Powder Coating an entire Predator 212cc engine!
HTML-код
- Опубликовано: 8 сен 2024
- On this Episode of Praska Boy's Garage I powder coat and entire Predator 212cc engine that will be going into a 1969 Rupp Scrambler mini bike. I have always wanted to try this and wondered why I've never seen it done before. Well I know why now, it was a lot of work!!! It was so much fun building this engine and I would absolutely do it again! Thank you for watching, and like always, I will see you on the next one!
Dan's Channel Rim Right: Click the link if you want to see more powder coating videos!
/ @rightnowpowdercoating
Thanks for watching!
Copyright Free Music used:
Adventures by A Himitsu www.youtube.co....
There It Is by ZAYFALL / zayfallmusic
All Night by Ikson / ikson
JPB - High [NCS Release] • JPB - High | Trap | NC...
We Are One by Vexento / vexento
Ikson - Last Summer Video Link: • Ikson - Last Summer (V...
Great Job, looks awesome. Thanks for the shout out!
Rim Right Absolutely Dan! I appreciate your help on this one! Now it’s time to make that mini bike look even better!
Hopefully you have more uploads for us. I know it is a bad time with covid 19 but i for one cant wait for your next video. Thanks for your time. We really appreciate what you do.
Thank you so much for positive comment! I took some time away from RUclips filming because we had a baby girl in April, so I've been spending all my time with the family. Now I am ready to get back and the next project is currently on the table! It will be broken up into a series so I can post more content faster than every 6 weeks!
Awesome video!
Glad you enjoyed it!
I enjoyed the video, great work!
Thank you very much!
Yeah!!!!!! You finally uploaded!!!!
Jacob Faust YES!!!! I promise not to make you wait as long until the next episode comes out!
@@PraskaBoysGarage yeah!!!! I love your vids because I do the same thing and it's always nice to see another motorhead on youtube. Keep on doing what you're doing. Can't wait until the next vid.
I'm no professional by any definition of the word but this is my hobby and Im glad people like to follow along in the shop with me! I'll be out of the shop for the holidays but back to business next week! I look forward to hearing what you think of the mini bike when I'm done!
@@PraskaBoysGarage I bet the mini bike will be awesome!!
Thanks for heart-ing my comment
Nice job. Awesome to see people that take pride instead of just get it done. Now move closer to me so I can hire you fro time to time. I pay in excellent Margaritas. haha
Lol, Thanks!
Just waiting for your video
ahmad salim Big plans for 2020! Stay tuned!
That’s clean !!!
So clean! I’m stoked and can’t wait till I do some more for my racing buddies for their clone motors!
Praska Boy's Garage cool !! Make sure to post it on RUclips !!!thanks.
Excellent
HannsGruber Thank you!
Wow Looks good
KE0OUR Thank you! I can’t wait to see it on the mini bike!!!
You deserve more views and subscribers hope your channel grows
Thank you very much! It has been crazy lately but I plan to start my next video soon!
Another great video -FRG
Thanks brother, I appreciate your support!
Thats all i wanted to hear and congrats on yor new daughter, or congrats to your wife.take care...
Thank you!
Wow! Very impressive and been waiting for another great video! You are a hard worker and i know your channel will do very well. Thanks and could use a lot more videos ; ) Also did you put 18 lb valve springs in it? The motor also needs a PBG sticker on it!
Thank you so much for your support! I kept the springs stock for now. I’ve got a set of rockers and springs but I’m going to wait and see the performance with the carb first. Stickers are currently in the works! Thanks again and I promise not to make you wait as long till the next episode comes out!
Looks really good. One suggestion is the billet oil caps from Arc Racing.
Dude...I've been using ARC flywheels for years on my race kart builds, but I have never seen the oil caps before. Just bought them! Thank you for the recommendation!!!
Praska Boy's Garage Your welcome. Now that gorgeous is engine is complete.
Fantastic I'm hooked any way we can get a video on that powder coating station build. I would live to know how that was built and build one myslef.
It's been requested a few times now! I think I'm going to do that!
Thumbs up.
Love it! Thanks brother!
I’m LOVIN the channel brother. Just started watching. Great content.
Glad you did! Thanks for watching!
You son of a gun! I thought I was original with painting my atv engine white. But just seeing this now disappointed me but also made me happy for you. Good job my boys keep it up. I bought that predator motor a few days ago still in box. Not sure what I am going to do with it. Wish I could do a nice video like you. I'm building a (fill in here) quad. It's going to be revealed when done...
Lol, thanks! I actually have more experience with predators and clones than I do with the ATV motors. The mini bike project this motor is for originally had a white Tecumseh back in 1969. My plan is to find an original motor but in the mean time this predator will have to do! Just sent off a few more pieces to powder coat to finish the mini bike up!
any way we can get a video on that powder coating station build. I would love to know how that was built and build one myself.and how it works. hope you do more builds soon. your awesome love watching your channel
Thank you for the support! I'm no powder coating expert but once I get a little more time with my set up I will do a DIY powder booth video! If you want to send me your contact info to my email I will gladly facetime with you and show you the set up!
Awesome video 🔥🔥🔥🔥 I cant wait until part 2
Thank You!!! Love the name btw, if your into raptors say tuned because in 2020 I will be rebuilding my sons Raptor 90 for him! We need help with color options! Any ideas for the frame and plastics?
@@PraskaBoysGarage Thanks man...ill stay tuned in waiting on that video...Go with black frame and blue and black plastic 😂
I think whatever color u do go with is gonna be awesome 🤘🏾🤘🏾🤘🏾👍🏾👍🏾👍🏾
700r.Raptor. Life We currently have 2. One has blue plastics and the other is white and red plastics. Only going to do 1 of them. We were thinking maybe a bright blue frame with black plastics or possible a bright red frame with black plastics and a cool graphics kit. It’s my 8 year olds daily ride so it will come down to him!
Oh ok that’s sounds cool and I know it’s gonna look real nice...looking at ur videos I went and got my boys two 125cc 🤘🏾🤘🏾
3 years later.
Question 1: Is the paint high temp resistant after being baked on? Durable after some use?
Question 2: where’s the link to that little coat system and how much was it and powder?
Question 3: when you doing one black with polished finish tips? 😮
Can you tell me who that ufc belt belongs to. Is it you or someone you know. Inquiry minds want to know. By the way, excellent job on the powder coating. Outstanding as usually!!!
Thanks! I glad you are enjoying the channel. The belt is just fan memorabilia! I am a big UFC fan and the belt is a replica.
thank you sir. I am a ufc fan also and a true supporter of your work. Thanks and keep up the great work!!!
Nice intro!
Paul Le Brun 😆 Thank you! I was wondering if everyone was going to like it or hate it! I appreciate the feedback!
@@PraskaBoysGarage you're welcome
That looks so great! Bigger carb just bolt on with no other mod's to make it run right? Thanks
Rumrunr Jones Thanks! The carb comes with a bigger air filter and the exhaust will be a straight pipe to allow for better air flow. Should be fine. I do have upgraded valve springs and rockers if it needs them! I would like to get a billet flywheel but I would still need a way to charge the coil. To be continued on the next episode!
Roughly how much powder did you use on this motor? Looks super sweet!
what are you using in the orange can.. just regular starter fluid?
Kyle Herber Yes, it’s regular starter fluid. I usually use gas but I couldn’t find my squeeze bottle and didn’t want to wait to here it run!
@@PraskaBoysGarage look forward to more videos! great job on the powder coating!
Thank you!
Hello i notice you rebuild chinese atvs often and may know a good place to source engines or cylinders + heads. I currently have a water damaged 125 trying to save it. Tia ✌
I typically source most of my motor components from eBay. Sometimes ordering directly from the China sellers.
I did this an now piston is tight in bore..did your engine have any over heating issues
Love that worktable setup out of pallet racking. Do you mind sharing the dimensions?
My table was from a display table at a closing Kmart. It is exactly 4ft x 8x to fit perfectly a sheet of plywood.
Whats the powder coat machine make model you using!?
I used the Eastwood Dual Voltage Powder Gun Item #11676 Brand: Eastwood
Hi, I'm doing a 110cc atv that I want to fix up. I want to get off with the wires and suspension and paint the frame and all this. I've never done this before, is it hard? Is there anything I should try?
That is awesome! I will say it can be challenging at times, but very rewarding when your done and riding it for the first time. My advise would be to make a budget first. Look over the entire atv and make a list of what it needs. Then a list of what you want after that. Before tearing it completely apart I would get it running and driving first. The last step should be painting before final assembly. Good luck and let me know if you have any questions!
so did you get on with the project? or did you die inside when he replied? 😀
I have a Chinese ATVs I know it has spark, has no carburetor problems, and I already got it it to run once, but now it won’t fire even with starter fluid
Spark + fuel but it wont fire would lead to a mechanical problem. I would first check valve clearance and make sure you don't have a stuck valve or one with too much slack. If that checks out then I would run a compression test. If compression is low (under 90) then I would find out what leaks and repair. Good luck on the investigation.
Praska Boy's Garage thanks
What is the spray can you are using to test out the motor when starting it ?
I am using generic starter fluid.
Does preheating the parts really help with the coating?
Yes, when you preheat the part the powder sticks to it better. Also it allows for better coverage and reaching difficult spots.
Where do you get your wiring kits and other parts
For wiring kits check out my wiring video: ruclips.net/video/XdLLjDZ155M/видео.html
Links are in the description. I mostly purchase my parts from Amazon if I need them fast, eBay if I need them cheap, or from VMC Chinese parts if I want to place 1 order that has everything I need.
Hey man, love your content, I was wondering where you get your old ATVs and such. Any hoops you need to jump to be able to find good deals? Anything at all would be a great help, thanks!
Not really hoops, just checking Facebook Marketplace every day! There are so many that have broken down and people just store in the back of their garage. When you see the good deal you just got to jump on it quick!
@@PraskaBoysGarage heyy.
I have got an quastion. I have an 200cc atv and i dont have spark i put a new wiring harness on but it still not have a spark. The spark plug is good. But i dont now what to do now
Sorry for my bad english
So where's the video of the mini bike?
Unfortunately I didn't get a lot of views on this video and neither did the power coating of the frame video. I decided to put it off to the side and slowly work on it part time in the shop. You'll see in the back ground of my more recent videos it's on the table almost put back together.
is it okay if I set the inlet valve to 10 and the outlet valve to 15? (110cc atv)
10-15 seems pretty loose. Here are specs for a raptor 90 which a lot of 110cc atvs have similar specs. I would research name brand atvs that are similar to yours and look up their info.
Intake valve0.07~0.10 mm (0.0027~0.0039 in)
Exhaust valve0.07~0.10 mm (0.0027~0.0039 in)
I have a question: I’m going to be building a new Predator 212 Hemi and I plan also painting the engine but I plan on using HD wrinkle black on the entire engine and I’m shaving the edges of the fins just like Harley. What do you recommend on cleaning and prepping since I have done this years ago on my 19771/2 Harley Low rider I also remember having to use my oven to cure the wrinkle finish but don’t remember what I used to clean it in order to look factory like mine did back I the later 80’s. Thanks
I cleaned mine in purple power degreaser and a scrubber, then rinsed it off with carb cleaner, and blew out with an air hose first before sand blasting. In your case, I would say sand blasting would be over kill but rather use a scotch pad over it before you lay down your paint. Good luck on the project, and touch base after your done and let me know how it turned out!
Ok Thanks for the information.
Hey man, please get back to me... I have a 125 gio sports quad, been sitting for years. Won’t start
Fuel, Spark and Compression is the recipe. Does the motor turn over and have compression? Do you have spark? Start there and the story of what you need to do will unfold.
How much for a rebuilt 125cc Chinese quad
Are you asking how much they cost to rebuild or how much to buy one thats been rebuilt already?
What state of the United States are you in? Because he watched your videos and I want to repair my three atvs
Thanks for watching! We live in Iowa.
What's up with the UFC belt is it real? Are you a fighter?
Well, it is an authentic replica! I'm just a huge UFC fan and it some memorabilia that I got a couple years ago!
Where's the update?
I'm sorry! To be honest everything is back from powder coat a while ago and I haven't reassembled it. Life has been busy mostly because we had an addition to our family! Our little baby girl was born last month so all my time has been spent getting ready for the baby and now helping around the house with our 3 boys. I hope to have a routine down soon that will allow me more shop time!
@@PraskaBoysGarage Congratulations to the new baby Girl. Take your time, I don't mind waiting. Thanks again.
Can you upload more lmao grests vids
It's been a little crazy at my house the last couple months. However now that nice weather is coming it's time to get back to work!
hey! I have a 110cc chinese atv. It runs on starter fluid but i looks like it cant get gas. It is gas in the carburator but i looks like it can`t get to the sylinder. Do you have an instagram account? If you we maby could talk there? GREAT VIDEOES!
Sorry I don't have Instagram! My advise, spend the $15 for a new carb. Believe me it's way easier on your mental health and worth the investment.
Dont You make RUclips more?
I'm back in the shop and on to the next project right now! My wife and I had a baby girl in March, so all my free time has been away from the shop and at home with family. Now it's time to get back and my next video will be out soon!
It doesn't make much sense to put it in a wash if you are going to go straight into a blast cabinet....
Washing it is so your media in the blast cabinet doesn't pick up the oil. Just saves on the life span of the media and also so your gun doesn't gum up.
@@PraskaBoysGarage thats what the filter is for....
@@Excentrix54 Look Brian, I not trying to disagree but this blast cabinet doesn't have a media filter. The media sits at the bottom and get sucked up a tube and thrown out the gun nozzle. Then it drops back down to the bottom to be repeated. The only filter used is a water trap filter from the air compressor. This is common practice in large power coating companies.
I know how a blasting cabinet works..... I run a Powdercoat company that has an oven capable of doing a full chassis. There is a filter at the bottom of your cabinet. If there isn't you should probably put it back in.
@@Excentrix54 Okay man, lets settle this. Please send me a link for a replacement filter for my harbor freight cabinet and I will order it.
why isnt the tape melting in the oven? what is this stuff.
and white is the worst color for that engine, candy red and black all the way