One thing that sets your videos apart from others is the fact that you supply a link to every single thing you use in the description! That has helped me out so much with finding things I need to make my build easier!
Thank you for sharing your knowledge and helping me with my dirtbike and my motorcycle. That is so sweet how you can teach everyone who is passionate about riding and love to work on their own bikes. You are talented.
Hey man, I need to buy new plastics for my 2001 CR125, is there a newer year i can buy or should i just stick with the same year? UFO? I know you mentioned this before but i cant seem to find it. Thanks in advance! Rippin!
I got a Eastwood hot coat powder coating kit and was planning on doing mostly the same parts on my 2019 klx110L you always seem to come out with just the right videos at the right time!! Thanks!!! Lol....looks so good! Came out great, I got wet mirror finish black, I did the shifter so far cant stop riding it long enough lol I've changed it completely over from stock already tho cant wait to order the graphics kit tho, I was also thinking about going with teal on some smaller parts to help match the black and teal graphics anyways I'm done rambling, seems like I'm the only one into this stuff around here lol. Cant wait to see the CR250,!! I'm sure your tired of hearing that by now too lol anyways keep it pryme!!
I just did my engine covers on my bike but soon as I started torque down the bolts right where the bolts hit the powder coat the powder coat cracked off. I wonder if the media is old in the blast cabinet I used at work because it never gets used anymore..
Cameron, I’ve read a few reports that PC hold the heat longer than bare metal, have you read or experienced that? Concerns? Is that also the case with Cerakote?
Hey man you should always rotate an engine towards the front the bike, you could mess up the timing and put yourself into more work. Never fun! Keep it up tho, you make the best dirt bike wrenching vids out there!!🤘🏻
Hi there bro hope your keeping well mate been watching your vids for about 8 months now really impressed with what you do and the quality of your vids mate sounds bad but only just found out how to like and subscribe so sorry I’ve not been able to support u sooner bro I’ve just started making some vids my self and I’ve realised how much harder it is than it looks so well done mate god bless and I’ll be liking all your new content mate
Could you talk a bit about some of the different "girlfriend" bikes that are available like 80-110cc or possibly even trials bikes that are lower & lighter. Cameron Can Cook!
don't forget to put oil back in
you asked us to remind you :)
I wish you had done those triple clamps with the same red as the spring,,
One thing that sets your videos apart from others is the fact that you supply a link to every single thing you use in the description! That has helped me out so much with finding things I need to make my build easier!
Happy I could help man! Thanks for watching
had a feeling the frame and swing arm were next. great video
Thank you for sharing your knowledge and helping me with my dirtbike and my motorcycle. That is so sweet how you can teach everyone who is passionate about riding and love to work on their own bikes. You are talented.
This man takes pride in his work and takes no short cuts ever
Ryandean1 yes. It’s all in the details 👍🏼
Except for putting oil back in it. But hey. We're all human.
That lil XR is lookin'💯🔥 Keep up the grind, it's appreciated 💯👊🏻
Will that affect the engine cooling at all ?
You my friend are an absolute beast!!! I'm in love with that little bike, keep it up 👌🏻
@jesus jones make a stop on Mexico to pick me up, and I'll help you out 😜😄
Cams Custom Cycles never lets you down! Tuff looking bike for the young lady. Can't wait for the next one. Thanks
Awesome fun project!! Attention to detail is what sets any project apart.
Absolutely sick loving the Project! Keep up the good work
Nice bro can't wait for the next video seeing you both work together on the project will be great to see
Sick video Cameron I can already tell the xr is going to be bad ass
do you have to put the gasket grease on both surfaces like on the engine covers and on the clutch case?
Unknown Drifter yeah it put it on both sides
Love your work man can't wait till I have the financial backing to take on some nice projects myself 💞
13:13 WHAT A CATCH
Matty Mccolgan yo
That frame and swing arm need some powder coat. Good job so far 👍👍
Hey man, I need to buy new plastics for my 2001 CR125, is there a newer year i can buy or should i just stick with the same year? UFO? I know you mentioned this before but i cant seem to find it. Thanks in advance! Rippin!
I got a Eastwood hot coat powder coating kit and was planning on doing mostly the same parts on my 2019 klx110L you always seem to come out with just the right videos at the right time!! Thanks!!! Lol....looks so good! Came out great, I got wet mirror finish black, I did the shifter so far cant stop riding it long enough lol I've changed it completely over from stock already tho cant wait to order the graphics kit tho, I was also thinking about going with teal on some smaller parts to help match the black and teal graphics anyways I'm done rambling, seems like I'm the only one into this stuff around here lol. Cant wait to see the CR250,!! I'm sure your tired of hearing that by now too lol anyways keep it pryme!!
Should i remove the oil seal and bearing for powder coating the block engine? It will be damaged? Also if i want to powder coating shock absorber?
I just did my engine covers on my bike but soon as I started torque down the bolts right where the bolts hit the powder coat the powder coat cracked off. I wonder if the media is old in the blast cabinet I used at work because it never gets used anymore..
Paint the Honda letters white to make them pop!
It’d look sick with chrome bolts on the cerakote black
Wow because this is very good work! Congrats and keep it up.
Sweet I know it would be over the top but what about coating the engine side over bolt heads in burnt bronze?
hahaha once you go black you never go back! That's crazy how the valves have such a small tolerance.
Bro that was a great catch(handlebars) looks great man
Do u gotta worry about it getting hot I know it's baked on but my bike runs 215° idk if it will make it soft.
How hard is it to powder coat the entire outside of the engine? 10x the work?
And also that handlebar is looking a little bit rusty, It will be a good idea to replace it with an aluminium one 😁 keep it pryme 👌🏼
is the valve clearence the same spec as the xr 100? great video
Thanks! Yes same spec
Hey Cameron how much was it to resleave your cylinder on the 250?
Cameron, I’ve read a few reports that PC hold the heat longer than bare metal, have you read or experienced that? Concerns? Is that also the case with Cerakote?
Those cases look OEM, bro! gotta do this on my 200X...
JB weld the old Ignition cover ?
That catch of the bars falling 👌
looking Pryme young man! shout out from the west side of the state...
When you put grease on the gasket surface. Do you put it on both sides, or one side only?
I put it on both sides
Hey Cameron, really love the videos!
I’m wondering what air compressor you use for your blast cabinet and what your cfm looks like?
Untamed Society Thanks! I’m using a Ingersoll Rand 80 gallon. I believe it’s 18cfm
That bike is gonna be sick
Cameron, how do you decide when to powder coat and when to Cerakote?
I do powdercoat when there's no tolerances to worry about or I need a thicker finish. Cerakote for things with tight tolerances like triple clamps
For durability is Powder coat preferred? Is cerakote likely to be worn through easily?
Really hoping you do a CR500 AF Swap next!
Yet another master piece great job man🤙
Could you do a bottom end rebuild no one on RUclips has a video for this bike🙏🏼
Man... what I'd give to have a shop setup like that lol. One day :)
Nice. When buying a used bike I always look at the case covers to see how much the bike has been rode 😆.
Oh that's cool, but WHEN ARE YOU RIDING
Honey do bike! Looks sick! Cam Strong!
Better than new
Nice job on the honey do list! Lol,nice work Cam.
Awesome new look on the bike, when are you going to recoat the frame and swing arm? Or aint you going to do them
he did mention about tearing the bike apart and powder coating the frame and swing arm at the end of the video ;)
@@syedm9654 i must have missed it, my house was abit noisy i heard him say about the swing arm
@@braydengraymx4219 hahah I can't wait for the next vid anyway
@@syedm9654 yeah same loving these vids as always
You should put cr80 forks and triple clamps on it at some time, they make a huge difference, love the videos, keep up the amazing work🤘
You take this thing apart a lot 😂😂
😎 best thing on you tube as always keep em coming cam
when Honda parts are made does Honda spray paint them or powder coat them?
Most of the parts are sprayed with a urethane based paint out of a gun
@@CameronNiemela surely it's not as durable as powdercoat?
Looks dope!!! Nice job man
Excellent work brooo!!! thxs again!!!!
Love the STONE BLACK color. Love this channel! You always go the extra mile!
Hey man you should always rotate an engine towards the front the bike, you could mess up the timing and put yourself into more work. Never fun!
Keep it up tho, you make the best dirt bike wrenching vids out there!!🤘🏻
Beautiful work as always cam if your ever in so cal hit me up you always have friends down hear
Кэмерон спасибо за качественный контент!!!
Well done.
good job love your videos can't wait for cr 250 :D
Looking Good!
Can't wait for the cr250😁😁
This is a man who knows what the girls like, attention to detail.
What compressor are you using to sandblast?
Ingersoll 80 gallon 5hp
That beard is growing in fast
What size bike should i get im over 5'5 and about 130lbs and 14 what size bike should i start looking for
Yz 125 or kx 125 or any 2 stroke 125
125 2 stroke
Should open a side business for powder coating , i want my 4 wheeler frame and swing arm painted
@@julienvidegain5480 i was saying he should not me lol i have no experience
looks great!
Plz build an ATC 250r
bro, this bike will look like a 20,000 dollar bike!!!! great job!!!
You should do a video of parting out a dirtbike
What masking tape gets used
When are you gonna do plastics and that seat? Love the vids bro, Keep it up! Glad your healed up ❤️ F cancer
8:45 Nice.
Nice!!! Keep up the great work! 👍🏼
Hi there bro hope your keeping well mate been watching your vids for about 8 months now really impressed with what you do and the quality of your vids mate sounds bad but only just found out how to like and subscribe so sorry I’ve not been able to support u sooner bro I’ve just started making some vids my self and I’ve realised how much harder it is than it looks so well done mate god bless and I’ll be liking all your new content mate
How do you not loose bolts ever ??🤔
How much is a cost add that I put on
Hey Dude don’t forget the OIL
Looking sweet
+5 horse power
It’d be pretty sweet if you cerakoted the clutch cover bolts red
Need more scotch bright pads playa coming your way
Bro your shipping is fast high 5 my man
Hard to critique your work but, could have polished the side cover bolts. All good as usual.
Harsh but fare
Do you have a link for that respirator?
Yes, it's in the description
Could you talk a bit about some of the different "girlfriend" bikes that are available like 80-110cc or possibly even trials bikes that are lower & lighter. Cameron Can Cook!
Dont make it look too pretty, she won’t want to ride it haha. Wonderful work man! 🤘🏻
Sweet video, keep em coming...!
You should of done the head the shiny red
Wish you would of done it red
Cameron you should let people give you their bikes and a fat ton of money for you to factory them up!!
You like to mount things just to dismount them again huh 😄
Love the bike
What year is your CR 125
2005
Keep this kind of content 😉👌
Awesomeness
Im always wondering is there anything you don't know about dirtbikes
I don't know how to finish them hahaha
Put the Xr100r wheels on the bike in the same colors