Been using ct1 and multi solve for around 15 years now, mate. Brilliant stuff. Multi solve is Brilliant for felt tip pens and the dreaded blue tack. The first time I saw it was on QVC or one of those selling channels All those years ago
Used the multi solve numerous times to tool Ct1 and it works very well for me. Have read the clear does go yellow thougu so I stuck to normal dow silicone when I needed clear in a bathroom
Hi how can you use the multisolve to remove old sealant but then use it again to smooth out newly applied silicone won’t it break down the new stuff ??? Please note this is not a negative comment but I am about to re seal my shower with these same products and need any help advice possible please reply thank you
hi, CT1 isn't the same as silicne, that is why. I have done this on a kitech last week, used the Multi solve over the old silicne, that helped reove it, then applied CT1 and used the multi solve to smooth it over. it does work like its shown on this video
This stuff doesn't stick to gutters that well, whatever they say to you. Once the gutter moves few days later due to temperature contraction / expansions the CT1 seal will let go and it will sprung a leak (I've tested this multiple times). Also this stuff is the same as Soudal FixAll Flexi (in my experience), but the latter is 3 times cheaper. Soudal also doesn't try to sell you a can of 500ml magic degreaser for £15
There's a few. TimbaBuild Fine Finish, could be used then sanded. Toupret do a powered mix wood filler that might be ok. Prestonett also have fine surface fillers you could get to try.
I used CT 1 resilicone around my uPVC windows . It said to use white spirit to smooth and finish the product. Its a awful silicone to smooth out even with white spirit. It looked amazing for a couple of years . But now windows need resealing as it's gone rock hard and faded from it's colour. I still believe it's the best and hopefully when I get round to repainting my bay windows multi-solve will improve the finish and longevity of the product.
CT1 is good stuff but doesn’t stay white around showers, read the reviews on Toolstation,they actually do BT1 which is meant for bathrooms but I haven’t tried it. The multi solve is good for tooling up and also clean up if you get in a mess and it also works with OBD1 and Works sealant if you prefer them. Keep up the good work Phil.
Fantastic as an adhesive, especially externally. Would never use it (again) as a finished silicone as it doesn't take long before the colour goes, and proper silicones are a little easier to tool. Have found that some water based paints, like masonry, struggle to cover it without crazing even days after it's gone off, and have resorted to spraying it with cover stain first. Tried their PGB Tribrid a little while ago, the grab was insane.
I try to avoid silicone when painting inside as it doesn’t adhere to silicone. This product may be different. As for the tooling spray I would make sure when silicone is applied make sure it touches both surfaces as if you have a gap and the spray goes into the gaps it’s not touched it will fail maybe not straight the way.
@@ProfessionalPainterDecorator not seen that is there one on your channel what’s a good caulk that doesn’t crack I’ve been decorating 32 years and still waiting for a good caulk
I use Red Devil Caulk, no issues there. But watch this video... Bosik and FC1 caulk are all mentioned and shown, ruclips.net/video/T35-DH6jc0I/видео.html
Their data sheet doesn't state you can use it as a smoothing agent 👀😬 i just cant understand this logic, disolves old silicone and yet he's saying to apply it directly to ct1 thats not been cured? Unless it doesnt work on old ct1? On the face of it though, this seems worse than the washing up trick myth 🙈
I think this is much worse than fairy liquid. He just went straight on a round bead with it and smoothed it with his finger (not tooled out the excess) so surely this won't stick on sides.
I used CT1 to install the track for my shower screensin my wet room and it hasnt moved an inch in years now. So strong. But i will say, it is NOT mould resistant, so not the best idea for a bathroom. The clear also yellows fairly fast too.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Been using ct1 and multi solve for around 15 years now, mate.
Brilliant stuff.
Multi solve is Brilliant for felt tip pens and the dreaded blue tack.
The first time I saw it was on QVC or one of those selling channels
All those years ago
I’ve been using CT1 for years it’s the best 👌🏼
Yep CT1 its absolutely brilliant 👍
Wow what a product 😮 I'm defo gonna try that. Thanks for video Phil 👍
No problem 👍
Multisolve is a must when tooling up CT1.
I know, so many have never heard of it as it's never NEXT TO CT1 when you buy it.
Used the multi solve numerous times to tool Ct1 and it works very well for me. Have read the clear does go yellow thougu so I stuck to normal dow silicone when I needed clear in a bathroom
Hi how can you use the multisolve to remove old sealant but then use it again to smooth out newly applied silicone won’t it break down the new stuff ???
Please note this is not a negative comment but I am about to re seal my shower with these same products and need any help advice possible please reply thank you
hi, CT1 isn't the same as silicne, that is why.
I have done this on a kitech last week, used the Multi solve over the old silicne, that helped reove it, then applied CT1 and used the multi solve to smooth it over.
it does work like its shown on this video
@ ok thanks mate I will try it 👍🏻
This stuff doesn't stick to gutters that well, whatever they say to you. Once the gutter moves few days later due to temperature contraction / expansions the CT1 seal will let go and it will sprung a leak (I've tested this multiple times).
Also this stuff is the same as Soudal FixAll Flexi (in my experience), but the latter is 3 times cheaper. Soudal also doesn't try to sell you a can of 500ml magic degreaser for £15
Hi Phil ,
What’s the best product for grain filling on oak doors please ?
There's a few.
TimbaBuild Fine Finish, could be used then sanded.
Toupret do a powered mix wood filler that might be ok.
Prestonett also have fine surface fillers you could get to try.
I used CT 1 resilicone around my uPVC windows .
It said to use white spirit to smooth and finish the product.
Its a awful silicone to smooth out even with white spirit.
It looked amazing for a couple of years .
But now windows need resealing as it's gone rock hard and faded from it's colour.
I still believe it's the best and hopefully when I get round to repainting my bay windows multi-solve will improve the finish and longevity of the product.
CT1 is good stuff but doesn’t stay white around showers, read the reviews on Toolstation,they actually do BT1 which is meant for bathrooms but I haven’t tried it. The multi solve is good for tooling up and also clean up if you get in a mess and it also works with OBD1 and Works sealant if you prefer them. Keep up the good work Phil.
Fantastic as an adhesive, especially externally. Would never use it (again) as a finished silicone as it doesn't take long before the colour goes, and proper silicones are a little easier to tool. Have found that some water based paints, like masonry, struggle to cover it without crazing even days after it's gone off, and have resorted to spraying it with cover stain first. Tried their PGB Tribrid a little while ago, the grab was insane.
Good to know!
Can I do round my bath, instead of repairing a leaking cup.
lol Let me know
I try to avoid silicone when painting inside as it doesn’t adhere to silicone. This product may be different. As for the tooling spray I would make sure when silicone is applied make sure it touches both surfaces as if you have a gap and the spray goes into the gaps it’s not touched it will fail maybe not straight the way.
How about a ct1 caulk review for us painters and decorators Phil
FC1 video?
@@ProfessionalPainterDecorator not seen that is there one on your channel what’s a good caulk that doesn’t crack I’ve been decorating 32 years and still waiting for a good caulk
I use Red Devil Caulk, no issues there.
But watch this video... Bosik and FC1 caulk are all mentioned and shown,
ruclips.net/video/T35-DH6jc0I/видео.html
@@ProfessionalPainterDecorator thank you Phil
Their data sheet doesn't state you can use it as a smoothing agent 👀😬 i just cant understand this logic, disolves old silicone and yet he's saying to apply it directly to ct1 thats not been cured? Unless it doesnt work on old ct1? On the face of it though, this seems worse than the washing up trick myth 🙈
I think this is much worse than fairy liquid. He just went straight on a round bead with it and smoothed it with his finger (not tooled out the excess) so surely this won't stick on sides.
That man could sell sand to Egyptians!
I used CT1 to install the track for my shower screensin my wet room and it hasnt moved an inch in years now. So strong.
But i will say, it is NOT mould resistant, so not the best idea for a bathroom.
The clear also yellows fairly fast too.
Thats great gear can we smoke it😂
He just contradicted his self with the multi solve, first he said it will remove silicon then he put ct1 on the paper and sprayed it with multi solve
CT1 isn't silicone though
Its been around for years and years. Good stuff but very overrated and overpriced.
Too pricey
compared to what?