tools due to your reviews, all of which have been purchased for me as gifts, due to the work I have performed on there vehicles.
Brian, Thanks for a great informative video, i have purchased the high torque and mid torque Milwaukee's and LOVE em. They make the best quality cordless tools hands down.
I find that running the 3mah larger 12v batteries gives you the whack to get those bigger bolts out. The same is true for the cordless ratchets. More battery= more woopow! Good video ive yet to add this tool to my milwaukee collection but its next on the list!
@@HowtoAutomotive it’s a pretty large difference. There’s a large testing channel on RUclips that showed this impact breaking away 475ft/lb after about 10 seconds with the 6.0 battery
Nate Dowd glad you like it.In about three weeks Milwaukee tools is send me back to their new tool symposium where they unveiled all their new stuff for the new year. So I will be making a video about what’s coming out in the future make sure you subscribe for that and click the bell. Thank you so much for watching!
Man, Awesome review for a guy like me wondering if this tool can be used to work on my car at home, specifically for doing a break job. I had concerns about the battery life being a 12v and for a home gamer it clearly has more than enough. I was really torn between this guy and the 18v version but this one was also much smaller and lighter so I was really hoping it would be a good choice and from your video it was. I really appreciate this style review because you show it in an actual real world work flow it it seems to perform admirably.
All of the m12 "serious" tools such as the impact driver/drill or hacksaw/ impact stubby will literally drain the 2.0 battery under heavy load in a couple of extended uses. I cant speak for the larger cell battery with it but I would say it's almost a must. Personally I have a ton of m12 batteries and I don't mind swapping but out in the field again larger ah batteries
Thank you for the review. Have mine on preorder. I purchased a 1/2 mid torque a month ago and love it. This will add to the arsenal. Also have a the 3/8 electric ratchet. Love Milwaukee
Great stuff as always. However one thing that would make a big difference in some of the fastners it struggled with is using IMPACT sockets. The thickness of impact sockets does make in difference. Using chrome vs impact you are not going to get as much grunt from the tool. Love the channel just giving my two cents. Keep up the good work
Great review. I just got the m18 mid torque 1/2". This is next on the list to replace my old m18 3/8" impact. 250ftlbs is pretty amazing for this size of tool.
@@meanodustino9563 I have found it does 80% of what my 1/2" air gun will do. I like being able to work without hooking up to air. One thing I will say is it's really loud, hurts my ears.
Wow, all that on one battery. I was looking at one of these at my local tool place. I should have grabbed it. Really like the 10 ft lb tightening setting. Didn't know at the time that was there.
I would have liked to see you try the 4.0 battery on the bolts you couldn't break free with the 2.0 battery. Often times the 4.0 will provide more power.
When do you use impact sockets? Wondering what I need to buy. Pretty safe to use chrome sockets on 3/8 stubby? Maybe have 1/2 impact sockets the mid and high torque models?
Real good vid dude. I just purchased an M12 stubby 3/8 based on yours & others recommendations. Keep up the good work. I'll use it in my channel, 316 Automotive.
You should try using impact extension and sockets. I don't know the science behind it but sometimes it will take stuff out that a chrome sockets and extensions won't.
Awesome video. I really like the stubby impact and I recently bought the 1/2 inch m12 ratchet. Although in a way I wish that I would have bought an impact like this first I do think the m12 ratchet is the safer of tools to use and a bit more balanced. For example if you forget to set that impact on mode 4 and shoot a bolt right through a plastic sensor housing or whatever. I noticed you had the m12 ratchet on the side of the car as well. I plan to just have the whole collection and this stubby 3/8 might be next. I'm surprised at the power as well.
hey bud use them both and love them. The Stubby has a Veraval trigger that is very controllable. Along with the level controls. You will be happy with one. Thank you for watching!
Great job on showing the use of new m12 fuel stubby 3/8 impact in real situations. Could you do as size comparison between the current m18 compact fuel impact wrench and the new m12 stubby impact?
What about a 3/8 with a 1/2 step up adapter? Difference? I'm contemplating on the 3/8 for minor jeep repair, ball joints, control arms for a DIY home repairs.
@@jat-justamaturetech-philpj8285 no. I had the 3/8. Was not worth it. I use the 1/2 inch for everything. If I need 3/8 sockets I just use the converter and turn the torque down. You don't regret it.
I picked this up but also have the same size cordless ratchet. Would you recommend I switch the 3/8 impact wrench to the 1/2? If so what benefit would come of it since I'm seeing they both have the same power. I'm going super lightweight and compact with my setup. So my main idea was to go strictly ratchet and if need be use the impact wrench to break loose any fastener the ratchet would initially have trouble breaking. a breaker bar for anything the impact can't handle. Also would you recommend getting just impact sockets or not a good idea? I have regular chrome sockets but I'm in the process of building a whole new set that I'll be using for mobile work. I want to travel light and leave the specialty tools in my vehicle until called upon. So it's a special setup with efficiency and as effortless as possible. I don't want to be dragging around 2 sets of metric sockets in a big heavy toolbag. If anything a secondary set will be in my vehicle. What do you think about my setup idea? Any ideas or problems I might face with doing this?
Ricardo think for yourself if your actually doing mobile mechanic work then you should have at least a spec of common sense and the ability to think for yourself.. they say there's no such thing as a stupid question but I could see you regularly receiving a stupid answer back.... SMH
How to Automotive if I can get the wife on board I’ll definitely pick up the 3/8”. I think it would fit my needs best. I work on heavy duty Diesel engines and I use 3/8” and 1/2” stuff mostly. I have the 1/2” high torque and 3/8” m18 fuel impacts. The best answer would be anything red that says Milwaukee!
3/8 has a wider range of sockets personally, the only time I need 1/2 inch if your doing suspension or subframe work which will require more horse power than 250ft lbs and I'd rather use air at that point
I have the Milwaukee m18 3/8 with the 5amp batteries. How much noticeable weight difference do you feel between the stubby 3/8 and the one I have? I use the m18 every day.
All my battery tools are Makita but unfortunately Makita doesn’t make this kind of small impact. I need one for engine bay work and all the 18V are too big and clumsy. This with the 2Ah battery looks compact enough for the job. Can’t wait to get my hands on one of these.
It’s an amazing tool! I would recommend upgrading to the 2.5 amp hour High Output battery. It’s the same size as the 2.0 but with a little bit more amperage for more power.
Great review imo the best really dont need this tool but man do really want one lol enjoyed watching you do all the work with the smalller battery to show the power of this tool 👍
Which would you prefer in your road side kit? The 3/8 or 1/2? Id be dealing with vehicles with mostly 90 at 19mm so I know it can do it. I have my father's 1/2 high torque at home so that would take care of the big items. I also have both 3/8 and 1/2 impact sockets.
For those of you that have asked how they can tip me. You can now click the “super thanks” button and add a tip. Grateful for all my viewers and subscribers! This channel would be nothing without you.!
I got the 3/8 stubby a few weeks ago for automotive use. Amazing tool! Just love how compact and powerful it is. I love using it so much, I'm walking around the house looking for something to fix. LOL!
I know exactly how you feel :))
Does it crack bolts pretty good? Like caliper mount bolts on fords ?
I hear you. Every time I bought a new tool I always try to find something to fix and sometimes I even fix something that didn't require fixing just to use the new tool. I think I have a tool addiction. My wife always say "What! you buy another tool?" and I said "No, just a new toy".
@@alexyu6928 I know I just got my impact driver and I didn't need it but hey who said I can't buy another one I'm addicted to tools.
Much better video than most other videos I’ve seen, shows how versatile it is rather than just undoing wheel nuts with it. Thanks for the video
Thank you for watching!
I recommend using impact rated sockets and extensions for minimal torque loss but overall fantastic demonstration of this tool
Finally someone does something with the stubby other that take on and off lug nuts! bravo!
I try to use them how they’re made to be used.
try 3/8 impact sockets they make such a difference when taking off bolts
That impact graded extensions. Well said brotha
This makes a hughe difference. You dont lose so much torque with impact sockets and especially extensions.
So those were not impact sockets? Do you find them getting damaged? I’m tossing up wether to run it with reg sockets or get some impact rated.
tim a always use 6 point impact grade sockets with an impact
Isaac D that’s what I figured. I have noticed some finish damage on sockets before and that was just using the 1/4” hex impact driver with a socket attachment.
I got this tool for small engine repair. This tool is able to do a lot! Hight recommended
Your tool reviews are great because they involve actual use by someone with a lot of experience. The tool worked well in this video but it had some problems when using an extension. Special rigid extensions are available for impact tools and they might help you get the job done a little faster.
Thank you for making this video, great job! As a diy'er I just ordered this for Black friday, got a great deal on it, and am really looking forward to using it under the hood. Your video answered a lot of Q's I had as to how it would do, it's limitations, and where it would work well. Thank you!
Glad you like the video. You’re going to love the stubby!
57 thumbs down? what?? This is a meaningful, practical review, not just endlessly driving bolts in and out in areas with unrestricted access. What would have been REALLY handy for me - being selfish - would have been showing a non-compact wrench trying to reach those tight spaces as well, to get some idea of how often you'd have to resort to manual methods. Great video though, really helpful.
paul tester glad you like the review. Thank you for tips. Not everyone is a fan of Milwaukee Tools and they think they’re hurting him by putting bad conversations and thumbs down on peoples videos. It’s the same people But do it in all kinds of reviews. I pay them no attention.
Use impact sockets and extensions it makes a difference
Left Handed Archer no it dosent, I use chrome sockets with 3/8 impact stubby all the time. It makes no difference at all, some impact socket sets sit very loose on the tool. Chrome sockets fit tight and right
@@dredaypoop7944 that is false my friend. Chrome sockets CAN work but they are not designed for an impact.
@@dredaypoop7944 Chrome sockets are too hard for impact use, you will be wearing out the anvil inside the tool a lot faster than if using the correct sockets. Chrome sockets have also been known to shatter under impact too, bad enough to cause injury
@@dredaypoop7944 look it up online it does in fact make a difference do your research 💯
Have you seen a chrome socket violently destruct? They send pieces flying everywhere, be careful.
Really appreciate you going over how to use it when putting the fastener back in. I've always wondered how to do that without over torquing them.
@@Jasonrcsd glad you like the review. Thank you for watching!
Bought this to help tear down the front and rear suspension to install some lowering springs on my car and it worked like a DREAM. I only had to use the 2Ah battery and still had 2bars left at the end of the job. Would highly recommend!
Yeah, I couldn’t imagine working without them. Thank you for watching!
Truly excellent review, no one else has showed it being put to use better! Thanks so much...
theonebaz thank you. Do you think your going to pick one up? Thank you for watching!
How to Automotive I decided to pre-order one on faith, still waiting on it to show up and put it to use on a few brake jobs on two of my less-driven vehicles... Looking forward to the form factor and that 4th setting seems incredibly useful, which you really showed well. Cheers!
@@HowtoAutomotive hey where did you order yours i ordered mines of acme tools but it has yet to ship?
I should have my 3/8 stubby next Monday when the Cornwell guy comes back. I should've had it this Monday, but it just shipped that day. Cornwell had a promo going on for the new m12 stuff. I picked up a m12 1/4 ratchet with a free battery. and then the 3/8. stubby kit I haven't even been able to use the ratchet yet because Tuesday I got sent home early from work because they were going to close the highway due to flooding.
every mechanic and diy guys need to have these.
I agree!
I bought one off the Cornwell truck not too long ago and I must say, I’m super impressed by this bad ass tool
Make a huge different if you use impact socket and extension
Also use XC 4.0 or XC 6.0
the new High Output even more powerful
Maybe using impact rated sockets, Allen's, and extensions would make a difference. There is a reason why they make them in impact rated versions.
I have 3/8s and I run a 6.0AH battery and i pulled the cab off a 2012 chevy duramax and did headgaskets on it from start to finish the only bolts I didn't use it on was the headbolts that I broke loose then ran the headbolts out with it amazing gun
I bought this tool a while back and it’s absolutely my favourite tool in my box
I had to replace it once though as the circuit board failed although I’ve never dropped it or gotten it wet.
Not sure if this is a common problem.
Milwaukee gave me a brand new replacement and so far so good.
I’m very happy with it as it has amazing power and comfort for everyday automotive use.
I know that engine had it in my 95 xle gold trim Camry then yrs later I had a 2000 Lexus es300. Loved that engine had 248,650 and 206,785 before I sold it this summer. Ran flawlessly
Lexus makes an amazing car.
Really good job demonstrating this tools abilities, thank you. I plan on buying one soon, I just bought the M18 FUEL 1/2" High Torque impact wrench & the FUEL M12 1/2" Ratchet Wrench. I'm 54yrs old & just switched to Milwaukee Tools from DeWalt. I really like Milwaukee Tools innovativeness & thinking outside the box. I like their backpack vacuum, cordless soldering iron & cordless heat gun too I'd like for Christmas :-) Subscribed just now. Please do more videos like this.
Good video. Have you tried using the 4Ah battery? It may give you the torque needed for removing those reluctant fasteners. Some cordless tools don't produce max power when using the compact battery.
Its the only tool i keep in my automotive bag. I have drowned it in trans fluid, oil, and coolant. I have dropped it and left it out in the rain. The head is a tiny bit on the big side but it makes up for it in power. Worth every cent I spent on it. ($100 for tool, $50 for 8-22mm impact socket set, $60 for 6.0 battery, charger, and bag. All picked up locally from FB marketplace)
I love the fuel impact
Me too!
Incredible. I can't imagine what the next generation will do. Time to upgrade my kits. This is exactly why I'm team red. Great video.
Alucard Milwaukee makes amazing Tools for sure! That you for watching.
Great demonstration of this tool. Fast and to the point.
Thank you!
You had a great project car to give that tool a good test. I appreciate the information.
wyattoneable Kind of lucked out with the car. Thought it would be the perfect way to demonstrate it.
Nice impact and all, but that old Camry is super clean.
Stephen MacArthur it’s better now. Do you think you will pick one of the Stubby up?
I have a full line of Milwaukee M12 tools brushless an m18 brushless also thanks Milwaukee for the great power tools.
They are the best. Thank you for watching!
Milwaukee is Power an Quality 💪
Jacob Sebastien I agree. Thank you for watching!
Good job man. This is an excellent tool review- ever!!!!
Mechanics are geniuses.
lol thank you!
I will buy it soon...i bought half series milwaukee best product ....👍👍❤️
I just got one 3/8 for 90 bucks on offer up brand new. Cant wait to do side work with it
you prob got the bushed version
I got one of these last week and it is awesome.
Pete Carter glad you like it. You should be very productive with it. Thank you for watching!
Have you done any suspension or brake jobs? They have the same exact power as the 1/2
Enjoy your videos, very through and concise. I was able to obtain this tool due to your review, someone bought it for me after I did a brake job. I have quite a few Milwaukee tools due to your reviews, all of which have been purchased for me as gifts, due to the work I have performed on there vehicles.
Brian, Thanks for a great informative video, i have purchased the high torque and mid torque Milwaukee's and LOVE em. They make the best quality cordless tools hands down.
Congratulations on picking those up. I agree them do you make the best Impacts. Thank you for watching!
Good video I just got my little 3/8 stubby today and I have a 82 Chevy 1 ton truck and I went out there and it took the lug nuts off no problem
Well done!!! I am impressed you were able to take out those long bolts that hold the motor mount bracket!
I find that running the 3mah larger 12v batteries gives you the whack to get those bigger bolts out. The same is true for the cordless ratchets. More battery= more woopow! Good video ive yet to add this tool to my milwaukee collection but its next on the list!
Travis Hicks definitely a good one to have in your collection. I Would be curious how much extra power I put out.
@@HowtoAutomotive it’s a pretty large difference. There’s a large testing channel on RUclips that showed this impact breaking away 475ft/lb after about 10 seconds with the 6.0 battery
Ordered it. Cant wait to use it.
Been loving my stubby Milwaukee so far.
Just bought the 3/8" stubby Milwaukee the other day & cant wait to use it. Awesome review
Nate Dowd glad you like it.In about three weeks Milwaukee tools is send me back to their new tool symposium where they unveiled all their new stuff for the new year. So I will be making a video about what’s coming out in the future make sure you subscribe for that and click the bell. Thank you so much for watching!
Man, Awesome review for a guy like me wondering if this tool can be used to work on my car at home, specifically for doing a break job. I had concerns about the battery life being a 12v and for a home gamer it clearly has more than enough. I was really torn between this guy and the 18v version but this one was also much smaller and lighter so I was really hoping it would be a good choice and from your video it was. I really appreciate this style review because you show it in an actual real world work flow it it seems to perform admirably.
All of the m12 "serious" tools such as the impact driver/drill or hacksaw/ impact stubby will literally drain the 2.0 battery under heavy load in a couple of extended uses. I cant speak for the larger cell battery with it but I would say it's almost a must. Personally I have a ton of m12 batteries and I don't mind swapping but out in the field again larger ah batteries
Thank you for the review. Have mine on preorder. I purchased a 1/2 mid torque a month ago and love it. This will add to the arsenal. Also have a the 3/8 electric ratchet. Love Milwaukee
in order to remove the heavier-duty bolts just install the heavier-duty battery that came with your kit and they'll come out much easier
Great stuff as always. However one thing that would make a big difference in some of the fastners it struggled with is using IMPACT sockets. The thickness of impact sockets does make in difference. Using chrome vs impact you are not going to get as much grunt from the tool. Love the channel just giving my two cents. Keep up the good work
Exactly. Use impact sockets and impact extensions...makes a big difference, Surprised these guys are using regular sockets on an impact driver
I'll be honest I absolutely love mine as well.... amazing tool!
daniel armstrong I agree. Thank you for watching!
looks like i know what im getting myself for xmas
Great video as always. I just bought myself one after watching your very informative video
Thank you very much for all of your advice....
You made a great decision. Glad you like the videos thank you for watching!
Very Nice Impact Driver.
Wow...really well done and we'll edited video! Been thinking about getting this tool.. I'm impressed.
You will love it. I use it every day. Thank you for watching!
This video answered all of my questions! 100% buying this!
roadster i’m sure it’s gonna be a great tool for you. Thank you for watching!
Brian, how in the world do you keep up with all the bolts you take off? WOW!
Jessie Martinez I’ve been doing it for 25 years now Plus I have a system.
Jessie Martinez is keeping track something you struggle with?
I'm not a mechanic. I do some maintenance on my cars. I'm interested in the Stubby and came across your video, which I thought was excellent.
How to, do you see the motor as a pyramid also?
Michael StJohn I may just have to make a video and how I keep track of all the fasteners.
Absolutely love everything I’ve tried from Milwaukee. This looks awesome as well!
ec1ipse14 it’s amazing tool. I use it everyday in the shop.
Excellent review of this tool! I love the innovation Milwaukee is putting into their tools!
Phillip Cabaniss thank you! Yes Milwaukee is doing it right.
I love watching your videos! I'm just now getting into the m12 line, and I think I may have to pick one of these up!
They are awesome !
Great review. I just got the m18 mid torque 1/2". This is next on the list to replace my old m18 3/8" impact. 250ftlbs is pretty amazing for this size of tool.
jordan love the mid torque. I was impressed with the power of the Stubby for being a M12. Thank you for watching!
Everyone like the mid torque but I don’t. I find it struggles Alot and really its not much stronger than my 1/2” compact. Maybe I have a dud?
@@meanodustino9563 I have found it does 80% of what my 1/2" air gun will do. I like being able to work without hooking up to air. One thing I will say is it's really loud, hurts my ears.
Wow, all that on one battery. I was looking at one of these at my local tool place. I should have grabbed it. Really like the 10 ft lb tightening setting. Didn't know at the time that was there.
That's a handy little machine for mechanical work , too much bro thanx for great video 👍
For stubborn bolts, I wonder if a touch of tighten ahead of the loosen would help
I would have liked to see you try the 4.0 battery on the bolts you couldn't break free with the 2.0 battery. Often times the 4.0 will provide more power.
Eric White I’ll make follow videos. Featuring the long Jevity of the tool and I’ll make sure I include that.
Great video! I ordered the stubby yesterday.
I will use air tool to do auto transmission sump, electronic tool hard to clean oil,
When do you use impact sockets? Wondering what I need to buy. Pretty safe to use chrome sockets on 3/8 stubby? Maybe have 1/2 impact sockets the mid and high torque models?
Real good vid dude. I just purchased an M12 stubby 3/8 based on yours & others recommendations. Keep up the good work. I'll use it in my channel, 316 Automotive.
Great video. I use impact stubby and swivel sockets, you get less torque loss than chrome sockets.
Yes I need to invest into more 3/8 Impact Sockets.
Harbor Freight impact or Tekton from amazon. Cheap and work great.
Use the 4.0 battery and it will be stronger
@@jeremyoetken2094 Nope. all you get is longer run time, not more power.
@@Neur0bit From all the videos of testing i've seen, bigger batteries do give more power.
You should try using impact extension and sockets. I don't know the science behind it but sometimes it will take stuff out that a chrome sockets and extensions won't.
Good for my tool kit ......want to have one soon
Antony Pereira I just uploader a review video on the 1/2 Stubby check it out ruclips.net/video/3GKWL2i4Zog/видео.html
I bought the big battery for mine and power took a significant jump from the compact batt!! This thing is an ass kicker.
It amazes me all the time. I’ll think no way will it take this bolt off and it does.
Yeah the battery and sockets make a difference. This is an amazing tool.
Awesome video. I really like the stubby impact and I recently bought the 1/2 inch m12 ratchet. Although in a way I wish that I would have bought an impact like this first I do think the m12 ratchet is the safer of tools to use and a bit more balanced. For example if you forget to set that impact on mode 4 and shoot a bolt right through a plastic sensor housing or whatever. I noticed you had the m12 ratchet on the side of the car as well. I plan to just have the whole collection and this stubby 3/8 might be next. I'm surprised at the power as well.
hey bud use them both and love them. The Stubby has a Veraval trigger that is very controllable. Along with the level controls. You will be happy with one. Thank you for watching!
You needed to use the 4amp battery to get a little bit more power
Great job on showing the use of new m12 fuel stubby 3/8 impact in real situations. Could you do as size comparison between the current m18 compact fuel impact wrench and the new m12 stubby impact?
Hey Brian aaawwwwsome vid can't wait til mine arrives make sure I get the boot for it
Working Hands Automotive I need to get the boot. It’s not going to say nice for long with out it.
I think the best version for us mechanics is to get the 1/2" stubby with a 3/8 step down adapter. Best of both worlds.
What about a 3/8 with a 1/2 step up adapter? Difference?
I'm contemplating on the 3/8 for minor jeep repair, ball joints, control arms for a DIY home repairs.
@@jat-justamaturetech-philpj8285 no. I had the 3/8. Was not worth it. I use the 1/2 inch for everything. If I need 3/8 sockets I just use the converter and turn the torque down. You don't regret it.
I picked this up but also have the same size cordless ratchet. Would you recommend I switch the 3/8 impact wrench to the 1/2? If so what benefit would come of it since I'm seeing they both have the same power. I'm going super lightweight and compact with my setup. So my main idea was to go strictly ratchet and if need be use the impact wrench to break loose any fastener the ratchet would initially have trouble breaking. a breaker bar for anything the impact can't handle. Also would you recommend getting just impact sockets or not a good idea? I have regular chrome sockets but I'm in the process of building a whole new set that I'll be using for mobile work. I want to travel light and leave the specialty tools in my vehicle until called upon. So it's a special setup with efficiency and as effortless as possible. I don't want to be dragging around 2 sets of metric sockets in a big heavy toolbag. If anything a secondary set will be in my vehicle. What do you think about my setup idea? Any ideas or problems I might face with doing this?
Ricardo think for yourself if your actually doing mobile mechanic work then you should have at least a spec of common sense and the ability to think for yourself.. they say there's no such thing as a stupid question but I could see you regularly receiving a stupid answer back.... SMH
now that's an honest real world review !!! 👍👍👍
real world test !! nice! great video very very useful
really excellent demo, thank you!!
Thank you and thank you for watching!
The tools work like a champ! Nice demo Brian.
Ozzstar thank you Glenn!
Mine struggle to remove some wheel lug nuts due to them been put on by an air power wrench from the shops.
Subscribed, Excellent demonstration I’m sold on the kit👍🏻
andrew jones thank you for subscribing! You will love the Stubby. Thank you for watching!
Awesome review Brian. Thanks for your awesome content. Nice Milwaukee shirt too!
zack mcclain thank you! Are you going to pick one up? If so witch one do you like 1/4, 3/8, or 1/2?
How to Automotive if I can get the wife on board I’ll definitely pick up the 3/8”. I think it would fit my needs best. I work on heavy duty Diesel engines and I use 3/8” and 1/2” stuff mostly. I have the 1/2” high torque and 3/8” m18 fuel impacts. The best answer would be anything red that says Milwaukee!
zack mcclain just tell her that you can get your work done faster and get home to her sooner👍🏻
How to Automotive I’ve never tried that. I’ll give it a shot!
zack mcclain let me know if it works if it does I’ll try on my girlfriend. Lol good luck!!
Next tool I'm adding to the connection!
Billy Highfill nice I use it everyday and love it 👍🏻
Wow that is a great tool. Getting it soon. Thanks for sharing.
learningfromthebest now you will love it. Thank you for watching!
Loctite! Turns 50 ft lbs torque on a bolt into 250+ breakaway torque.
That's 1 reason why he could not break some bolts loose with the impact.
bs
Great review. On my wish list. Would you recommend the 3/8 over the 1/2 inch stubby.
Darren Farrell I like 3/8 only because I have more 3/8 socket options.
3/8 has a wider range of sockets personally, the only time I need 1/2 inch if your doing suspension or subframe work which will require more horse power than 250ft lbs and I'd rather use air at that point
If your going to go half inch go with the half inch full size mid torque.
@@Dieseldaddy519 I mean you can always use a torque wrench instead of ugga duggas
We all love Big Red... But that shirt... Haha
RAM TRUCKS lol Milwaukee gave it to me why not😎
@@HowtoAutomotive
Looks good man!
I have the Milwaukee m18 3/8 with the 5amp batteries. How much noticeable weight difference do you feel between the stubby 3/8 and the one I have? I use the m18 every day.
Good question
Milwaukee put the rating at 3lb but thats with the 4.0 battery, i belive its 2.3lb or 2.lb4 with the 2.0 battery
Big difference. I just got my stubby and it's way lighter and the m18 battery is bulky unlike the m12"s
Anyone know if the anvils can be swapped between 1/2 & 3/8?
Yes. Haven't done it myself but the only difference between the two is just the anvil.
Can you use regular sockets with the 1/4 stubby
How come you didn't use impact sockets? Won't the impact wrench ruin non-impact sockets over time?
All my battery tools are Makita but unfortunately Makita doesn’t make this kind of small impact. I need one for engine bay work and all the 18V are too big and clumsy. This with the 2Ah battery looks compact enough for the job. Can’t wait to get my hands on one of these.
It’s an amazing tool! I would recommend upgrading to the 2.5 amp hour High Output battery. It’s the same size as the 2.0 but with a little bit more amperage for more power.
Great review imo the best really dont need this tool but man do really want one lol enjoyed watching you do all the work with the smalller battery to show the power of this tool 👍
209chevymon you can definitely do all these jobs with out this Impact but having it sure is nice. Thank you for watching!
The best review of the tool yet but should jave used the bigger battery gives you more power for full break away torque
htc one i’ll be doing more reviews on it for sure and will keep that in mind. Thank you for watching!
Which would you prefer in your road side kit? The 3/8 or 1/2? Id be dealing with vehicles with mostly 90 at 19mm so I know it can do it. I have my father's 1/2 high torque at home so that would take care of the big items. I also have both 3/8 and 1/2 impact sockets.
Would be nice if Milwaukee included a dual voltage charger with their M12 kits.
You can’t use chrome extensions on impacts it robs the power wayyyyy more than impact rated extentions
Love to see this vs a Snap On CT761 in a real world test.