Please stop editing these maintenance videos. Newbies like me wanna see every movement in detail. Thats how i learn. I dont care if the video is an hour long. Lemme see every single motion. Thanks for posting, saved me a ton of time n money
What is the purpose of the last friction plate being rotated 1 notch in the basket from the rest? You mention this twice in the video, so it must be important.
On a Z1000 2006, the pressure plate has a dot marked on it, you have to aline it to the inner basket, notice here he took off the pressure plate and just put it back on any way as long as the castellations met, also he fitted a metal plate first, again on my Z1000 its a friction plate first! surely all Kawasaki clutches would be the same? And like everyone else what does this cushion kit do? Just looks like a spacer to me!
04 05 zx10r doesn't have the flat washer and the concave washer .They got the double sided steel. Do I need to eliminate the double sided steel plate and get the flat and concaved washers?
If you are having issues with your stock 04/05 - look at the condition of the inner and outer hubs. We have had good luck with the spring plate in the past.
BP....got a clutch problem .... I THINK. first time replacing a clutch rings steel and fiber. got an 07 Ninja ZX6R. my initial problem was the head of the clutch rod wore out due to the actuator spring being broken. now everthing is out back together, i did a dry fit to see if the rod/actuator would open (clutched). However nothing is moving and it seems likes it stuck. do i need to add the oil
I have a 2009 ZX10R. What could be causing a hard vibration or shutter when I let the clutch out in first gear? I'm going to check the clutch basket rivets
@@BrockDavidson Tell me please. I also have a vibration when starting in 1st gear. I changed the gear shift rod to a reinforced one from the 2010 version. I forgot what it was like before. BUT now there is a vibration when starting from a stop in the first gear.
That depends on the bike. We make clutch mods to remove or disable the slipper that causes the chatter: brocksperformance.com/clutch-components/clutch-mods/ (use the shop by bike option) - if you already have a mod, you might have a worn out clutch basket: ruclips.net/video/_YFqq5kI-fw/видео.html
To make room the the cushion. We increase the spring pressure to compensate for the 10% reduction in friction created by removing the plate (+ even more). This makes for an incredibly smooth launch that can still take BIG power: bit.ly/368DpZO
With our cushion kit installed, yes. In the stock application, the judder spring and washer are typically inserted into the second fiber back (in has a larger hole in the center). Consult the service manual for your make/model.
Brock Davidson I'm doing the clutch on a 2013 zx10r and person had installed it wrong wondering the anti shatter spring goes on first or second after a friction plate if you can email me @ Awstile43@gmail.com thanks
To allow perfect True Hand Clutch drag strip launches, without chatter or grab - without the need of a lock-up clutch. More info: blog.brocksperformance.com/faq/clutch-setup-recommendation/
Mickey, give us a call at 937-912-0054 and talk to one of our Technicians. They will be able to give you a specifically detailed response that should fix your problem. Answering you isn't possible here due to the limited characters. Give us a call!
Please stop editing these maintenance videos. Newbies like me wanna see every movement in detail. Thats how i learn. I dont care if the video is an hour long. Lemme see every single motion. Thanks for posting, saved me a ton of time n money
I agree
What is the purpose of the last friction plate being rotated 1 notch in the basket from the rest? You mention this twice in the video, so it must be important.
Would this be that same sequence when changing the clutches in the clutch pack?
Do you Recommend using a cushion kit or just the heavy duty springs plus the clutch mod for the 2020 zx10r?
The cushion is for extreem use - big power/big motor/nitrous/turbo etc. The mod and springs are fine for most other applications.
@@BrockDavidson Thanks a lot for your response! This definitely helps
On a Z1000 2006, the pressure plate has a dot marked on it, you have to aline it to the inner basket, notice here he took off the pressure plate and just put it back on any way as long as the castellations met, also he fitted a metal plate first, again on my Z1000 its a friction plate first! surely all Kawasaki clutches would be the same?
And like everyone else what does this cushion kit do? Just looks like a spacer to me!
Great Question! This helps explain what it does: bit.ly/2WJfX2m
this may sound stupid. but what does a clutch cushion kit do?
04 05 zx10r doesn't have the flat washer and the concave washer .They got the double sided steel. Do I need to eliminate the double sided steel plate and get the flat and concaved washers?
If you are having issues with your stock 04/05 - look at the condition of the inner and outer hubs. We have had good luck with the spring plate in the past.
Would the cushion and clutch mod be good for street racing opposed to the track also ?
BP....got a clutch problem .... I THINK.
first time replacing a clutch rings steel and fiber. got an 07 Ninja ZX6R. my initial problem was the head of the clutch rod wore out due to the actuator spring being broken.
now everthing is out back together, i did a dry fit to see if the rod/actuator would open (clutched).
However nothing is moving and it seems likes it stuck. do i need to add the oil
I have a 2009 ZX10R. What could be causing a hard vibration or shutter when I let the clutch out in first gear? I'm going to check the clutch basket rivets
Good start! Could also be a worn out clutch mod. Does it do it if you pull off in second gear?
@@BrockDavidson Tell me please. I also have a vibration when starting in 1st gear. I changed the gear shift rod to a reinforced one from the 2010 version. I forgot what it was like before. BUT now there is a vibration when starting from a stop in the first gear.
Check your outer clutch basket. I have a zx-14 video that explains exactly how and it applies to all bikes.
@@BrockDavidson this is video?
ruclips.net/video/DTWA7hMgZ74/видео.htmlsi=Mf26tMaerIEmCBDd
@@BrockDavidson Please tell me how I can increase the power/speed of my ZX-10R GEN3 2008?
Is there any mod for smoothin 1 gear in when start drive. As now its like hammer
That depends on the bike. We make clutch mods to remove or disable the slipper that causes the chatter: brocksperformance.com/clutch-components/clutch-mods/ (use the shop by bike option) - if you already have a mod, you might have a worn out clutch basket: ruclips.net/video/_YFqq5kI-fw/видео.html
Watched again, your cushion replaces a friction plate! Why?
To make room the the cushion. We increase the spring pressure to compensate for the 10% reduction in friction created by removing the plate (+ even more). This makes for an incredibly smooth launch that can still take BIG power: bit.ly/368DpZO
Why off set the last plate one notch
What year zx10 clutch baskets are interchangeable?
what does this clutch cushion do?? what purpose does it serve, whats the point of it????
It smooths drag style launches.
at reinstallation, the jutter spring and flat spring are the first things to go back in??
With our cushion kit installed, yes. In the stock application, the judder spring and washer are typically inserted into the second fiber back (in has a larger hole in the center). Consult the service manual for your make/model.
ok so its behind the 2nd fiber plate and in front of the first steel plate...got it thanks man your videos help a lot
Brock Davidson I'm doing the clutch on a 2013 zx10r and person had installed it wrong wondering the anti shatter spring goes on first or second after a friction plate if you can email me @ Awstile43@gmail.com thanks
I would recommend installation, exactly per the OEM service manual. A copy can typically be found online via google search.
nice to see such kind of lesson video
will that be the same thing on a 09 ZX6R if I have to change my clutch plate
+Green Goblin very similar, but use an OEM service manual also when doing basic clutch maintenance/service.
what is the purpose of cushion kit?
To allow perfect True Hand Clutch drag strip launches, without chatter or grab - without the need of a lock-up clutch. More info: blog.brocksperformance.com/faq/clutch-setup-recommendation/
why the last friction plate is turned one notch?
I didn’t learn nothing because he skipped the best part 🤦🏾♂️🤦🏾♂️🤦🏾♂️🤦🏾♂️
Why would a clutch cushion kit be needed?
Why was the last friction plate rotated on notch?
it always is per spec
Mickey, give us a call at 937-912-0054 and talk to one of our Technicians. They will be able to give you a specifically detailed response that should fix your problem. Answering you isn't possible here due to the limited characters. Give us a call!
👍🏼👏👏👏
how come he didn't soak the disks in oil
what can i expect after doing this
Please check the Overview and Product Details tab in the product: www.brocksperformance.com/Clutch-Cushion-Kit+I270617+C28.aspx
Judder spring wass install on wrong side
Judder spring has a different task when used with the cushion, so it is reversed.
No it wasn't it's always installed like a volcano always.
Replacion shift in3005zx10
ok