10 EASY Steps to Powder Coating at Home. How To Powdercoat
HTML-код
- Опубликовано: 15 май 2021
- In this video we will teach you how to powder coat from your own garage. Show you how to setup your equipment, what equipment to buy and how it all works. The DIY powder coat process is easy and after you watch this you will be able to do it like the pros at Eastwood tool.
***************************
ITEMS USED IN VIDEO:
Dual Voltage Powdercoat Gun: amzn.to/3T5onfd
Colored Powders: amzn.to/3CGoXbZ
Extra Bottles: amzn.to/3CEXqaW
Accessory and Masking Kit: amzn.to/3TpmKZh
Pre-Painting Prep: amzn.to/3TjOVZW
Air Filter: amzn.to/3s1uCoa
Want to go pro? Try This: amzn.to/3MzVFQU
***************************
Sorry the Giveaway is complete...
***************************
Painting Tutorial - How to Paint Bare Metal: • Painting Tutorial - Ho...
How To Paint Aluminum Wheels: • How To Paint Aluminum ...
Bondo and Prepping for Paint: • Bondo and Prepping for...
Spray Paint Testing - Primer VS No Primer: • Spray Paint Testing - ...
Spray Paint Hack: • Tip for Applying Spray...
***************************
If a BleepinJeep video has ever helped you consider returning the favor by:
• Supporting us on Patreon here: / bleepinjeep
• Becoming a Member here on RUclips: bit.ly/2wGeSec
• See what we recommend on Amazon here: amzn.to/2kc6Syn
• Buying a T-Shirt Here: www.bleepinjeep.com/store
• Or Just leaving a kind comment on FB here: / bleepinjeep
***************************
This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee XJ, wrangler TJ, wrangler JK, or any Jeep vehicle, especially the newer Fiat ones. How-to videos may be too intense for some viewers and children under 30 years of age. Please remain seated until the 4x4 ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in Bleepinjeep mirrors may be farther than they appear.
08643 
Авто/Мото
In this video we will teach you how to powder coat from your own garage. Show you how to setup your equipment, what equipment to buy and how it all works. The DIY powder coat process is easy and after you watch this you will be able to do it like the pros at Eastwood tool.
***************************
ITEMS USED IN VIDEO:
Dual Voltage Powdercoat Gun: amzn.to/34SRpKO
Colored Powders: amzn.to/3Lthcdh
Extra Bottles: amzn.to/3oKmXtm
Accessory and Masking Kit: amzn.to/3BjZrIB
Pre-Painting Prep: amzn.to/3uNuATB
Air Filter: amzn.to/3sJOfBo
Want to go pro? Try This: amzn.to/34Eo9aD
***************************
Sorry the Giveaway is complete...
***************************
Painting Tutorial - How to Paint Bare Metal: ruclips.net/video/lWxaMehmubM/видео.html
How To Paint Aluminum Wheels: ruclips.net/video/gIhgyNaKKiQ/видео.html
Bondo and Prepping for Paint: ruclips.net/video/BVZ5tT6-8Eo/видео.html
Spray Paint Testing - Primer VS No Primer: ruclips.net/video/wnQlVgUdfTs/видео.html
Spray Paint Hack: ruclips.net/video/30ciMg8O_Xw/видео.html
***************************
If a BleepinJeep video has ever helped you consider returning the favor by:
• Supporting us on Patreon here: www.patreon.com/bleepinjeep
• Becoming a Member here on RUclips: bit.ly/2wGeSec
• See what we recommend on Amazon here: amzn.to/2kc6Syn
• Buying a T-Shirt Here: www.bleepinjeep.com/store
• Or Just leaving a kind comment on FB here: facebook.com/BleepinJeep
***************************
*This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee XJ, wrangler TJ, wrangler JK, or any Jeep vehicle, especially the newer Fiat ones. How-to videos may be too intense for some viewers and children under 30 years of age. Please remain seated until the 4x4 ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in Bleepinjeep mirrors may be farther than they appear.*
nice
Nothing to this I would love to try this out
😂😂😂😂😂😂😂😂
I’ll never understand why people think it’s a smart idea to make guides on how to do something when it’s the first time they’re doing it…
FYI- Your 250 gun... the link is broken... or out of stock.
When you are planning to do a 2 coat application, never fully cure the first coat! You will not get adhesion between the two coats. only cook the first coat until it just starts to gel then apply the second coat!!!
Fuck yeah dude
Great video, thanks for posting it!
Looks like it stuck just fine, know it all
@@steveg2509 it always looks "just fine" but will chip easier later and not be as durable. Dont be a know-nothing and hate on people who know what they are doing just because you dont.
Truth, it will stick but won't be as durable as it would be when coating over cured powder.
I was just talking to my friend about learning how to Powdercoat things, I’m 68 years old, and it would be a nice hobby to get into so thank you very much for being on RUclips
Amazing ! American Salesman talks down to you while showing you his Wares ! Thankyou.
As a professional house painting contractor I always thought this might be a good add on service, but didn’t realize how simple it was. Thanks for the walk thru!
Great video very informative. Eastwood is a great product!😊
Definitely knobs trim etc people are getting tired of boring homes everyone is doing crazy shit now
That oven is nicer than the one in my kitchen😂
Some tips too. You could use the oven racks to hang from, then put it the oven without touching the paint. Let it hang from same wire you sprayed with. That way you don't mess up the powder in transport. Plus spraying over some sort of clean containment, you could reuse the paint.
I was thinking the same. Put a sheet of plastic on the floor. That was a no-brainer.
The oven rack may work but, then you get a powder coated oven rack. I'd like a explanation on how to transport it without getting fingerprints or tool marks in the powder.
His green is very splotchy. IDK how to stop that other than have the professional shops do it.
If he
If he had used white first it wouldn't be so splotchy , bare metal will do that. Like anything it just takes practice.looked like fun was set to high, usually it's put on slower.
Damn auto correct gun not fun
@@RalphSampson... if you take the oven racks out, and suspend them by line or bungee, whichever. Then attach whatever your spraying with line, like he did from the ceiling. You can attach the clamp to the wire and spray the part. You can wipe any powder off the oven rack if you want before bake. Then just disconnect the rack from the supports and slide it in the oven. I can't tell if his racks have that annoying thing that requires you to lift it at an angle to get out. If it does, he can cut the rack to allow it to slide in straight. Hope that clears it up.
This was a fantastic video. I never knew how easy it would be to powder coat. I can’t wait to try it some day. I’ve been doing cerakoat for years- I’m looking forward to the day I can try powder coating. Awesome content bro!
Amazingly simple. Loved the video. Easy to understand... no huge words. Good job Buddy. Thanks Jim.
Love your idea on the mason jars! But my husband will love it too! Can’t wait to use it!! ❤️❤️
I always thought powder coating was super hard to do but now I know it’s surprisingly simple!
Never would have thought I could powder coat at home! This is awesome!
My wife I and where just talking about this the other day.
I'd like your videos they are helpful thanks for being here for us. Tony.
Thanks for posting this video and teaching me how I can powder coat. Looking forward to seeing what I can do on my first attempt. You made that look awesome.
Great video! There are several videos out on powder coating, but you really simplified the process. I've been doing it with the harbor freight system. After seeing this, I'm gonna step up to the Eastwood. Thanks!
Excellent video. Your down to earth with your explanation . Definitely boosted my confidence. Great teacher
This looks so much easier than I was expecting!
Awesome, the whole process looks great and easy too do , I am sure with practice one can turn out great pieces, thanks for the video!!!😊😊😊
With 14 wheels there was no way I was gonna be able to get them all done anytime soon. This is a great video. Thank you very much. Eastwood has so many great projects, how too video, and deals all the time. My wife is gonna flip in the ease of use!!! I am glad I found your video by TOTAL accident. A follower now!
I have been wanting to add powder coating to my restoration business. Thanks for your video explaining powder coating for a garage / shop setup.
Very helpful video. I always wondered how power coat was applied. Seems simple enough. Thanks for sharing!
I never thought powder coating could be that easy. Great video.
I have my set of 15" factory Jeep wheels I'm just itching to try powder coating on. Eastwood has some really awesome products.
Thank you for the lesson! I recently got an opportunity to sell powder coating and wheel repair, so I needed to see it done. It's a fascinating process! Yes, I definitely imagined doing myself some time soon. Great video. Now, I'm a subscriber!
Glad it helped
Finally..... a real video - THANK YOU!
I've always thought powder coating was much more difficult than this. Great video and thanks for showing that it can be a DIY process!
Sounds like something I would like to try on my bike
Just a tip: I started with the older dual voltage Eastwood model years ago and still use it from time to time to this day. Try spraying around 5-7 psi and work a little more slowly. That system has its limits but that will help the coating come out more even. 👍🏼👍🏼
Awesome video! Really helpful with a great personality to boot!
Give this man a TV show for real!
❤ I'm always wondered about powder coating and you are the only one that I've seen demonstrate this and where it's available thanks for the information
I think you just convinced me to get a new toy! Had no idea how easy powder coating could be.
This video has been so helpful! I always wondered how hard powder coating was and this video made it look really simple, even though I know it’s messy and a little harder than you made it look. Lol
Thanks for the video looks pretty straightforward and simple by the way the rings turned out great thanks for the info I will be ordering a kit and start my own journey in powered coating
Pretty straightforward video of the basic process.. You'll make and you'll learn from any mistakes you might make. Watch videos, do some inquiring, try it over again, you'll get it right with some perseverance. Eastwood provides the videos and the products to accomplish a finish you can admire.. Everything you need in one stop shopping. Thanks Eastwood Co.
Good video! One thing I found that helps tremendously with adhesion (not as big of a deal with shiny new parts, but with older stuff that ends up being what I coated most) is to use a phosphate etching pre-treatment. I think i got mine from Columbia Coatings, but its been years so not positive. Really helped out when I used to rebuild old motorcycles.
So you're the one I should ask how do I get an oven large enough for a 1983 FXR Harley frame?
i could completely redo my lawn mower with this hahaha
Excellent how to video on powder coating. Good demonstration and oral communication/instruction on how to do the process, everything is in laymen terms. Video has give me an idea on a small business I could do in my now retirement days.
Good Information, sounds simple and the oven is a great find!!! good job with the video and thank you for sharing!
You have been a awesome addition to Bleepin Jeep brother! This is a great episode!!
Meh...debatable
@@SkyBlueOffRoad what does that mean? You don't like him huh?
Looks easy enough!
I am really happy to be a customer of Eastwood and enjoyed this video.
Great video, I bought the powder coating system that has the power converter as the product distribution from EastWood. Gonna do some RC parts for my crawlers etc. You did a great job explaining it in layman's terms.
That looks way to easy, I need to get me one of those and start makin a ton on ETSY so i can pay for jeep projects.
Thanks for the informative video. I never knew it was that easy to do at home. Would love to have that setup.
Excellent video, and nice finished product. Thanks for the introduction to powder coating.
Thanx for the video. Always thought that expensive stuff was needed for this. Thanx for opening my eyes in this.
Very good demonstration on how powder coating things. First time I see something like that.
Wow. Great news I have always wanted to try to powder coat. So much better than just paint. Thanks
Great Video! Very easy to follow explanation and instructions. I've got so many motorcycle parts I want to powdercoat now!
I'm an artist and you probably just set me on the powder cutting
This was every good learning experience. Because I want to repowder coat my wheels and lug nuts.
You do an excellent job instructing views how to do this at home. I am ready to buy one myself.
Eastwood makes nice products. It’s good to see videos that show us the pros and cons
That is so cool. And you did amazing with your demonstration. I've wanted to learn how to powder coat and try it but didn't think I would ever be able to get the knowledge nor the equipment needed to do so. Maybe I can now.
I found your video online and really liked it a lot I was looking at getting a powder coating kit to do just exactly what you are and doing it at home for motorcycle parts this was really helpful and looking forward to doing it at home
Thank you for video. Extremely useful since I don't know anything about powder coating. I was thinking about fishing lures and after watching this video I an going to go for it. Thank you again! The Best
sweet demo of powdercoating at home. Always wanted to try both powdercoating and anodizing.
Never know how easy this is. What to powder coat my calipers. Great video.
Wow!!! I thought it would be a lot more to it... That's as easy as it gets... Thank you for this video...
Great video. Just what I need to move ahead with DIY powder coating.
Extremely educational. Enjoyed watching you do the process, Thank you
You make it look so easy. I'd love to give it a go.
It's easier to do than I thought. Thank you, Bleepin Jeep!
I've been looking for this information, thank you!
Nice!! Thanks for the info. Plus the color is awesome.
Would absolutely love to have one of these, definitely going on my list of must-haves for my shop....
I've never known how to power coat..This video is very informative!!!
Absolutely love this video. I'm am ready to purchase my own set up.
Awesome video, answered all my questions. I am looking forward to powder coating in the future.
Thank you for showing how to get it done ! Definitely want to try this
Just came across your video on Powder Coat. ⭐️⭐️⭐️⭐️⭐️ Great beginner insight
Great video-helps take the guesswork out. I’m planning on building my over to powder coat my go kart/ mini bike frames. I’ll be interested in checking out eastwoods powder gun too. Thanks again for putting this video together for us newbies👍
Thank you because you are the only one person that explain step by step 💪👏👏👏 you deserve my following
Thank you
Love this I always just paint but knowing how easy it is to powder coat would be a nice addition to my skills and to my shop.
Eastwood products are so awesome. The shop is going to have to invest in a powder coat gun know that I know how easy the process was. Thanks for teaching us something new to do at home! Awesome video!
Thank you for this wonderful information, I'm a painter and hoping to do this powder coating as an additional skill to my craft. Im from the Philippines. Thank you and more power!
Very cool! What a great finish. And, thanks for making the video. I know I learned something
Great video, no nonsense. Just how to do it. Hopefully more people learn how to do a video from this.
Great video. You answered any questions I might have. Keep up the good work!
I have wanted to get into my own powder coating for awhile now. I am a do it myself kind of guy nowadays. I’ll damn near try to get into anything instead of paying someone. Allows me to learn new things, pass that knowledge along sometime down the road, and saves me money.
Never heard about powder coating before but wow can't wait to try it out.
I like how you got to it and didn't talk about things that don't matter. Also, liked the recap of what you do at the end. Thanks for making this video. Crossing fingers I win! Cheers!
Fantastic video best i have seen in ages, very informative. Keep up the great work
You did a Great Job!!! Love the color choice...
That was very cool. I have been wanting to try this myself and this video has given me somewhere to start. Thanks
Great video
I wanted to know how to powder coat at home and you hit the nail on the head. Well done!!
I was looking for a good video to explain step by step and I found it with yours. Thanks.
This video was very helpful and you where very clear in explaining how to powder coat step-by-step. (Awesome video)
Awsome video on powder coating. Simple . Was expecting it to be more difficult. Good video
That video made it look easy. Thanks for sharing!
Always wanted to use powder coating but didn’t know how to do it this video was really helpful. Thanks.
Going to have a go at this. Now I have the know how and I can come back to video for reference. Cheers mate
Thanks for the video! Thinking about getting started in my garage so very helpful!
Very informative! I was looking into powder coating some metal but needed the right start. Thx BleepinJeep!
That looks a lot easier than what I ever expected even I could do that and I just happen to have a kitchen oven I'm sure glad I watched this
Great video very helpful looking forward to trying it soon keep up the good work thanks.
Super useful video man! Thanks for the class, I’ll be giving that a try come next year. Appreciate the info😎🤙🏾
I always thought that powder coating was not for the DIY. After watching this video, I may even try it one day. Thank you for explaining it.
Can't wait to get better so I can try this before I got sick! Started doing electronics I made two tanks very excited
Thanks for the tutorial, Ive always wanted to powdercoat!
That is fantastic. Can’t wait to try one out.